How To Print TPU With Your K1 (MAX)
ฝัง
- เผยแพร่เมื่อ 22 พ.ค. 2024
- Wanted to share with you all how to print TPU quickly on your K1 Max with these simple modifications and settings.
The settings should work on other core xy machines with a similar filament path modifications, including the K1 and the K1C.
Link to my K1 Max Filament Spool holder for Flexible Material.
makerworld.com/en/models/163134
If you buy something through our “links” we may get a small share of the sale.
Filament Used From Amazon Naga Black Tpu 95A
amzn.to/3xgmoys
608ZZ Bearings
amzn.to/3VqvNO9
Diamondback Nozzle
amzn.to/43jY1M9
Amazon basics glue stick
amzn.to/4anggTU - วิทยาศาสตร์และเทคโนโลยี
thank you for video! very helpful
Thank you very much.
I have a question regarding using TPU/Flex PLA mixed with PETG as support because you can't feed TPU or any flex filament in the AMS and I need to feed it manually but I don't know how to do it through Bambu Studio. I had the same issue with TPU in my K1 so, I desgined an external spool wall support and I had zero issues with FLEX Pla to print the airless basketball ball but I couldn't remove easilly the support. How to do it in a Bambulab and how z height is the best to remove those supports if It needs it??
Flex pla was designed a bit more rigid than tpu, I have not personally printed with it. But my understanding is it has been blended with tpu. Which in turn increase its layer bonding by a bit. TPU with a PETG interface is harder then PETG to PLA but should still work for your intention.
After slicing, you adjust the layer slider (+) button on the right to the layer where you want the change. Right click on the (+) and select Add Pause. Repeat as needed, then click Slice again.
When the pause is reached, the toolhead will go back to the poop chute and wait for you to unload and reload the filament (see my earlier reply.) Then you hit Resume and it will pick up.
As for your Z height when im doing pla to to petg interface layers I change it to 0 Z height and the parts pull apart perfectly with 0 signs of an overhang. But on your curved piece that would be much more difficult also specific i don't think you can pause it only for supports.
Very helpful, do you have a link to the nozel you were talking about.
I do have another video up about the diamond back nozzle. It runs around 90$. I'll add a link to this video too.
It has been incredibly nice to only have one nozzle and not have to swap for different materials. Petg doesn't ball up on it like it does on hardened nozzles etc.
@@JATdesign thank you
Is that the regular interface on the screen of the K1 max or did you modded it? It doesn’t look at all like my K1.
It's a version of Klipper screen called guppy screen. Something you can do when you root the machine.
Thank you for the reply. I’ll look into it.
I’m having problems with my extractor printing tpu
I can try to help. What durometer? Did you follow all the steps in the video? What problems is it having?