DJI Avata 2 - Dronarchy Fun Acro (Ripper Review)

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 พ.ย. 2024

ความคิดเห็น • 151

  • @brandon9689
    @brandon9689 6 หลายเดือนก่อน +10

    Awesome flight! These videos with true acro/freestyle are much harder to come by than I expected for the Avata 2.

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +2

      Glad you like them! This one was more friendly, but check the self matty short. It is savage!

  • @TimFilmsCars
    @TimFilmsCars 5 วันที่ผ่านมา +1

    I just took mine out for its first rip (with the FPV controller) after spending about 12 hours between Liftoff and FPV Logic. The sims WORK. I had so much fun, can't wait to do more. Thanks for the video!

    • @dronarchy
      @dronarchy  5 วันที่ผ่านมา +1

      @@TimFilmsCars get trick ideas and keep that throttle higher than expected. You will be ripping hard in no time 👊💯

  • @DadRandom
    @DadRandom 6 หลายเดือนก่อน +9

    Agree totally. Going to second this video. I fly mostly smooth cinematic stuff, but I’ve always believed the AVATA 2 hasn’t any real acro issues. Stick rate adjustments need to accommodate the pilots skill. I’ve increased my max rates in a few areas and EXO has been tweaked as well. Your stuck rates are pretty crispy. 😵‍💫 Great video

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      thanks DR 👊. I left the rates at 940° in case I need to hit full stick and save the drone faster.

    • @myday6074
      @myday6074 หลายเดือนก่อน

      It just can flip when you turn fast, no issues other than that

    • @KainniaK
      @KainniaK 8 วันที่ผ่านมา

      @@myday6074 With 3x3x3 hqprops or the 2.9x2.7x3 prop I have not gotten a single flip yet. Only on stock props.

  • @pandacheng4310
    @pandacheng4310 3 หลายเดือนก่อน +2

    Your videos really prove that it’s the problem of pilot not the drone.

    • @dronarchy
      @dronarchy  27 วันที่ผ่านมา

      @@pandacheng4310 the biggest problem is all these youtube influencers, who want to be drone pilots and post pathetic reivew videos like themselves.

  • @tjust88
    @tjust88 8 วันที่ผ่านมา +1

    I'm new to FPV and struggling with manual mode in the sims (Liftoff and DRL) as well as real life. I have Neo and Avata 2. I can fly OK with Motion Contoller but FPV RC3 not so much. I won't give up, but man this is one of the more difficult learning curves I've ever tackled. Videos like yours do give me hope. Impressive flying.

    • @dronarchy
      @dronarchy  8 วันที่ผ่านมา

      @@tjust88 keep up the good work and discipline. You will be ripping in no time. Stay consistent, it pays off 💯🫶

    • @TimFilmsCars
      @TimFilmsCars 5 วันที่ผ่านมา

      I'm in a similar situation, but I just did my first flight with the FPV controller and it was awesome. Keep trying with Liftoff's tutorials until you can do them fairly well. But also, flying in free mode and sticking with it is equally important! I have about 12 hours now between Liftoff and FPV Logic. It gets easier FAST if you practice.

  • @joeyoutdoors
    @joeyoutdoors 6 หลายเดือนก่อน +3

    Perfect flying, thank you for setting the story straight for everyone to see. I have been flying mine every day after work with no issues. All this BS about underpowered, wobbles blah blah... Its the pilot was epic. Does it fly like my 5 inch basher - NO its not a 5inch basher. When you want to just fly and keep your heart rate down - get some awesome footage, the Avata2 is the go-to.
    Bonus round - your buddy will not need 20 stitches when you run into him on accident:)

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +4

      you are 100000000% correct. Too much BS by BS pilots. Not sure why people watch their content if they know they are influetards 👊🤣

  • @StuFliesAroundCornwall
    @StuFliesAroundCornwall 6 หลายเดือนก่อน +7

    Amazing FPV flight. Love it.
    Just subbed. 👍

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      more fun vids ahead 👊❤️‍🔥

  • @LAGuys.net2706
    @LAGuys.net2706 7 วันที่ผ่านมา +2

    What are the settings you use for the gain and expo?

    • @dronarchy
      @dronarchy  7 วันที่ผ่านมา

      @@LAGuys.net2706 stock ones 👍

  • @Blueskyver
    @Blueskyver 6 หลายเดือนก่อน +2

    Excellent flight. I'm finally getting it next week. My first FPV drone... I'm subbing. Greetings from Montreal, Canada.

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      you're going to have a lot of fun

  • @drones2160
    @drones2160 6 หลายเดือนก่อน +2

    Thank you so much for this video!! Epic shots!

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      Glad you enjoyed it! Showing what can be done. Anyone can fly this drone 👊

  • @mandofpv1043
    @mandofpv1043 6 หลายเดือนก่อน +1

    👏 well said ! The problem is the pilot. Nice flight 🔥🤜🤛

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      Thanks 👍. Always practice and enjoy!

  • @stainjah
    @stainjah 27 วันที่ผ่านมา +1

    When you order the Hq props are the m2 7mm screws included? :)
    Do you feel any difference with those props? I bought them mostly for cosmetic reasons to pair with a sick skin from decagirl😊

    • @dronarchy
      @dronarchy  27 วันที่ผ่านมา +1

      @@stainjah big difference. More control with less pitch. These props need M2 7mm screws, not 10mm or you will pierce the motors.

    • @rel892
      @rel892 26 วันที่ผ่านมา

      Are some props for Avata 2 going to be more comfortable for silent or control?

  • @73FPV
    @73FPV 6 หลายเดือนก่อน +1

    Nice job. Enjoyed the flight and video edit.. I can see the work you put in on it.. good work.

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      showing my passion for this sport and making sure the right information is shared. Time to clean the TH-cam fpv community with real examples.

  • @joseernestohuertaaristizab6062
    @joseernestohuertaaristizab6062 5 หลายเดือนก่อน +2

    Hello how are you? What type of screws did you use to attach the HQProp DT2.9x2 .7x3 propellers to the Avata 2?

    • @dronarchy
      @dronarchy  4 หลายเดือนก่อน +2

      thanks for asking. Had to use shorter ones (Avata v1) because these props are slimmer.

  • @FPVAntonMiguel
    @FPVAntonMiguel 3 หลายเดือนก่อน +1

    Bro u are a insanely good pilot

    • @dronarchy
      @dronarchy  3 หลายเดือนก่อน

      @@FPVAntonMiguel you can be this good, just practice and enjoy FPV 👊😉

  • @BaldmanFPV
    @BaldmanFPV 6 หลายเดือนก่อน +1

    That rubics cube.🔥🔥🔥

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      yes bro. Fun to rip around, But the self matty was better 😅

  • @Hopelesswanderer81
    @Hopelesswanderer81 หลายเดือนก่อน +1

    Been ripping some acro. Capabilities are surprising. @dronarchy just got that 🔥

    • @dronarchy
      @dronarchy  หลายเดือนก่อน

      for acro i recommend to add a bit more to stock rates. You will need faster rolls and flips for that heavy whoop

  • @juanfravg
    @juanfravg 2 หลายเดือนก่อน +1

    can this be done in any way with the motion contorller? This is the exact video I was looking for and you solved all my worries and doubts about my avata2. Your full acro is amazing.

    • @dronarchy
      @dronarchy  2 หลายเดือนก่อน

      @@juanfravg thanks for asking. You need the RC3 controller. I dislike that DJI failed to offer an option with RC3 and not the MotionController only.

    • @juanfravg
      @juanfravg 2 หลายเดือนก่อน

      @@dronarchy it's a hassle. It takes forever to get items in my country and overpriced it's a given. I would have loved to buy an Avata 2 with rc3 as a more expensive option. But whatever, gotta wait till October 10th patiently.
      Anyways, your videos are sick, man. I was feeling down watching videos of this drone not really delivering, but you should be ina DJI sponsored golden cradle for your quality content praising the drone and its real capabilities

  • @muntus
    @muntus หลายเดือนก่อน +1

    are you adding anything apart of propguards? like carbon frame under the avata? or it is not worth it?

    • @dronarchy
      @dronarchy  หลายเดือนก่อน

      @@muntus thanks for asking. I only use the bumper and top plate cover. But you can reinforce it 👊

  • @alvicairscapes
    @alvicairscapes 29 วันที่ผ่านมา +1

    Bro what are your manual settings? can I copy and try it?

    • @dronarchy
      @dronarchy  28 วันที่ผ่านมา +1

      thanks for asking. Watch my video titled DJI AVATA 2 .:. PRO FPV Ripping (Secret Rates + Setup + Upgrades). Is under the Must Watch Avata2 Playlist. Thank me later

  • @UtkuYldzCQ
    @UtkuYldzCQ 5 หลายเดือนก่อน +1

    Couldn’t find for AVATA 2 in HQProp website its for Avata 1 only any one can help which one I should purchase?

    • @dronarchy
      @dronarchy  5 หลายเดือนก่อน

      Search for HQ DT2.9x2.7x3 on MyFPVStore, No links here ;)

  • @ides_media
    @ides_media 6 หลายเดือนก่อน +1

    Wow, that was awesome 😮🔥🔥🔥

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      you become a bird, for real!

  • @FlowchilledFPV
    @FlowchilledFPV 4 หลายเดือนก่อน +1

    I really love all your videos. You are a little bit like my Mentor. My goal is to fly like you. Do you recommend Liftoff or should I use Logic FPV at all? Short answer would be great.
    If you will visit Germany, please let me know about :)

    • @dronarchy
      @dronarchy  5 วันที่ผ่านมา +1

      @@FlowchilledFPV Danke bruder. I truly like FPV Logic. Set gravity +10% and weight +5%.

  • @anthonybustos2204
    @anthonybustos2204 5 หลายเดือนก่อน +1

    is it better t o use the controller like that or can you use the controller like a gaming control where you just use thumbs not index and thumb

    • @dronarchy
      @dronarchy  5 หลายเดือนก่อน

      good question. You cannot fly real freestyle with the Motion Controller, must be this RC3 controller.

  • @loichristopher3806
    @loichristopher3806 6 หลายเดือนก่อน +1

    Awesome flight 👍🏼👏 fast and smooth. Liked and subcribed.

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      Much appreciated! Will continue with saucy Avata2 clips ❤️‍🔥

  • @djilab5051
    @djilab5051 5 หลายเดือนก่อน +1

    What about the screws? The stock ones are long :(

    • @dronarchy
      @dronarchy  4 หลายเดือนก่อน

      true, you must use shorter ones.

  • @227giorgio
    @227giorgio 5 หลายเดือนก่อน +1

    Do u have to keep ur phone connected to goggles or remote ? Mine hovers very rough and have orange warnings on left

    • @dronarchy
      @dronarchy  4 หลายเดือนก่อน

      you can use it both ways. Make sure you are in a good airspace and not restricted.

  • @RohanPL
    @RohanPL 3 หลายเดือนก่อน +1

    Man that's epic!. I have simple question, currently i have DJI mini 3, and bought Lift off on steam, I practice using RC-N1 remote. Do you think that buying DJI FPV remote controller is worth at such early stage?

    • @dronarchy
      @dronarchy  3 หลายเดือนก่อน

      @@RohanPL if you know you will buy the new DJI whoop or Avata 2, then grab one.

  • @이재윤-r8p
    @이재윤-r8p 5 หลายเดือนก่อน +1

    Hi, could u give me the link for the propellers?

    • @dronarchy
      @dronarchy  5 หลายเดือนก่อน

      HQ DT2.9x2.7x3 on MyFPVStore, No links here ;)

  • @pspicer777
    @pspicer777 6 หลายเดือนก่อน +1

    I have one. I figure it must be defective because it can't do that. No way, no how. 😊 Really, first rate flying!!

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +2

      you can reach me here or through IG. Been giving tips to everyone!

  • @bosslady_fpv5515
    @bosslady_fpv5515 4 หลายเดือนก่อน +1

    Love your flow!!! I’m very curious on how this guards do on fight time and the effects on flight characteristics? Also did you print or buy this guards

    • @dronarchy
      @dronarchy  5 วันที่ผ่านมา

      @@bosslady_fpv5515 thanks for aksing. Bought them from OriginalDobo Etsy store. It won't affect your flying and protects your investment 👊😉

  • @photosbyjames_
    @photosbyjames_ 6 หลายเดือนก่อน +1

    would love to see you rip this in a bando one day! awesome flying

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      That would be cool!

  • @vanawaker
    @vanawaker 6 หลายเดือนก่อน +1

    So Smooth!So Satisfying!Nice Fly!👍

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      Thank you! Cheers!

  • @cedricbrancourt9064
    @cedricbrancourt9064 6 หลายเดือนก่อน +1

    Very good video, how did you manage to get a final result like this, I understood that it was the man who was in charge, but very good quality, well it's true you know how to play the controller, you were in manual mode?, Giroflo assembly or other. thanks dude

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      Good question! I had my old avata1 props and decided to take them for a spin. The screws must be shorter for them to fit. It was all an experiment that ended up revamping my love for cinewhoops. Had no intention to go crazy acro, but I was itching to test it.

  • @allenfpv6066
    @allenfpv6066 6 หลายเดือนก่อน +1

    Modificaste PID o alguna otra configuración para volar así?

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      si tio. La expo a 0.2 y volar lo mas cómodo que puedas 🤌

  • @cipri198zero
    @cipri198zero 6 หลายเดือนก่อน +1

    Which sim is best to learn freestyle with the Avata 2? And which drone there is most similar? I have the manual remote and currently I use DRL but have no ideea which drone is most similar for freestyle. Im not even sure DRL is the best for learning Avata.
    Anyway, awesome skills!

    • @dronarchy
      @dronarchy  5 หลายเดือนก่อน +1

      thanks for asking. No sim is perfect but I strongly suggest FPV Logic.

    • @cipri198zero
      @cipri198zero 5 หลายเดือนก่อน

      @@dronarchy thank you! Didn’t heard of it, but I will search for it! Cheers!

  • @FPVAntonMiguel
    @FPVAntonMiguel 2 หลายเดือนก่อน

    Brother !! What Filter is on your avata ?

  • @andrewsergeev23
    @andrewsergeev23 6 หลายเดือนก่อน +1

    What angle drone's camera tilted?

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      think I left it at 30° 👍

    • @andrewsergeev23
      @andrewsergeev23 6 หลายเดือนก่อน

      @@dronarchy oh thank you so much!

  • @FPVAntonMiguel
    @FPVAntonMiguel หลายเดือนก่อน +1

    Can you make a Trick Series ??!?!?!? BEGINNER MEDIUM AND ADVANCED ????? please 😊 ?!?!?! Just.explaining how to do your crazy Sick Tricks ❤ i watch ur videos allot and study them allot !!!! I try your tricks but i crashed a few times BUT IM GETTING BETTER !!!
    But i would LOVE A Serries of tricks
    imma watch them all !!!!!!!!!

    • @dronarchy
      @dronarchy  หลายเดือนก่อน

      great suggestion. Will work on that for the Avata pilots, but I've done many tutorials on Instagram Stories. Should make a new series and tuts for everyone.

  • @ArtZoneInside
    @ArtZoneInside 2 หลายเดือนก่อน +1

    Amazing

    • @dronarchy
      @dronarchy  2 หลายเดือนก่อน

      @@ArtZoneInside pure fun 🔥

  • @JamiesonWilliams-xp7bp
    @JamiesonWilliams-xp7bp 4 หลายเดือนก่อน

    Have the name for the type of screws? Where did you get the short ones to fit the props? Great video.

  • @afullonada
    @afullonada 6 หลายเดือนก่อน +1

    Da juego ese chiquitín cuando está en buenas manos!!! 💪💪💪

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      tremenda herramienta para filmar fpv. Esta diseñado para ser cinewhoop, pero se puede volar full acrobático 👊💯

  • @WarSkyDragon
    @WarSkyDragon 6 หลายเดือนก่อน +1

    Nice protection, that's not a bad idea, where could I get something like that ?

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      thanks for asking. Bought it from @originaldobo Etsy store.

  • @vernelfpv
    @vernelfpv 6 หลายเดือนก่อน +1

    which props do you prefer, the HQProp or Stock?

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      HQ becaue of the lower pitch that gives me more control. That simple 👍

  • @azamitsolutionprovider9398
    @azamitsolutionprovider9398 6 หลายเดือนก่อน +1

    I hope the avata also have skills included in the box for use.. Haha

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      you can press the easy acro button for self powerloops and trippy spins 😎

  • @mykhuzaimi
    @mykhuzaimi 6 หลายเดือนก่อน +2

    can you share link protector bump

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      got it from @originaldobo Etsy store. He has a bunch of cool prints! Highly suggested for the real rippers out there.

  • @alfa.pixels
    @alfa.pixels 4 หลายเดือนก่อน +1

    Your flight looks super impressive! Are you still using the HQProp DT2.9X2.7X3 propellers, and how are they performing on your drone? Any issues, or are they fitting well?

    • @dronarchy
      @dronarchy  4 หลายเดือนก่อน

      yes bro. Still using the same props since day 1. Still intact.

    • @ar0nis
      @ar0nis 4 หลายเดือนก่อน

      @@dronarchyyou are using the original screws ? Because I have a little bit space

  • @SeeFPv-qm6ie
    @SeeFPv-qm6ie 6 หลายเดือนก่อน +2

    What kind of props are you using

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      these are HQ DT2.9x2.7x3 which gives more control by having lower pitch 🤫

  • @808-Stat3
    @808-Stat3 6 หลายเดือนก่อน +1

    What a rip. Awesome. I whish I could fly like that. I use the stick lol

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      try to get this RC3. It sucks that DJI wouldn't have a combo with said control.

    • @808-Stat3
      @808-Stat3 6 หลายเดือนก่อน +1

      @dronarchy I ordered it yesterday thru dji. Hate that the controller 2 isn't compatible since I get that already with the avata 1

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      i feel your pain. Had to order everything 1 shot, including ND filters and fly more combo.

  • @itamar4894
    @itamar4894 6 หลายเดือนก่อน +2

    finaly a decent fpv pilot doing acro with the avata 2. how its compared with the avata 3.5?
    and most importantly, did they got rid fromthe yaw tumble of death from the avata 1? TNX

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      good questions. No rolls of death or anything crazy. Keep in mind this is a whoop, not a typical 5" freestyle frame. I like the wider design and better cam with O4. So far is worth it. So yes, you can rip balls and send it. Watch the self matty short I did, you will laugh!

    • @itamar4894
      @itamar4894 6 หลายเดือนก่อน +1

      @@dronarchy ❤️

  • @vernelfpv
    @vernelfpv 6 หลายเดือนก่อน +1

    will try this as well with the HQProp

    • @nickplumridge182
      @nickplumridge182 5 หลายเดือนก่อน

      But they haven’t brought out any for Avata 2??

  • @sandys-channel
    @sandys-channel 6 หลายเดือนก่อน +1

    have you had any tumble issues? I was getting it a fair amount on my Avata 2 but I'm wonder if its just my flying technique as a new pilot. Also, how is the durability for you? I've yet to have a bad crash but seeing your bumpers on the duct guards makes me worried about the overall durability of the plastic frame.

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      thanks for asking. So far it feels great for cinejuice, and can rip decently(not perfect) due to the cinewhoop design. Did slam it on tarmac 3 times and 5 on grass. The Avata2 is still holding it like a champ.

  • @crd1105
    @crd1105 6 หลายเดือนก่อน +2

    Nice flight ! 👍🏿👍🏿👍🏿 did u change ur rates to make it fly better?😊

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      not at all, still ripping 940° but notice i barely hit full stick 👊😎

  • @mn_drone_pilot
    @mn_drone_pilot 6 หลายเดือนก่อน +1

    Which propeller are you using?

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      lower pitch HQ DT2.9x2.7x3 👊

  • @archel_
    @archel_ 6 หลายเดือนก่อน +1

    Is it just me or the throttle control on the Avata 2 feels somewhat "floaty"? I find it slow on descents compared to my other whoops. Nice flying btw!

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      I agree with you. Flies a bit more floaty because of the wider design. You can feel it immediately when doing Split S and other tricks.

  • @mehmetfarukdiler4338
    @mehmetfarukdiler4338 หลายเดือนก่อน

    Please help me install FCC mode
    AVATA2

    • @dronarchy
      @dronarchy  หลายเดือนก่อน

      stick to your country's regulations. Not worth getting into that kind of trouble.

  • @seanmerritt1336
    @seanmerritt1336 6 หลายเดือนก่อน +1

    Those a1 props actually work well?

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      thanks for asking. Yes, use the screws from v1 or you will break the motors. V2 screws are too long for these slammed props.

    • @seanmerritt1336
      @seanmerritt1336 6 หลายเดือนก่อน

      @@dronarchy would the master airscrew avata 1 screws work?

  • @Tadjoe1
    @Tadjoe1 6 หลายเดือนก่อน +1

    I really would like to have a avata 2 setup for Tryp Fpv so i can train manualy !

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      add a bit of drone weight and gravity values to the sim.

  • @jasflyfpv9655
    @jasflyfpv9655 6 หลายเดือนก่อน +1

    Wow! nice flying.. What props did u use? 😁

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      thanks for asking. HQ 2.9x2.7x3 with lower pitch, for more control 👍

    • @jasflyfpv9655
      @jasflyfpv9655 6 หลายเดือนก่อน

      @@dronarchy Thanks..

  • @ruebenfilmz
    @ruebenfilmz 6 หลายเดือนก่อน +1

    Cinejuicy, thatswhatsup!...is that your phrase? I have been having a good time with this quad, rates are quite chill now because of the last few indoor/outdoor gigs. Looking forward to doing a lil rippin...what rates are ya flying here? Thanks mang, always enjoying a Dronarchy slice fo sho!

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      Yes it is! Just enjoying all styles and ripping for the soul 👊💯

  • @MoonRabbitFPV
    @MoonRabbitFPV 6 หลายเดือนก่อน +1

    Hell yeah 😎🤜🏻

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      it's so ironic for me, being an alanog 5" freestyler who actually enjoys ripping this drone. Also very safe around and over people.

  • @wcw3836
    @wcw3836 6 หลายเดือนก่อน +1

    Nice flying. Is the footage stabilized by Gyroflow or straight from Avata 2?

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      thanks for asking. Straight from the O4 stab, no Gyroflow cos is ultrawide.

    • @P100KLE
      @P100KLE 6 หลายเดือนก่อน

      I read gyroflow works when you set it to wide. Nice video subbed. Just got one myself so hopefully get some good footage as I’m normally into just photography

  • @Bruxbart
    @Bruxbart 6 หลายเดือนก่อน +1

    Guter Flug...

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      thanks 👊💯

  • @시커먼선생Mr.Blackman
    @시커먼선생Mr.Blackman 6 หลายเดือนก่อน +2

    nice❤

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      stay tuned for the new acro clip. Will be savage 👊😎

  • @StarrFamilyVideo
    @StarrFamilyVideo 6 หลายเดือนก่อน +1

    Did you jack up your rates a ton? I feel like my avata 2 is flying soooooo sloooooowly it’s like not cool, not fun

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      good observation. Had to crank it up to freestyle rates (940°) and lowered the expo to 0.2.

    • @StarrFamilyVideo
      @StarrFamilyVideo 6 หลายเดือนก่อน +1

      @@dronarchy good to know! I keep cranking higher by like 100 each flight, I just haven’t gone high enough yet!

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      go out and rip. Find that sweet spot for rates and send it 👍

  • @berkvideo
    @berkvideo 6 หลายเดือนก่อน +2

    can you please your values🙏🏼 it flyies soo amooth

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      thanks for asking. Using 940° rates and 0.2 expo.

  • @SeeFPv-qm6ie
    @SeeFPv-qm6ie 6 หลายเดือนก่อน +1

    Nice rip though 😊

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน +1

      I'm an analog 5" ripper, and this cinebird can do Mavic style, Sports Mode and Full Acro.. all in one solution LOL.

  • @seanmerritt1336
    @seanmerritt1336 6 หลายเดือนก่อน +1

    Gotta know what props those are

    • @dronarchy
      @dronarchy  6 หลายเดือนก่อน

      l mentioned on the video description HQ 2.9x2.7x3 👊