Step 1 INSERT key and TURN the ignition to ON (just shy of starting vehicle without cranking engine). Step 2 PRESS vehicle information button until “PRESS TO RELEARN REMOTE KEY” is displayed. Step 3 PRESS the Set/Reset Button (Button will have a checkmark) until “REMOTE KEY LEARNING ACTIVE” is displayed. Vehicle is now in Programming Mode. Step 4 PRESS and HOLD LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will sound indicating successful programming. Step 5 REPEAT Step 4 to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes. Step 6 To EXIT Pogramming Mode TURN ignition OFF & REMOVE key. Step 7 Test all remotes. Programming is now complete. Step 8 If these programming instructions helped save you time and money please drop a like.
😂 i burst out laughing when pressed the unlock key and nothing happened, then the sweet assistant voice came on 😂 great job guys, keep it up with the pretty ESV
2011 model programming. If anyone is reading with a 2011, in 2011 the self programming feature was removed, visit a locksmith or dealership. I $trongly recommend a locksmith:)
Hey when I bring the right menu on the dash and push the check mark bottom to the program, I don't get the Chime as you hear in this timestamp 1:12 of your clip. So I can't program the original remote that stopped functioning after the car had a dead battery for a long time and now that all is fine, that is a newly placed and well-charged car battery and new remote battery... ANY HELP PLEASE?
thanks for posting. I damaged my #1 fob, and have ordered a new one from GM. I still have my #2 fob. When I program the new #1 will have have to reprogram my existing #2 fob?
There is a Turn Engine On the bottom, on my fob (ESV 2008) and there is an option in the menu to turn this feature on or off. When I leave it on on, I still can't turn the engine on by the remote. Does it work on yours?
@@iLoveMethJanice Hi I guess you have the same model I have a 2011 Cadillac Escalade ESV do you know how to turn off the air suspension ride Sensor Or reset it once you put on a new air suspension pump?
i’m pretty sure that’s something else more complicated, like you might actually have to use a computer for that in order to program a keyless entry key
rhawkins2003 the sorta fob you speak of that has the hidden key within the fob are for models that have push to start the 07-14 Escalades didn’t have that option so there’s no key within them. Long as you have a existing key and working fob you can order a factory surplus fob off amazon for like $70 an a uncut key for $15 an $5 to have the key cut at a dealer programming the key is as easy as putting working key in an turning to on position an then removing that key an putting new cut key in an turning to the on position within 30 seconds an waiting for the beep if it does not beep there’s a chance your ECM has all 4 key settings programed an you’ll have to have a dealership erase all the keys from it an relearn then for you but if ya only ever had the two factory keys an lost one you can do it your self an the fob is as easy as you just seen. Hopefully that answers some of your questions. Most of this stuff is pretty simple as long as you haven’t lost both sets if your starting from scratch you can have a key cut an programed from your vin number but that is when the price starts to get lil excessive,I’ve done this multiple times on many makes an models across GM’s suvs/trucks so I assure you if you have some basic common sense an able to read the driver information center an follow the prompts you will be able to do this your self an not pay a stealership an hour of labor for something you can do in your driveway.
![POLYCAT - ข้อความรูปยิ้ม [Music Video]](http://i.ytimg.com/vi/lBhIgPGCgbI/mqdefault.jpg)
Step 1
INSERT key and TURN the ignition to ON (just shy of starting vehicle without cranking engine).
Step 2
PRESS vehicle information button until “PRESS TO RELEARN REMOTE KEY” is displayed.
Step 3
PRESS the Set/Reset Button (Button will have a checkmark) until “REMOTE KEY LEARNING ACTIVE” is displayed. Vehicle is now in Programming Mode.
Step 4
PRESS and HOLD LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will sound indicating successful programming.
Step 5
REPEAT Step 4 to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.
Step 6
To EXIT Pogramming Mode TURN ignition OFF & REMOVE key.
Step 7
Test all remotes. Programming is now complete.
Step 8
If these programming instructions helped save you time and money please drop a like.
The dealership wanted $70 to program my fob! LOL! Thanks a lot!
Pay your assistant with a big cone of ice cream as you know how much you need em, when in trouble! :) Have fun and thanks sharing.
😂 i burst out laughing when pressed the unlock key and nothing happened, then the sweet assistant voice came on 😂 great job guys, keep it up with the pretty ESV
Thanks..
And to the Little Assistant, Great Job!
Thanks worked like a charm...big thanks from Belgium
2011 model programming. If anyone is reading with a 2011, in 2011 the self programming feature was removed, visit a locksmith or dealership. I $trongly recommend a locksmith:)
Hey thanks man, worked well, thank you little guy
My 2011 escalade doesn't give the option for programming the remote
I just ran into this problem with my 2011 Escalade, did you find a solution?
Worked like a charm bro thx💯
you have the best video on this i have found. thanks Where did you get that FOB and does it work on the EXT?
Try Ebay that's where I got mine👍🏾
The button for liftgate stops working after this. Any ideas why?
Thank you!
I appreciate this! Thank you!!
Thanks for share really helpful video
No problem
Hey when I bring the right menu on the dash and push the check mark bottom to the program, I don't get the Chime as you hear in this timestamp 1:12 of your clip. So I can't program the original remote that stopped functioning after the car had a dead battery for a long time and now that all is fine, that is a newly placed and well-charged car battery and new remote battery...
ANY HELP PLEASE?
thanks for posting. I damaged my #1 fob, and have ordered a new one from GM. I still have my #2 fob. When I program the new #1 will have have to reprogram my existing #2 fob?
Thank You it worked!!
Does it also make the auto start work?
There is a Turn Engine On the bottom, on my fob (ESV 2008) and there is an option in the menu to turn this feature on or off. When I leave it on on, I still can't turn the engine on by the remote. Does it work on yours?
How would you program the key itself?
Do you know how to program a 2011 escalade esv?
I have the same issue . They only have this learn new key feature on 07-09
@@iLoveMethJanice Hi I guess you have the same model I have a 2011 Cadillac Escalade ESV do you know how to turn off the air suspension ride Sensor Or reset it once you put on a new air suspension pump?
What if you lost your key fob, can you do it without the original fob key?
dwayne Moliga I have the same question
Yes
Then you need a reprogram scanner to clear the stores keys and start fresh.
Hi thanks I'm going to try it know
Can I program the key fob if I lost the original one
Yes I just did
How does it work for push button cars? I have a ‘13 ATS..
dirt2595 Good question I’ll research and let you know.
i’m pretty sure that’s something else more complicated, like you might actually have to use a computer for that in order to program a keyless entry key
can you have 3 fobs, and if so how is the programming different?
You can have up to 8 keyfobs and it's the same process.
The kid correct him lol
Did you have to get a key cut ?
Did you get a key cut inside the key fob? Also where did you get your fin from ?
rhawkins2003 the sorta fob you speak of that has the hidden key within the fob are for models that have push to start the 07-14 Escalades didn’t have that option so there’s no key within them. Long as you have a existing key and working fob you can order a factory surplus fob off amazon for like $70 an a uncut key for $15 an $5 to have the key cut at a dealer programming the key is as easy as putting working key in an turning to on position an then removing that key an putting new cut key in an turning to the on position within 30 seconds an waiting for the beep if it does not beep there’s a chance your ECM has all 4 key settings programed an you’ll have to have a dealership erase all the keys from it an relearn then for you but if ya only ever had the two factory keys an lost one you can do it your self an the fob is as easy as you just seen. Hopefully that answers some of your questions. Most of this stuff is pretty simple as long as you haven’t lost both sets if your starting from scratch you can have a key cut an programed from your vin number but that is when the price starts to get lil excessive,I’ve done this multiple times on many makes an models across GM’s suvs/trucks so I assure you if you have some basic common sense an able to read the driver information center an follow the prompts you will be able to do this your self an not pay a stealership an hour of labor for something you can do in your driveway.
Can I do this for a 2013 CTS?
Yes