How To Terminate CAT 7 Network Cables - Easy Guide / Tutorial
ฝัง
- เผยแพร่เมื่อ 8 ธ.ค. 2020
- If you are struggling with crimping / terminating your network cables...
This is the excellent video you are searching for !
I tried to mention the best tricks and tips on how to do it the easiest way.
I did so many cables I tought I could help you people out because in the very start I struggled myself doing this !
Please support my channel and help me make more and better videos !
COLOR CODE IMAGE: i.stack.imgur.com/FoeXV.jpg
Links:
Kit:
www.bol.com/nl/p/netwerk-kabe...
Connectors RJ45 :
www.bol.com/nl/p/vizyon-netwe...
Cable:
www.amazon.co.uk/BIGtec-insta...
CAT 7 has its known pros :
+Least amount of noise or crosstalk available
+Good for smart home technology
+Longer lifespan
+Backwards compatible
+May prepare for future growth
+More bandwidth
------------------------------------------------------------------------------------------------------------------------------------------------------------
Song: Lensko - Circles
Music provided by BreakingCopyright and NoCopyrightSounds: • [No Copyright Music] L...
------------------------------------------------------------------------------------------------------------------------------------------------------------
🎯 We Post All Kind Of Stuff 🎯
🎞️Never Get Bored On Our Channel🎮
Please Only Like The Video If You Think It Was Usefull ❤️
GoodMods Team - เกม
![[TH] VCT Pacific Stage 2 - Playoffs Day 3 // DRX vs GEN | PRX vs TLN](http://i.ytimg.com/vi/CWM1Q-2-o3M/mqdefault.jpg)
Another tip I learned is to not only cut the solid-colored wires longer than the striped wires; but also, cut them all at about a 45-degree angle, so they can go into the separator one wire at a time.
⚠ATTENTION⚠ on 3:49 The mesh shielding should touch the shield connector, pull the orange isolator back and then clamp the connector to the ground shield.
I didn't know this when making this video.
The first time I did this I had no clue how to start, the videos on TH-cam were very outdated so I hope this video is still helpfull.
This video helped me tons! Good comments also about the ground/shielding. Thanks a ton!
Happy it helped you out !
I would ensure a better connection between the shield / ground wire and the connector shield by folding the ground wire and possibly the shield foil back over the jacket and tightening the collar over.
Sorry, I didn't know. I should have added it.
The first time I did this I had no clue how to start, the videos on youtube were very outdated so I hope this video is still helpfull.
When I have time I will add this absolutely
Awesome video, really helped me out 👌
Thank you for manual, first place where process installation cable to adapter is detailed explained.
This is one of the better ones, only the music he could skip 😉
Thanks for your feedback! you don't like the music in the background? I'll try do do my best with future videos.
@@GoodMods Music in the BACKGROUND would be fine. But the music was much louder than your voice, which is what we want to hear. Please take that music out. I finally had to turn off the sound because I couldn't take it anymore. Everything else is good about this video. Thanks.
@@jonkeeling3137 I will do this in future videos ! Im really sorry it came out so loud... I always let some friends watch it before it goes online and they didn't really mentioned this. Thanks for the feedback, I really want to make my videos better !
Good demonstration!
Thanks mate🤩!
Appreciate the time and effort put into this tutorial!
Thanks mate!
Even with this tutorial, Cat 7 cable is difficult to terminate. I install CCTV cameras with POE and trying to get these thick ass wires to settle down in the connector is annoying and really hard to do when you're standing up with the cables above your head. Why do they make it so difficult?
Thanks for this good tutorial ! One question: What about the ground ? Shouldn't be the mesh shielding be twisted to the metal part or something like that ?
Yes, I forgot doing this in the video. the metal clip needs to be clamped on the mesh shielding.
@@GoodMods can I put Rj 12 on cat6 stp or cat7???
@@GoodMods Only from one side of cable, there should be no full connection other there are two grounds connected
@@sheerunThx! had a clue, now understand how to prevent forming ground loop. Always great to read the comments
Thank you
good video!!
Thanks ♥
Wow this video is very good
The video is not perfect but I really appreciate your comment !!
Thx🎉
thank you
i use pass through connectors. i have to strip the wires a bit to get the wires through though. definitely a bit of a challenge compared to cat 5 utp.
Most belgian accent on youtube :D
Sorry 🙈
Nice one
thx mate !
Hello
Do you have to twist the wires?
i cannot even get the 4 white ones through that small block, let alone another 4. that is just sheer impossible
Hi, got the wires through the load bar however unsure which way the wires should go through the load bar, any advice please?
Please look at the color image in the description, did it help?
Hi. Just a clarification from a nubi...I want to use a standard off the shelf ethernet cable and would run it to a wall socket with a female- connector. WHEN needed I can run a shorter temp ethernet cable from the wall socket to the LAN port in the laptop. Now..if one end of the long cable..say CAT7...has the fine wires in the start-connector on one end, arranged as "1,2,3,4,5,6,7,8" and also the same arrangement, exactly, at the end- connector of the cable. My question is if this end-connector is plugged to the wall socket, than any further short ethernet cable connected to this wall socket, would be connected as "8,7,6,5,4,3,2,1" wrongly?? Or how would it work...is female connector in the faceplate on the wall REVERSE the order...i.e the "keystone" type would fix the arrangement of the cable??? Can anyone explain pls. Tks.
cat7 cables will normally work in older ports.
Need to see A termination.
what is the name of this sorting block used in video... i cant find it anywhere
sorting block is included when you buy this type of the connector its part of it
The cores of my CAT7 do not fit inside the helper. What do I do now??!! 😤😭
⚠Ever heared something about grounded shielding ? You dont cut that off.
If you make a tutorial get your facts straight. Cat-7 is all about the shielding!
4:14 If your cable is properly grounded, the 'G' led will flash."
Sorry, I didn't know. I should have added it.
The first time I did this I had no clue how to start, the videos on youtube were very outdated so I hope this video is still helpfull.
When I have time I will add this absolutely
Link in the description??
yes?
2nd I think lol
Something was wrong with my subtitles, I couldn't watch it like that 😂
Great video , are there other uses for cat7 cable besides ip ??
@@a1hamer CAT 7 has its known pros :
+Least amount of noise or crosstalk available
+Good for smart home technology
+Longer lifespan
+Backwards compatible
+May prepare for future growth
+More bandwidth
You make wrong work, missing GND connection for two ends.
Sorry, I didn't know. I should have added it.
The first time I did this I had no clue how to start, the videos on youtube were very outdated so I hope this video is still helpfull...
And you think this is the easy way?
I just messed around myself and couldn't find any good tutorial when I had to do this. So I though making this to help others where I can.
What a mess.. Jesus
all this for les than 1% delay? get real people .
No, I did this because I wanted LAN connection in every room since the WiFi at our place doesn't work optimally and is not stable. They always come up with new regulations for new construction homes, so we wanted to be ahead of the curve.