Chat got closed on me, so if I didn't get around to answering your questions I'm super, super sorry! Comment below this comment to tell me what you want to see in the next PREMIERE! Loved talking with you guys and can't wait!!
For those still wondering how long it takes to apply water slide decals, it’s taken me 8 hours to do just over half of a sheet (Shenlong Liaoya). There are usually more than you need, especially for Ver.Ka kits. It’s painfully slow as you sit and wait for the decal to soak and then you meticulously adjust it. It’s exhausting work.
A tip that I find that makes it not as bad is do put the decals after you finish the part so if you are on the body build it put the decals on the next step then decals...it helps me alot to do it that way
@magistersolis.3750 Destroy?? That’s not supposed to happen, I’ve only experienced that with 30 year old decals. You cut around the decal so you have paper to grab with tweezers. Then you hold the soaked piece of paper, with the tweezers but not on the decal itself. Hold it up to the place where you want to place it. Use another tool, like the blunt end of a needle, to slide the decal from the paper to the area. Adjust quickly and decisively. Dab with tissue gently to soak up the water. When it’s all dry it’s best to apply a clear coat or they might fall or scratch off after a while.
While that's impressive , as a half gunpla ，half military kit modeller , 3 days isn't that much to me , a 1/72 scale's decals has taken me 6+ days to complete (mainly cause of tiny decals in the cockpit)
@Jessi Maldonado which version of the wing gundam are you talking about here exactly because all of the MG has been solid, with the Wing EW being the worst.
For anyone who's still interested in this kit, I recommend that you tighten the joints during the build especially on the legs, I also made the fin funnels better on my kit by tightening the dented connectors, make sure that you only add glue or whatever you use to tighten joints on the 3 little dents that go towards the exterior of the funnel to connect to the other one, and not all around the connector tho, because if you do it's gonna be harder to detach and put away to the opposite side.
For me, the RX-93 Nu Gundam has an historical importance in the UC timeline as it was the major turning point and the end of histories most great rivals Amuro Rey and Char Aznable... CCA has to be my most favorite Gundam movie in history
For MG Nu ver ka, it took me 10 hours straight to do all waterslides for it, as well as the HWS expansion set and double fin funnel expansion set. Was quite the time honestly. Didn't expect to finish it all in one sitting while listening to music
I might be mis-remembering, but one thing I really loved was the fact that when a mobile suit picks up a weapon, there is a slot in the manipulators the weapon handle interfaces with (Seen in 08MS Team) in order to install/load the weapon for use, kind of like plugging in a USB for your mobile suit! That's what I like to think of when I see the tabs in the PG style hands
I absolutely ADORE this kit, it was actually my third MG kit but I loved the Nu Gundam design so much that I couldn’t wait even though I wasn’t sure that I was ready at the time. I have placed all the water slides and I admittedly took my time but it took me well over a week. But it looks fantastic with them all on!
Yeah, he would have to keep it on the stand for the review and not use the turntable. Although, I never had a hard time with mine staying together armored up.
I’ve watched this review probably 4 or 5 times and it’s just because of how much I love your videos and this kit. It’s like a perfect combination. I even have the kit and it’s the centerpiece of my entire display.
When it comes to beauty, I get a hard time between the Nu Gundam and the 00 Raiser. These two beasts do own my heart. Damn! Thanks for this awesome video!
I used around 30% of the decals (I didn't want to overcrowd the original design) and it took me a whole week... then I forgot microsol and half a dozen fell out....
Small correction: The Nu does NOT have a full psycho-frame canonically, just around the cockpit. This is a non-canon Katoki redesign. EXCELLENT review!!!
Full Psycho frame is the coolest. Its very subtle which makes it perfect. plus im a fan boy for clear parts. The original Nu Gundam only has psycho frame around the cockpit which i love how Katoki added a little nod to that during the build, its a shame thats its hard to display the cock pit though,. you should've touched on that buy taking a picture during the build because the cockpit looks so effing awesome.
Always wanted to build the Master Grade Nu Gundam. Been doing the hobby for a year now and I've really fallen in love with the hobby, and the Master Grade Nu Gundam is one I'm setting my sights on to do real soon. Thanks for this great review. Really helpful
Ive watched this like 20 times and ive decided to buy this in the future as my 1st ver ka kit onced ive become a better builder. Your reviews really help me alot on my gunpla buying choices
God I love this kit Currently trying to get the GN arms type D And 2 hws sets to make with some plastic plates to make a thunderbolt style FULL ARMOR NU GUNDAM
Yes they do. I completed the Sazabi Ver Ka in less than 2 days. It's taken me almost 4 days to apply all the decals...and I'm still not completely done
that decal sheet drived me nuts especially the lil' one's..I think I applied a bit just the large one's but all in all this kit is glorious! love your review's man
Just completed mine as my first Gunpla...30+ hours and only the decals must have took me around 8-9 hours to complete. But it looks so good. I'm really happy with it.
I owned this and personally it's one of the best kit I have built. The water slides is tedious but you really can't live without it. I just love the KA/RG level of details. The fin funnel is a nightmare to pose. 4 is the right number to get it stick on most of the time.
I remember getting this when I first came out. I think I'll rebuild it sometime in the future, along with my first MG, the God Gundam. Also, my response to the foil and the color change stickers is "Screw that, I'd rather just paint it."
@@josephdones656 Don't think any company will sponsor it since its already sold out and the purpose of sponsoring is to make more sales but you can't sell something that is sold out.
took me 20-hours to build my Nu Gundam plus the decals! it's tedious but the outcome was great with all the decals/stickers applied. a satisfying feeling when you look at it all Glorious with all the decals!
I recently completed this kit as my first ever MG after building several HG. strangely enough I didn’t have the same problem with the beam saber. My saber parts hold in the handle fine. I first watched this after building the whole body and decided to build the two small fin funnel wings for stability. i’m glad i did that. The connection on them should have just been a pair of 30mm pegs that just flip out of hiding. I did have a problem with floppy wrists holding the gun though. it truly is gorgeous and has great details though and the hands add to that
Im super late to the party but i juat bought the sazabi ver. Ka to go with my NU ver. Ka and didnt realise i hadnt panel lined either. Literally panel lining the NU gundam as i watch this haha awesome video
Ver Ka Sazabi is still my favorite gunplay to date. Thing is massive and the transformation makes me so happy...need this one soon for posing purposes!
3years later, but one of my usual gunpla suppliers (in the UK) just got this kit in a restock, so I rewatched the video and ordered for my backlog, which is just MG Heavyarms and this at the moment (the great 2022 MG drought) but looking forward to a full airbrush paint and build. Also looking forward to the “witch from mercury” videos and hoping Bandai announce MG kits for that series
@@swivelboiiguess6422 "A mobile suit made by Anaheim Electronics, it was developed as a prototype for the RX-93 ν Gundam, testing the Psychoframe, and many portions of its body are made from identical parts." quoting the gundam wiki
I put all the water slides on the mega unicorn and it took me about 2 hrs. And those were BIG! But I would like to see more ver. Ka and RG reviews. Keep up the good work and thank you.
My trick is to paint the the gray parts black with spray paint on the runners, after that, mist them with a metallic spray paint to get a grainy metal look and a matte top coat, for the hi lights i go in by hand one i build it and the build comes out pretty solid since the layers of spay paint are also on the part that there is gonna be friction so it gets pretty tight and i get a much more realistic looking metallic finish then i would pain stalkingly get by hand painting, if your wondering what about the nubs, i just re touch it with some paint and brush. NOTE THIS ONLY WORKS IF YOU CLEAN YOUR NUBS CAREFULLY WITH A HOBBY KNIFE
I love my MG ver.ka nu gundam It still holds up pretty dang well and still one of my favorite master grades although I keep the funnels on the stand as it is still a pain to deal with but other than that it's a great kit.
With the Ver. Kas that I built, I still love the Sazabi. I know this is going to be controversial, but doesn't the MG Freedom 2.0 hold more shelf presence than the Nu? With my experience, people who don't watch anime rated the Freedom 2.0 higher than the Sazabi 😭 (this is when straight built, I'm sure painting it would make a world of difference)
I'm torn between this or the Sazabi Ver. Ka!! I have both of them in RG and love them both but just can't decide which MG I should go for first!! LOVE YOUR VIDS!! from New Zealand!!
Great review. I was wondering how great this kit was and have to say more meticulous than I imagined. Also, I would love to see a review of the MG Spiegel Gundam (Shadow Gundam).
I concur with the construction of the legs, they tend to take the longest time when building an MG. Took me a good 3-4 hrs to get my Hi-Nu Ver.Ka's legs up.
Reimagining is a good way to put the Psycoframe yes, considering the original Nu Gundam only ever had its psycoframe on the cockpit. The Ver. Ka is literally the only version of the Nu Gundam with psycoframes on the rest of the body.
Great review Mecha Gai ! I decided to get the HiNu Ver.ka over the Nu Ver.ka and I don't regret it at all, with the HWS it is easily one of my favourite MG
Hey Mecha Gaikotsu, I was thinking that legendary kits like the Sazabi and Nu Gundam... should need a short introduction just paying respect to the major role they played. . . . Sorry! When I see or think of these two MS... I can't stop crying, call me a fanatic but man does it hit the heart seeing these two beauties and their respected pilots. As a matter of fact the Remains of MSN-04 Sazabi are still on axis wandering in space two this day.
The best MS design for me is OO. I like the way it has sleek yet edgy lines, not too bulky. The feet could do some work, but the way the joints move and how its articulated is awesome. Next is the Norn. A black, imposing gundam with fiery orange streaks. Then, Freedom. That its a good all around suit without being excessive like the SF makes it to my list.
Chat got closed on me, so if I didn't get around to answering your questions I'm super, super sorry! Comment below this comment to tell me what you want to see in the next PREMIERE!
Loved talking with you guys and can't wait!!
Have you heard of Gundam Battle Gundam Warfare mobile game? What's your thoughts about it?
The bandai eva 06
I’d love to see some 1/100 NGs from Gundam 00.
MG banshee Ver Ka?
Love your vids and what about mg unicorn pls
For those still wondering how long it takes to apply water slide decals, it’s taken me 8 hours to do just over half of a sheet (Shenlong Liaoya). There are usually more than you need, especially for Ver.Ka kits.
It’s painfully slow as you sit and wait for the decal to soak and then you meticulously adjust it. It’s exhausting work.
U went where we were too afraid to go
A tip that I find that makes it not as bad is do put the decals after you finish the part so if you are on the body build it put the decals on the next step then decals...it helps me alot to do it that way
tamiya mark fit helps a lot with water decals
I despise water slides so much, the normal stickers are so much better when they’re cut seamless, SO much less hassle
@magistersolis.3750 Destroy?? That’s not supposed to happen, I’ve only experienced that with 30 year old decals.
You cut around the decal so you have paper to grab with tweezers.
Then you hold the soaked piece of paper, with the tweezers but not on the decal itself.
Hold it up to the place where you want to place it.
Use another tool, like the blunt end of a needle, to slide the decal from the paper to the area.
Adjust quickly and decisively.
Dab with tissue gently to soak up the water.
When it’s all dry it’s best to apply a clear coat or they might fall or scratch off after a while.
Fun fact: The MG Nu Gundam Ver KA was the first Master Grade to feature PG-style “emotion manipulator” hands.
I dunno, I thought it was interesting.
Always have mix feelings towards those types of hands
It's true! They're also scaled to it that's why they look silly on any version of the RX-78-2
A HG 1/60 Gundam has also a movable parts fingers.
Well, that just makes it more attractive to me.
Mecha Gaikotsu Yeah, I always thought they looked a little on the chunky side with smaller MS. Some big boy hands right there.
MG ZZ Ver ka took me 3 days to apply all the decals *in the manual.* Yes, there were leftovers. No, I'm not using them.
Jesus Christ
Dam
The dedication
I dont even put decals beside if it's really needed
the lion
the witch
and the sacrifices this man made to make his gunpla look rich
While that's impressive , as a half gunpla ，half military kit modeller , 3 days isn't that much to me , a 1/72 scale's decals has taken me 6+ days to complete (mainly cause of tiny decals in the cockpit)
Liar
Katoki is known for making realistic designs... *Stares in Wing Zero EW*.
It's more like it's what they said he should do.
We're taking about a bipedal war machine here.
@Jessi Maldonado which version of the wing gundam are you talking about here exactly because all of the MG has been solid, with the Wing EW being the worst.
Well it's here soo
here it comes
For anyone who's still interested in this kit, I recommend that you tighten the joints during the build especially on the legs, I also made the fin funnels better on my kit by tightening the dented connectors, make sure that you only add glue or whatever you use to tighten joints on the 3 little dents that go towards the exterior of the funnel to connect to the other one, and not all around the connector tho, because if you do it's gonna be harder to detach and put away to the opposite side.
For me, the RX-93 Nu Gundam has an historical importance in the UC timeline as it was the major turning point and the end of histories most great rivals Amuro Rey and Char Aznable... CCA has to be my most favorite Gundam movie in history
The mecha design of nu gundam and sazabi itself really catch my eyes, you should collect both kit
Gotta say same
I find it funny he size compared it to an almond, but not a ruler... xD
You see, I had an almond.
Not a almond. *TWO almonds*
For MG Nu ver ka, it took me 10 hours straight to do all waterslides for it, as well as the HWS expansion set and double fin funnel expansion set. Was quite the time honestly. Didn't expect to finish it all in one sitting while listening to music
FA Gundam Thunderbolt Part 2 pls :3
It is finally out lel
Appreciate your covering an older MG. I always Trust your reviews for good builds 👏🏼👏🏼 MG Sazabi next time pls
No one:
Mecha: TWO ALMONDS!
No one:
Mecha: ABSOLUTELY AND UTTERLY
Come on, I think the Sazabi Ver Ka is much more than a glorified statue.
It's a solid model, with great mechanism, and excellent posability !
only lazy people would say its a glorified statue
I might be mis-remembering, but one thing I really loved was the fact that when a mobile suit picks up a weapon, there is a slot in the manipulators the weapon handle interfaces with (Seen in 08MS Team) in order to install/load the weapon for use, kind of like plugging in a USB for your mobile suit! That's what I like to think of when I see the tabs in the PG style hands
I absolutely ADORE this kit, it was actually my third MG kit but I loved the Nu Gundam design so much that I couldn’t wait even though I wasn’t sure that I was ready at the time. I have placed all the water slides and I admittedly took my time but it took me well over a week. But it looks fantastic with them all on!
So uh we getting part 2 on that full armor gundam?...
No?...
ok
Didn't even respond SMH
Imagine being in 2019 and still asking that
Kek
He’s already explained that it was an absolute pain in the ass to get it to stand up and stay together while filming it, that’s why there’s no part 2
Yeah, he would have to keep it on the stand for the review and not use the turntable. Although, I never had a hard time with mine staying together armored up.
Guess what comes out next monday?
I’ve watched this review probably 4 or 5 times and it’s just because of how much I love your videos and this kit. It’s like a perfect combination. I even have the kit and it’s the centerpiece of my entire display.
When it comes to beauty, I get a hard time between the Nu Gundam and the 00 Raiser. These two beasts do own my heart. Damn!
Thanks for this awesome video!
I used around 30% of the decals (I didn't want to overcrowd the original design) and it took me a whole week...
then I forgot microsol and half a dozen fell out....
What's microsol?
@@nisnast light solvent to fix decals in place
I'm actually more interested as to when you got married. Still love the Ver Ka though.
I have the HGUC Nu Gundam HWS, can't wait for the RG Nu Gundam.
Small correction: The Nu does NOT have a full psycho-frame canonically, just around the cockpit. This is a non-canon Katoki redesign. EXCELLENT review!!!
You’re reviews aren’t so entertaining and aren’t dull at all my guy you’ve come extremely far! Keep up the good and entertaining work
That full exposed psycho frame version is absolutely 🔥 in my opinion
Full Psycho frame is the coolest. Its very subtle which makes it perfect. plus im a fan boy for clear parts. The original Nu Gundam only has psycho frame around the cockpit which i love how Katoki added a little nod to that during the build, its a shame thats its hard to display the cock pit though,. you should've touched on that buy taking a picture during the build because the cockpit looks so effing awesome.
Hey how about that part 2 for for Full Armor Gundam Thunderbolt Ver. Ka? Don't know why you haven't finished it yet.
Goblin Slayer he got overwhelmed by it
At 5:59 when you said "I'm gonna say it any ways" a ad popped up "Oh Oh Oh, Oh Reilly's, Autoparts".
Wise words...
Always wanted to build the Master Grade Nu Gundam. Been doing the hobby for a year now and I've really fallen in love with the hobby, and the Master Grade Nu Gundam is one I'm setting my sights on to do real soon. Thanks for this great review. Really helpful
😊👍
Those stickers are actually good! Premium af, never peel off
The amuro decal actually goes on the kit's left shoulder armor instead of the sheild, there's a specific sheild sticker included :)
In my opinion it’s one of the best Gundam(s) that I have had the glory of putting together. I have friends that wou Ltd definitely disagree
Wou ltd?
It was meant to say. I have friends that would definitely disagree
Couldnt agree more, I would like to build it more than once haha
“Unicorn 2.0 onegaishimasu”
*Bandai drop MGEX with x4 price and gold sticker for the V-fin* orz
Ive watched this like 20 times and ive decided to buy this in the future as my 1st ver ka kit onced ive become a better builder. Your reviews really help me alot on my gunpla buying choices
God I love this kit
Currently trying to get the GN arms type D
And 2 hws sets to make with some plastic plates to make a thunderbolt style
FULL ARMOR NU GUNDAM
Those perfect grade hands need to be standard.....and that tab-in-hand weapon holding system
Boi, attaching dem decals sometimes take longer than the actual build! 😂
Yes they do. I completed the Sazabi Ver Ka in less than 2 days. It's taken me almost 4 days to apply all the decals...and I'm still not completely done
that decal sheet drived me nuts especially the lil' one's..I think I applied a bit just the large one's but all in all this kit is glorious! love your review's man
Oh look.
Full Armor Gundam.
Would be nice if we got a Part 2
Now would it?
Just completed mine as my first Gunpla...30+ hours and only the decals must have took me around 8-9 hours to complete. But it looks so good. I'm really happy with it.
I’m excited for my RG Nu.
same here....hope they fixed those funnels....
Me too! It's out this Friday!
So hyped
Same, hopefully usagundamstore ships them out asap
@@adamszuszkiewicz1709 We're probably getting them in September : |
So I remember getting a ver ka as my first gunpla for my 14th bday. Was not a good idea giving a 14 year old beginner a ver ka
Oof, how did that go?
Mecha: I’m gonna say it anyway..
Ad: CRABFEWT IS BACK
I owned this and personally it's one of the best kit I have built. The water slides is tedious but you really can't live without it. I just love the KA/RG level of details. The fin funnel is a nightmare to pose. 4 is the right number to get it stick on most of the time.
no one:
mecha gaikotsu: A B S O L U T E L Y
The 2 almonds really put the size in perspective for me, luv you mecha you open my eyes to new sights everyday
Took me about a week ane a half to get all the decals on...
Damn!
Really? Interesting, it takes me about 2 hours to put on all the decals on a real grade kit and they have a lot
thats insane. but bravo
I remember getting this when I first came out. I think I'll rebuild it sometime in the future, along with my first MG, the God Gundam.
Also, my response to the foil and the color change stickers is "Screw that, I'd rather just paint it."
The real question is...are you getting the metal structure version?
Probably not, unless one falls out of the sky in front of me...
That thing is silly expensive....
Can I make it a tax write off?
Mecha Gaikotsu Do you have any chance of getting it with a channel sponsor?
@@MechaGaikotsu Hope you get one from sponsors. that's gonna be epic.
@@josephdones656 Don't think any company will sponsor it since its already sold out and the purpose of sponsoring is to make more sales but you can't sell something that is sold out.
@@MechaGaikotsu how have you NOT made any of your Gundam purchases Tax Write-offs?? They’re necessary for your job, they should 100% count.
Thanks for the almonds comparison. It was critical to my understanding of the size of this kit.
MG sazabi ver ka next pls
Bud, been following your channel for a long time. Love it. Didn't know you were irish? Lived in Dublin for 6 years. Loved it. So many friends there.
15:30 I have a Molotow chrome pen I use for this kind of thing all the time.
A good one for the monday night premiers would be The mg 00 7 sword/g you always use for comparisons which if memory serves you have never reveiwed
MG Nu Gundam: Man we look great.
MG Nu Gundam: Yes, our Owner really loves us.
RG Nu Gundam: Oh yes, your owners will love you both.
took me 20-hours to build my Nu Gundam plus the decals! it's tedious but the outcome was great with all the decals/stickers applied. a satisfying feeling when you look at it all Glorious with all the decals!
Between this and the MG Dynames, I'm conflicted on which one looks more beautiful.
both are amazing
I recently completed this kit as my first ever MG after building several HG. strangely enough I didn’t have the same problem with the beam saber. My saber parts hold in the handle fine. I first watched this after building the whole body and decided to build the two small fin funnel wings for stability. i’m glad i did that. The connection on them should have just been a pair of 30mm pegs that just flip out of hiding. I did have a problem with floppy wrists holding the gun though. it truly is gorgeous and has great details though and the hands add to that
3:17 ironic that i recently broke my sinanju ver ka
This will be my next Gunpla to assemble! Thanks for the video!
The almond was probably one of my favorite things about the review
Can't wait for him to review the almond 2 pack.
Im super late to the party but i juat bought the sazabi ver. Ka to go with my NU ver. Ka and didnt realise i hadnt panel lined either. Literally panel lining the NU gundam as i watch this haha awesome video
Holly crap you have TWO almonds? Those sold out in a day and haven’t been restocked in months!
Lol, mine are still in HLJ's private warehouse 😂
Can't wait to see a review of the 2 almonds.
@@TheFr0z3nF0x they HAVE to be master grade - have you seen the surface & panel detail!
I really needed that two almond size comparison, thank you.
I'd like to see you reviewing the Aegis gundam from Gundam Seed :D
I do love that Aegis.
Sort my videos by oldest first. It’s not pretty...
Ver Ka Sazabi is still my favorite gunplay to date. Thing is massive and the transformation makes me so happy...need this one soon for posing purposes!
So disappointed that the RG doesn't have the psycho frame, I love it when it's used minimally like in the nu ver ka as apposed to a unicorn or w/e.
It's not supposed to have it. It's something Katoki added.
3years later, but one of my usual gunpla suppliers (in the UK) just got this kit in a restock, so I rewatched the video and ordered for my backlog, which is just MG Heavyarms and this at the moment (the great 2022 MG drought) but looking forward to a full airbrush paint and build. Also looking forward to the “witch from mercury” videos and hoping Bandai announce MG kits for that series
Ah, the great drought, another uk gunpla addict feeling your pain here buddy!
Another UK gunpla fan here and waiting for this and the Hi-Nu to be delivered
Narrative has the same shield design, now you are reviewing this kit 🤔
Well, the narrative was what the nu was based on wasn't it?
@@adamszuszkiewicz1709 no the narrative is based on the nu by taking it's inner frame
@@swivelboiiguess6422 "A mobile suit made by Anaheim Electronics, it was developed as a prototype for the RX-93 ν Gundam, testing the Psychoframe, and many portions of its body are made from identical parts." quoting the gundam wiki
The best video. Ilove your Channel.. KeepitUp!!!
"No it's not the led unit in it's neck it's the mg nu gundam ver. Ka"
As i wish he said that
I put all the water slides on the mega unicorn and it took me about 2 hrs. And those were BIG! But I would like to see more ver. Ka and RG reviews. Keep up the good work and thank you.
"They haven't moved an inch"
The stickers aren't even half an inch long
My trick is to paint the the gray parts black with spray paint on the runners, after that, mist them with a metallic spray paint to get a grainy metal look and a matte top coat, for the hi lights i go in by hand one i build it and the build comes out pretty solid since the layers of spay paint are also on the part that there is gonna be friction so it gets pretty tight and i get a much more realistic looking metallic finish then i would pain stalkingly get by hand painting, if your wondering what about the nubs, i just re touch it with some paint and brush. NOTE THIS ONLY WORKS IF YOU CLEAN YOUR NUBS CAREFULLY WITH A HOBBY KNIFE
Finally a nu gundam review, thanks for reviewing the old kits, would like to see other older kits review like Gundam MK II RX-178 =)
Full Armor Part 2 onegaii
ONEGAISHIMASHTA
No wonder I love the Ver. Kas so much. 0083 has my favorite Gundam Designs.
love that tiny meat gang clip at 4:46
Probably took me 5-6 hours to decal everything. I love this kit so much, hope we get a PG of this mobile suit someday
Personally, the MG Dynames is the best one to me.
The articulation and tight joints for dynames is waaaaaaaayyy too good to be true meyt
I love my MG ver.ka nu gundam It still holds up pretty dang well and still one of my favorite master grades although I keep the funnels on the stand as it is still a pain to deal with but other than that it's a great kit.
Well, guess I'm super early...
Great video!
I love this format for longer in depth reviews (of older kits).
With the Ver. Kas that I built, I still love the Sazabi. I know this is going to be controversial, but doesn't the MG Freedom 2.0 hold more shelf presence than the Nu? With my experience, people who don't watch anime rated the Freedom 2.0 higher than the Sazabi 😭 (this is when straight built, I'm sure painting it would make a world of difference)
I'm torn between this or the Sazabi Ver. Ka!! I have both of them in RG and love them both but just can't decide which MG I should go for first!! LOVE YOUR VIDS!! from New Zealand!!
But can it giggity?
Yes
Just got it recently for my birthday! I wanna squeeze out as much as I can from the kit so I'm gonna apply *all* of the water slides
I like the video idea. The kit looks really cool, and I don't even usually care that much for the Nu.
Nice ZoE Anubis in the background there 😂 One of my early favorite figures
Was so excited when he said the video was live, than realize its 2 hours later. R.I.P
Great review. I was wondering how great this kit was and have to say more meticulous than I imagined.
Also, I would love to see a review of the MG Spiegel Gundam (Shadow Gundam).
thanks for showing the difference with 2 almonds! the gap between 1 and 2 almonds is astronomical
I concur with the construction of the legs, they tend to take the longest time when building an MG. Took me a good 3-4 hrs to get my Hi-Nu Ver.Ka's legs up.
Reimagining is a good way to put the Psycoframe yes, considering the original Nu Gundam only ever had its psycoframe on the cockpit. The Ver. Ka is literally the only version of the Nu Gundam with psycoframes on the rest of the body.
Full armor part2 pls
I want to compare part1 and part2 so much. Your channel grown a lot I really want to see how much different then and now so much.
Great review Mecha Gai ! I decided to get the HiNu Ver.ka over the Nu Ver.ka and I don't regret it at all, with the HWS it is easily one of my favourite MG
“Black and red with skulls, what’s not to love?” -Gaikotsu some time ago
Straight 4 hours non stop for the sinanju ver. Ka
Hey Mecha Gaikotsu, I was thinking that legendary kits like the Sazabi and Nu Gundam... should need a short introduction just paying respect to the major role they played.
.
.
.
Sorry! When I see or think of these two MS... I can't stop crying, call me a fanatic but man does it hit the heart seeing these two beauties and their respected pilots.
As a matter of fact the Remains of MSN-04 Sazabi are still on axis wandering in space two this day.
The best MS design for me is OO. I like the way it has sleek yet edgy lines, not too bulky. The feet could do some work, but the way the joints move and how its articulated is awesome. Next is the Norn. A black, imposing gundam with fiery orange streaks. Then, Freedom. That its a good all around suit without being excessive like the SF makes it to my list.
Putting all those water slide decals takes me more than a day! But after with that it makes the Nu Gundam more appealing.