(14:00) I love how it left behind a glowing *galaxy* ...how fitting LOL! Maybe try LEDs with fluid, or UV LEDs with neon-dyed water in your next rocket? :D
Hello brother this is Karthik.... I would like to request you to try mixing glow sticks liquid with liquid nitrogen n let's see if it still withstand it's properties...... I just gave a taught...... If possible please try .😀 All the best
I made one of the these a few years ago and am currently working on a bigger version which has three presser chambers. I've been struggling on the release mechanism, but thanks to you I have some new ideas to try.
2 years ago you made a vid on how to make a rocket launcher can you make another but upgraded with a scope and stuff like that and can shoot the bigger bottles
No. The density of the helium is less than that of air, therefore requiring a greater amount of helium. Because of this, the final weights are the same.
It's like a paper cup if you throw a paper cup up the wind will cause it to mess up its trajectory but if you put a nail in the middle it would make it more heavier so the wind can t toss it around
Rather than building a base for it, use a cork with a needle used for inflating balls. Place fins on it so the bottle sits high enough off the ground, fill it a third with water, and inflate until the cork pops out.
I only came here for the stand but I have to say that rocket was hilariously sad. I just did a science project where we had to make our own bottle rocket no stand and launch it at school. It had to go at least 100 feet. Mine went 400. This rocket was sad.
When I was young during the early 1960s, I had a hand held water rocket that flew really well . The rocket was 7 or 8 inches tall and maaybe 1.5 inches in diameter. I used to experament a lot with different amounts of water to see what made the rocket go the highest. LOTS of fun, but I would have been amazed to see this size of unit!!!
I had a nostalgia trip with this build! My cousins and I used to do this all summer but we just used a bike pump and made a few adapters with small plastic funnels from home depot and A LOT of electrical tape! Fill bottle with water, plug the hole with the electrical tape, pump with a bike pump and as pressure builds... BLAST OFF!
Easy adjustment is to heat up the PVC with a birthday candle to make a bulge that the soda bottle will push against to keep the water and pressure in. Our Cub Scout pack uses 2 1/2 cups of water and 70# pressure. We also have a 6 station launching unit that uses an air compressor. The glow stream is awesome!!! Thanks for sharing.
Hey to cancel out the flipping of the bottle meals the bottle heavier at the top than the bottom so the top should be a little bit heavier so it can make the rocket go straight up
Nate, try using carbonated water instead of just tap water. Maybe the CO2 will give the rocket some extra power. Very cool project. Next project, Solar Scorcher vs. Ice Diamond Play Button.
Put a hot liquid in a small jar, then put it in a bigger jar and vacuum the space bewteen to try to make a thermal insulator. Lets see if it keeps hot longer.
Needs a better seal for more pressure. You should figure out what the maximum pressure you can put into one of your bottles, and try to work a seal design around that. The zip tie locking solution is simple but I looks like it may fail over repeated use and at higher pressures, as the zip ties become less elastic with use (the ones being used as springs) and won't hold the device as tightly in place. This may be a fun project for the future, just to modify and mess around with other systems.
a couple of possible improvments that could be made is when your making it hot glue gun bottle necks around the bottom of the bottle so you can load the liquid after it is on the firing mechanisim and you dont have as much spillage due to loading it
If you fill the cone with sand, it will fly higher. My friend and I used to do this stuff, and it definitely makes a huge difference. It turns a thirty feet of flight into a couple hundred feet or more depending on pressure. We used about 60 to 80 psi
What happens to a raw egg when it is dipped into liquid nitrogen? If you take the shell off (without breaking the entire egg, somehow), what would the inside appear like?
I'd love to see you guys mess with some Tesla Coils. And see if you could make Fulgurite with them. I know they don't get anywhere close to the power of lightning, but it would be cool to see an attempt anyway.
Hello guys, instead of using a pump, you could use a co2 extinguisher without the disperser to power up the rocket, 2500 psi bottle rocket it would be very cool
Could you try making something like this, but with a flammable liquid? And somehow make it ignite as it bursts off. I am curious to see if it will be propelled any further.
Does it count if I skip to the end
probbly
i mean its still a view
No
Arent u the dude who was always on YIAY
Taikamuna does it matter
Watch the end?
I skipped straight to the end
Who are you?
Your batman right
Aww man your videos are sick bro!
I did too!
Savage
Batman in his hard tone says " Get a Life Kid "
The glow launch looked incredible!
Yes.
(14:00) I love how it left behind a glowing *galaxy* ...how fitting LOL! Maybe try LEDs with fluid, or UV LEDs with neon-dyed water in your next rocket? :D
We The Animals same
There should be a TKOR Summer Camp lol
I agree
That’d be so fun
For adults please!
I definitely agree
I agree that would be amazing!
Do something for Spooktober next
Like a pumpkin cannon
Hey don't you launch me!
I went to knottsscaryfarm two days ago
MisterPumpkin lol I like you profile pic
MisterPumpkin I mean your
What happens when you microwave dry-ice, liquid nitrogen, liquid oxygen, and any other supercooled substance.
That's a video idea!
Nothing. Microwave is built to work on water.
Just a quick thought. Can you make yourself magnetic?
Hello brother this is Karthik.... I would like to request you to try mixing glow sticks liquid with liquid nitrogen n let's see if it still withstand it's properties...... I just gave a taught...... If possible please try .😀 All the best
Who else DIDNT SKIP?!? ALSO THAT WAS DOPE!
Me
I'm trying not to skip by reading the comments.
Me
Aspiring Cloud Expert same
Husky Studios IM AM NOT GONNA SKIP
You should put a baking soda volcano in a vacuum chamber
Tiniest Dino have you asked this yet?
Yes on the nail polish video
I made one of the these a few years ago and am currently working on a bigger version which has three presser chambers. I've been struggling on the release mechanism, but thanks to you I have some new ideas to try.
Can you please make Greek Fire in your next video cause i never really saw it and im curious if it really burns on water.
Put a pumpkin in the vacuum chamber for Halloween
I was smiling when he launched the one with glow fluid....well done tkor team
You should make this so it can use smoke powder so it looks more like a real rocket
Can you try to put water into a vacuum chamber chamber, then freeze it. I want to know if the ice will be transparent or not
Bringing very well filtered water to a boil two times will result in very clear ice cubes.
the water will boil before all the air is removed from the vacuum chamber
Not necessarily; if the heat can be removed quickly enough, the water will not evaporate, but it may still boil off a little bit.
No it will help a little but not really
Even if it's freezed in a vacuum chamber?
See what happens when you put a pumpkin in a vacuum chamber.
Yes!
The glow fluid pattern is literally a spiral galaxy. LOVE IT
That slurp juice experiment was *sick*.
What happens when you boil fog liquid? Plsease do it!!
Blobb fff where am i
What is fog liquid???? Water??? Liquid Nitrogen???
@@Halo_On_Fire i guess he means the kind for fog machines. It mainly contains water and glycol, i guess.
when you boil fog liquid.... it makes fog. MIND BLOWN
I find your videos very interesting but sadly I can not create your creations due to the place where I live
Me too and I live in Nepal
Me too and I live in India (Kerala)
Ok
Arizona?
I just cant😢😢😢
Ahahahaa that night time shot, love how you can see how much whiter his hands are from wearing those gloves all the time
You should put the 'fins' at a bit of an angle, so that the bottle spins, it should be more stable in the air and fly more verticaly
2 years ago you made a vid on how to make a rocket launcher can you make another but upgraded with a scope and stuff like that and can shoot the bigger bottles
Plus New assistant
TH-cam would just block it
Anyone else just skip to the end??
13:20
Luckenya I did lol
Can you make something for Halloween like scary skeleton dog? As a decoration or make a medal dog or something like that
Zip ties and that collar... ingenious.
Nate is so GRATE at this.
Are you sponsored by zip tie?
bobcat 101 or pvc brand
This video is sponsored by sponsor.
And Duct Tape 🤣
maybe hot glue
bobcat 101 or a soda brand, so People drink soda.
If you fill a bottle with a enough helium will it float?
Lava Lit 2000 No. Not enough space to hold enough pressure to lift it
If you can find a bottle large and light enough.
Then it wouldn't be a bottle... duh...
No. The density of the helium is less than that of air, therefore requiring a greater amount of helium. Because of this, the final weights are the same.
No, and if you put any more helium than then you need to displace the air it will just make it heavier again.
It's like a paper cup if you throw a paper cup up the wind will cause it to mess up its trajectory but if you put a nail in the middle it would make it more heavier so the wind can t toss it around
We did a bottle rocket like this for my physics class 2 years ago. That was fun. My rocket was the best built, and we swear it went nearly 200ft.
Who else love king of random 👑💗!
Isn't that glowstick stuff toxic?
Yes I think
not really. You shouldn't drink it but it's not going to poison the field or anything.
REALLY, NO NEED SO MUCH PVC PIPE. I ALSO DID IT BUT THIS IS SO MUCH DIFFICULT TO MAKE
LOL
That was so cool at 14:37
Rather than building a base for it, use a cork with a needle used for inflating balls. Place fins on it so the bottle sits high enough off the ground, fill it a third with water, and inflate until the cork pops out.
Can you make a cola fountain and Drink it ?
What happened to Black and Gold
You should attach the fins at an angle, such that when the rocket launches it starts to spin, thus increasing stability
0:45 omg i cant..im just so dirty minded😂😂
What happens if you use something other than a bike pump
still the same, just a little stronger
@Jack Handyside that's what I was thinking
"duct tape"
>is using Duck tape
never
ever mistake the two
big nono
Glow fluid bubbles? Bubble maker/blowing bubbles made with glow fluid. Sounds fun and Id def like to see it.
I only came here for the stand but I have to say that rocket was hilariously sad. I just did a science project where we had to make our own bottle rocket no stand and launch it at school. It had to go at least 100 feet. Mine went 400. This rocket was sad.
The end was a blast.. fun to watch
When I was young during the early 1960s, I had a hand held water rocket that flew really well . The rocket was 7 or 8 inches tall and maaybe 1.5 inches in diameter. I used to experament a lot with different amounts of water to see what made the rocket go the highest. LOTS of fun, but I would have been amazed to see this size of unit!!!
*Apollo20!!*
lol,can not go moon
Hey king of random can you try and recreate goku’s kamahamaha using electricity
I had a nostalgia trip with this build! My cousins and I used to do this all summer but we just used a bike pump and made a few adapters with small plastic funnels from home depot and A LOT of electrical tape! Fill bottle with water, plug the hole with the electrical tape, pump with a bike pump and as pressure builds... BLAST OFF!
Try putting Deodorant in to a vacuum chamber!
You guys should try to find how much volume CO2 takes up in soda using the vacuum chamber and see which sodas have the most CO2 in them
Why do you always have things that fit perfectly
Also a side note instead of wrapping tape just heat the PVC with a candle and squish it together to make a budge.
Please build a DIY water recovering system from hand wash, sink and/or shower for storing and re-using it into the toilet!!!
Easy adjustment is to heat up the PVC with a birthday candle to make a bulge that the soda bottle will push against to keep the water and pressure in. Our Cub Scout pack uses 2 1/2 cups of water and 70# pressure. We also have a 6 station launching unit that uses an air compressor. The glow stream is awesome!!! Thanks for sharing.
The swirl pattern looks sort of like a galaxy which is kind of fitting.
Now I want to see a soda bottle rocket filled with liquid Propane, and an ignition source.
Hey to cancel out the flipping of the bottle meals the bottle heavier at the top than the bottom so the top should be a little bit heavier so it can make the rocket go straight up
Instead of locking ziptie mechanism u can build more pressure in the bottle by making someone to hold the bottle and launch it
You should make a hand held glow water rocket shooter.
Made one of these that went over 120 meters, and had a parachute that deployed off of wind resistance.
Nate, try using carbonated water instead of just tap water. Maybe the CO2 will give the rocket some extra power. Very cool project. Next project, Solar Scorcher vs. Ice Diamond Play Button.
You should try long-exposure photography on the rocket with fluorescent water or maybe fill it with a flammable liquid!'
Put a hot liquid in a small jar, then put it in a bigger jar and vacuum the space bewteen to try to make a thermal insulator.
Lets see if it keeps hot longer.
Needs a better seal for more pressure. You should figure out what the maximum pressure you can put into one of your bottles, and try to work a seal design around that. The zip tie locking solution is simple but I looks like it may fail over repeated use and at higher pressures, as the zip ties become less elastic with use (the ones being used as springs) and won't hold the device as tightly in place.
This may be a fun project for the future, just to modify and mess around with other systems.
You should fill it with gallium instead of water
AWESOMEST the end launch coool!!!!!
a couple of possible improvments that could be made is when your making it hot glue gun bottle necks around the bottom of the bottle so you can load the liquid after it is on the firing mechanisim and you dont have as much spillage due to loading it
If you fill the cone with sand, it will fly higher. My friend and I used to do this stuff, and it definitely makes a huge difference. It turns a thirty feet of flight into a couple hundred feet or more depending on pressure. We used about 60 to 80 psi
What happens to a raw egg when it is dipped into liquid nitrogen? If you take the shell off (without breaking the entire egg, somehow), what would the inside appear like?
How about Mentos Coke vs root beer thermite?? This would be an explosive project 😂👍
And we also love you eating everything Nate
You should put liquid protein or butane in the rocket and light it on the launch
at the end. when the bottle was lanuched at night, it looked like... LAVA!
I did this in my tech. Ed class about a week ago. Its really fun
You should try casting something with the super glue and baking soda mixture
you should strap a leaf blower to a skateboard and see how fast it goes
Lol xp the rockets, what about the cake xp loved the glowing ambiance, pretty cool lol
The last shot of rocket made me press the like button 10 tomes
I'd love to see you guys mess with some Tesla Coils. And see if you could make Fulgurite with them. I know they don't get anywhere close to the power of lightning, but it would be cool to see an attempt anyway.
Nate, IS, the jack of all trades.
We used to do this with a bike tire valve through a cork, a little less comprehensive
Hello guys, instead of using a pump, you could use a co2 extinguisher without the disperser to power up the rocket, 2500 psi bottle rocket it would be very cool
That's KEWL! Great school project project to👌
What happens when you mix Moulton metal with orbeez?
1:00 insert lenny face here
Could you try making something like this, but with a flammable liquid? And somehow make it ignite as it bursts off. I am curious to see if it will be propelled any further.
You guys really need a TV Show
Hey Nate try taking that rocket and use sulfur hexa fluorite to pressurize it
Christy's Red Hot PVC Glue! I bet 99% of the viewers don't know what that is.
I should try this love these diys
you guys should make a vacuum former table would be great for casting
i think you should make a bucket of slime and try to mold something with metal
love you!
Introducing... The water bottle rocket flip challenge!!
what happens with oobleck in the mini arc furnace?
With both the gasket and the hydrogen you can actually not use a lock mechanism just use some sort ignition.
That was awesome..... If you put a nozzle to regulate the flow it would've been 300metre easy!
Hey The King Of Random could you make the records but with gummy and see if they still work? And then taste them if they work.