If they looked this good out the box, I'd probably be tempted to purchase one... or three. I still can't believe how dirty they did the JP Raptors, of all the Dinosaurs.
these look better than the stock bits, but I'm gonna pass, i think the MarcoMakes kit looks a bit better and the feet (toes, more accurately) still have the side tilt
I'm thinking of repainting a hammond collection raptor but taking the battle damage blue head and installing it on the hammond collection figure even if the raptor squad will inevitably be released sometime down the line. Just thought it'd be a fun experiment because I have 1 extra of each figure.
Hi, I am not sure if you had a chance to work on this in a previous video, but were you able to use the replacement teeth/eyes from Syrett Tech for your Hammond Collection T-rex?
@@ericv234 same with mine, apparently some people's Rexes had a harder material for the head which cracked easier, and Mattel used a ton of glue on mine, no amount of heat would dissolve it.. really unfortunate
@@SpoodleyDoodles yes the little pegs and pegs holes were all melted even the eyes were all melted the hinges from the lower jaw and the upper jaw ended up breaking smh some one didn't a sorry job at the mattel production line! I emailed them if I can buy a replacement head but no reply.
Interesting! I want some mods for Hammond collection! How much do the replacement feet of Rex cost? And are they in stock. And where do I get them from
Do you know what kind of hip joints are used in the Hammond Collection figures? I have a Dilophosaurus that has a really loose hip. It turns nicely, but moving it outwards away from the body it is super loose.
Soooo much better than the garbage Mattel barfed out. Too bad he doesn't have replacement "shins", since they look way too thin even with the improved feet.
The problem is that its $32 per kit, i could buy the hammond collection ceratosaurus from less and the capture and crush truck for the same price. If it were like $12-$15, then we'd be talkin.
@@theinkslicer I get that but I'd much rather cut down the feet to make them smaller than pay $32 for all of that. plus I'd also rather put that money towards the upcoming JP3 raptors since from the looks of it they have the enhanced neck articulation like the dilo.
why don't these people just make some third party figures, if you're buing the Mattel ones just to complain and customize them in the end with third party kits, then just get third party figures that are more accurate and probably better overall
If they looked this good out the box, I'd probably be tempted to purchase one... or three. I still can't believe how dirty they did the JP Raptors, of all the Dinosaurs.
these look better than the stock bits, but I'm gonna pass, i think the MarcoMakes kit looks a bit better and the feet (toes, more accurately) still have the side tilt
Omg man! I forgot about you! So glad I saw your video on my recommended, now I remember all the memories…
I'm thinking of repainting a hammond collection raptor but taking the battle damage blue head and installing it on the hammond collection figure even if the raptor squad will inevitably be released sometime down the line. Just thought it'd be a fun experiment because I have 1 extra of each figure.
you also need to get replacement teeth for the hammond collection T rex, and replacement feet for the indoraptor.
Can't wait to get mine!
This looks way better really cool 👍👍
Hi, I am not sure if you had a chance to work on this in a previous video, but were you able to use the replacement teeth/eyes from Syrett Tech for your Hammond Collection T-rex?
I was gonna ask that to a while back theres a video on ig but I ended up damaging mines really bad 👎
@@ericv234 same with mine, apparently some people's Rexes had a harder material for the head which cracked easier, and Mattel used a ton of glue on mine, no amount of heat would dissolve it.. really unfortunate
@@SpoodleyDoodles yes the little pegs and pegs holes were all melted even the eyes were all melted the hinges from the lower jaw and the upper jaw ended up breaking smh some one didn't a sorry job at the mattel production line! I emailed them if I can buy a replacement head but no reply.
@@ericv234 when did you send an email?
@@tyrannosaurus8583 going on 2 weeks now I sent pics and all the other stuff they requested but no reply 😒. You got the same problem?
Can’t wait
How do you prevent the super glue from making the claws look white when the glue dries?
So I'm not the only one who thought the heads were off on the original
look's actually pretty *good*
Interesting! I want some mods for Hammond collection! How much do the replacement feet of Rex cost? And are they in stock. And where do I get them from
You can buy them in Etsy but the feet is like somewhere around I think 50
No there 36
There in stock
@@MrGlbert1999 alr, thanks!
No prob bud and also new subscriber
Are there any upgrades for the Hammond Collection Dilo yet?
Do you know what kind of hip joints are used in the Hammond Collection figures? I have a Dilophosaurus that has a really loose hip. It turns nicely, but moving it outwards away from the body it is super loose.
Can you do a hammond collection dilophosaurus or triceratops?
The next level 😎
Can u do the blue version? I’m working on the colors for blue
This is very good very nice
Want to try the Hammond Collection Buck Rex head and feet
Oye podrías repintar el iguanodon de Jurassic world dominio para que se vea idéntico al de la película
Etsy is a safe plase?
Can you please do some more Hybrids?
The problem for me is that it's too much money and isn't on Amazon
Plz do a toy photography video!
I WANT THE RAPTORS TO
In all honesty i prefer the stock raptors. It feels a bit more natural to me than the emaciated snoot
Seriously why can't the official ones be like this?
1000% better.
The clever girls are out of stock
Soooo much better than the garbage Mattel barfed out. Too bad he doesn't have replacement "shins", since they look way too thin even with the improved feet.
man this kit really turned this figure from a dud to definitive
The problem is that its $32 per kit, i could buy the hammond collection ceratosaurus from less and the capture and crush truck for the same price. If it were like $12-$15, then we'd be talkin.
@@reverbtheraptor8529 well they're kits done by one guy with his own money
@@theinkslicer I get that but I'd much rather cut down the feet to make them smaller than pay $32 for all of that. plus I'd also rather put that money towards the upcoming JP3 raptors since from the looks of it they have the enhanced neck articulation like the dilo.
This is what Mattel should have release in the beginning 🤦🤦🤦
😀😃😆🤣🥰😍🤩🥲🫡🤑
why don't these people just make some third party figures, if you're buing the Mattel ones just to complain and customize them in the end with third party kits, then just get third party figures that are more accurate and probably better overall