Block Paved Driveways PART 3 of 4 KERB EDGINGS AND MANHOLES, aco drains and recessed manhole covers

Part 3
Installing the kerb edgings around the driveway and the first row of blocks around the perimeter. All edging blocks are bedded on concrete to retain the infill blocks. The inspection chambers are modified to take the new lids and the aco threshold drains are installed on concrete along the house to take the water run off. The kerb edgings on this particular project are pointed with grout.
Block is 'Drivesys Basalt'
All images copyright and not to be used without permission
©HowWeLandscape 2021
This is an example of how we installed a driveway to the best of our ability and not a set guideline as we take no liability for the accuracy of information. Do plenty of research and follow all manufacturers guidelines.
We wish you every success in you projects!
#construction #landscaping #transformation #brick #bulding #driveways

[@yoiteangelkira2]

Thank you for showing all the proper steps in this project 💪 it turn out great 🔥

[@HowWeLandscape]

Your welcome, thanks for the feedback. Glad you found it interesting 👍

[@thelostone6981]

Looking forward to part 4!
And whomever is doing the narration; you need to narrate documentaries my friend. You give David Attenborough a run for his money.

[@HowWeLandscape]

Thank you 😀 explaining it all is the the hardest bit ! Thanks for the comment 👍

[@mariak6470]

Beautiful work!

[@littleacornslandscapes2935]

Excellent video and work lads.
As all your videos are.

[@HowWeLandscape]

Cheers mate 👍 👍

[@jCrItCh5]

Top Quality Work Lads...

[@maudeleslie4113]

Beautiful!

[@HowWeLandscape]

Thank you very much

[@davidalexhughes]

Fantastic job and video lads

[@HowWeLandscape]

Thanks for watching, glad you enjoyed it 👍👍

[@adammenczykowski]

Nice work Sam!

[@HowWeLandscape]

Cheers Mench 🍻

[@connorh9423]

Looking forward to part 4, I wish we would get a job laying Premium paving such a marshalls drivesys but the cost of it its staggeringly high especially with the addition sub requirements which they recommend, tegula paving alone is fairly expensive and is out of budget for 90% of our customers, fantastic job lads.

[@HowWeLandscape]

Thanks for the feedback.. It was nice to use a different block for a change. Definitely worth the money if the customer can stretch to it. Hope your jobs go well 👍

[@goodcat1982]

Great channel mate. I used to be a landscaper and it's good to see so much attention to detail. Your work is spot on. Your channel will grow nicely. Good luck

[@HowWeLandscape]

Thanks very much! A lot of people watching these are retired tradesman who like to see work and keep up with modern methods. We stopped building gardens when we recently hit our 40's. Its why I filmed the last few years. Will be more craft and horticultural content soon. Thanks for the feedback 👍🏻👍🏻

[@gavinparry5426]

Superb looking drive.

[@HowWeLandscape]

Thanks for taking interest 👍

[@seanmcgrath9167]

proper job lads

[@HowWeLandscape]

Cheers, thanks 👍🏻

[@johniban]

Best drive way I've seen!
What blocks did you use ?

[@HowWeLandscape]

Thanks very much - they are called 'Drivesys Riven Basalt' by Marshalls

[@rubinamaya4268]

very good work i like it (what is the side of those block i like they look nice!!

[@HowWeLandscape]

Thanks very much, they're called 'Drivesys' by Marshalls. You can find all the details on their website

[@johnwealthy6044]

Very nice work!! I want to try the semi dry mix with the 50/50 ballast. Can blocks be laid on 20mm compacted limestone rather than compacted MOT sub base? Not sure if anyone has ever done this byt my old paving slabs (38mm thick) were bedded on this base fo r30 years with no probs.

[@HowWeLandscape]

Thanks glad you like it 👍🏻 I cant advise it, but permeable block driveways are laid on a similar course aggregate so it allows water to drain through the blocks. They use a fine stone crush to lay on or add a non woven geo membrane over the aggregate to stop the bedding layer washing into the sub-base

[@Dan4052]

Good video and very helpful. However, I have a question for something a little more challenging. I am doing the same thing, but with the driveway, and I can't use your radius stick because there's a large tree in the way. What's the trick to making a large radius that joins two lines that meet at a 90° angle with a tree that is in the way?

[@HowWeLandscape]

Great Question! You need to make a template and move it to the area. So nearby spray out your curve 1:1 (full size). If small you can cut the curve out of ply. If larger use a long strip of wood or plastic (what ever you can get thats long and flexible) then bend it round the cure. Fix it with a few diagonal battens (like the string holding the curve in a bow and arrow) then move it over and peg it at the right hight to run your blocks round.

[@danmccartney7758]

Thank you!

[@zulfqarali905]

Well done you keep it up you are doing a great job and having fun making some brilliant videos superstar Ali Walsall west midlands england junction 10 m6 Walsall churckery

[@HowWeLandscape]

Thanks for watching and glad you like it. Making videos is great fun, makes work more interesting!

[@mohghtil1705]

I am building du experience. Is it possible to work with you?

[@Drexxy89]

What the hell is with the concrete :-). Placed on about 1 inch of concrete? And about 2 inches from each side? This is surely fast but not durable.