The thing that I like with your videos is that you reuse sour diy tools, you don't do them only for the video like so much youtubers, that shox that the tool is really useful, that you really thought about his usability. you do a far detter job than so much other youtubers and your video quality is excellent
Always appreciate your videos. at 3:49 that tool you use to twist the stranded wires, did you modify the clip? I have some alligator clips and when I tried to twist the stranded wires it ended up making it worse. I pause at different times and it looks like it was modified? or maybe not.
Hello, you have very great projects! I have a doubt about the power supply, you use a 12v font, but what amperage is needed? thanks and I hope you continue making those excellents projects!
I know this is an older video, but I'm hoping that you will see this post. I was wondering if you have a link or the name of the "knife" you used from 8:27 - 8:35.
@@V.Perinski Thank you. It did not look like a deburring tool blades that I have. I looked at the link and they have the straight blades I was looking for. Thanks again. I really like your 3d models. I have spent a lot of time looking them over to learn some new design ideas.
On the project page I mentioned it. Motor I used from HDD Samsung SP0411N Nidec pl40. There are no links. Or www.google.com/search?q=HDD+Samsung+SP0411N
@@indrajitdesai7402 I have only one free instance of a similar motor available. However, if you provide me with another motor, I can create an alternative casing that will perfectly match this motor.
Thank you Yes, I made this UV lamp long ago to illuminate the photoresist in the manufacture of PCB. There is a photo : radiokot.ru/forum/viewtopic.php?p=3169792#p3169792
www.thingiverse.com/thing:3084138 www.thingiverse.com/thing:3092877 www.thingiverse.com/thing:3077335 and other standard, large and small, depending on the angle :)
Hi there, very neat projects. Found you on Thingiverse. About soldering, may I suggest you this. You don't need solder paste as there is rosin in the solder wire. But you must melt the solder wire in contact with the copper wire to get benefits of the rosin. May I ask yhere you got that aligator clip you use to twist the strands ? Regards.
Hi, thanks. This channel is a video tutorial for thingiverse projects. And I made a crocodile clip for twisting wires. This is not a solder paste but a flux, tinning occurs faster with it :)
Ahhh ok.. I’ll make this project and I didn’t see this information, that’s why I asked.. Thanks a lot for your attention and congratulations for your project..
Valera Perinski, another question: At minute 7:20 you start to cleaning the disk using a white liquid and after that you put the disk under a mini table that it seems to dry the part.. What kind of liquid is that and what tool you use to dry your disk?
Валера у меня двигатель немного другой формы. не поделишься исходником( в солидворксе или степ файлом)??? А все нашел исходники твои на сингиверсе, спс)))
hello, could you help me? the meaning is the same but on a step-by-step, the meaning is a carousel scorcher. I'm not good with CAD programs, but I got the idea to make a carousel one. Thanks.
The thing that I like with your videos is that you reuse sour diy tools, you don't do them only for the video like so much youtubers, that shox that the tool is really useful, that you really thought about his usability. you do a far detter job than so much other youtubers and your video quality is excellent
Always appreciate your videos. at 3:49 that tool you use to twist the stranded wires, did you modify the clip? I have some alligator clips and when I tried to twist the stranded wires it ended up making it worse. I pause at different times and it looks like it was modified? or maybe not.
I made this clamp myself, and I filed down the crocodile teeth.
@@V.Perinski Perfect I noticed that as well but thought maybe you bent them, idk why, again, thanks!
Where did you get the motor from?
Nice and neat design
Motor I used from HDD Samsung SP0411N Nidec pl40. www.google.com/search?q=HDD+Samsung+SP0411N
Hello, you have very great projects! I have a doubt about the power supply, you use a 12v font, but what amperage is needed? thanks and I hope you continue making those excellents projects!
I know this is an older video, but I'm hoping that you will see this post. I was wondering if you have a link or the name of the "knife" you used from 8:27 - 8:35.
Link in description: NOGA deburring tool and Blades - go.like-it.link/h5jhx
@@V.Perinski Thank you. It did not look like a deburring tool blades that I have. I looked at the link and they have the straight blades I was looking for. Thanks again. I really like your 3d models. I have spent a lot of time looking them over to learn some new design ideas.
Повторил. Спасибо за модели и идею!
can you provide a link of the bldc motor you used?
On the project page I mentioned it. Motor I used from HDD Samsung SP0411N Nidec pl40. There are no links. Or www.google.com/search?q=HDD+Samsung+SP0411N
@Valera Perinski can you suggest an alternate motor in case it's unavailable to me? Thanks btw...
@@indrajitdesai7402 I have only one free instance of a similar motor available. However, if you provide me with another motor, I can create an alternative casing that will perfectly match this motor.
hi I can't find the link to the motor used for the disk sander giant
There is a motor model in the description, you can still find it online. HDD Samsung SP0411N Nidec pl40 .
Please suggest an alternative motor for the same rpm and specifications...
Does a normal old hard disk have it?
I have a few old hard drives, but all have the same motors.
@@V.Perinski thanks:-)
отличное моделирование и вещица дельная получилась!
Is it possible to use PLA plastic? Or device heating more then 60°C?
Any plastic
Excellent!
hello, love your thingiverse projects!
btw, do you have a link for those wire rolls?
thanks!
www.thingiverse.com/thing:3019391
www.thingiverse.com/thing:4374397
Супер! Всегда приятно смотреть! 👍
Hi nice work, did you build this uv curing table yourself? Very impressing!
Thank you Yes, I made this UV lamp long ago to illuminate the photoresist in the manufacture of PCB. There is a photo : radiokot.ru/forum/viewtopic.php?p=3169792#p3169792
Which is your camera brand :)
Yi 4K+
@@V.Perinski have a nice designes :)
@@V.Perinski last qquestion, how you are fixing the camera, which tripod
www.thingiverse.com/thing:3084138
www.thingiverse.com/thing:3092877
www.thingiverse.com/thing:3077335
and other standard, large and small, depending on the angle :)
Hi there, very neat projects. Found you on Thingiverse.
About soldering, may I suggest you this.
You don't need solder paste as there is rosin in the solder wire.
But you must melt the solder wire in contact with the copper wire to get benefits of the rosin.
May I ask yhere you got that aligator clip you use to twist the strands ?
Regards.
Hi, thanks. This channel is a video tutorial for thingiverse projects. And I made a crocodile clip for twisting wires. This is not a solder paste but a flux, tinning occurs faster with it :)
А от чего ножки силиконовые?
Silicone bumpers v.1 - ali.pub/3n17mm
Silicone bumpers v.2 - ali.pub/3n17qb
Silicone caps - ali.pub/3n1aj8
Hello Valera.. I have a question: What kind of power supply did you use ?
12v . I have a powerful power supply, it is branched into various other devices.
Ahhh ok..
I’ll make this project and I didn’t see this information, that’s why I asked..
Thanks a lot for your attention and congratulations for your project..
@@Totisso Be sure to connect the motor so that the rotation is counterclockwise. Otherwise, the bearing will fail.
Valera Perinski, you don’t have the project step by step in pdf, do you?
Valera Perinski, another question:
At minute 7:20 you start to cleaning the disk using a white liquid and after that you put the disk under a mini table that it seems to dry the part.. What kind of liquid is that and what tool you use to dry your disk?
Валера у меня двигатель немного другой формы. не поделишься исходником( в солидворксе или степ файлом)??? А все нашел исходники твои на сингиверсе, спс)))
hello, could you help me? the meaning is the same but on a step-by-step, the meaning is a carousel scorcher. I'm not good with CAD programs, but I got the idea to make a carousel one.
Thanks.
hello, I do not quite understand what kind of carousel
Маэстро!
cool
😍😍😍😍😍