@@FishinNStuff tip I use and your free to pinch is to paint the last few inches of the tip of my rod with glow in the dark craft paint. Cost me three bucks and I'll get 80 to 100 rod tips painted out if the little bottle. I shine my torch on it for a minute or so and it glows for five minutes then I recharge it
On your trailer guides, you could mount a couple of solar powered walkway lights or some LEDs to the top of the poles for night time loading. Make it easier to see your trailer.
I have started a"Fish N Stuff" saving account in that if I want to buy something for fishing andI have seen you making it, I take the difference, put it in a coffee can, treating myself with something you don't make. Keep up the good work. Love the ideas
My son is a plumber so these videos are so fun fir me. I dont gotta use these hacks fir fish n stuf. They wirk fir other stuff too. But mostly they just awesome.
I absolutely enjoy the hacks and You definitely keep it interesting,I have used several of your hacks already!! My husband bought me a old Jon boat,I am having to put some elbow grease into it! So I watch to see what other hacks are going to help, "just keep them coming"🙂
Ok so on the boat trailer guide bars. Mayby try putting a cool reflective tape on the trailer itself ti protect your paint. It will aslo work as a reflector. Maybe use a clear plastic paint protectir sheet where you put the magnets.
Brother you are nothing short of a Genius Awesome 👌 Video And LOL I see Mr Lure didn't stay in the tackle box jail very long sneaky burger 😄 Hilarious as always 😆 TAKE CARE BROTHER AND Keep 'em coming.
On the black pvc rod holder at the end. If you cut a slot in the bottom you can adjust the angle of your rod tip to the water. I did similar on my homemade spider rig rod holder. I used 3/4 metal conduit pipe and those. Attached the holders to the base with carriage head bolts and wing nuts.
You are a PVC master!💥🔥 And this one was pretty dang awesome as well!! I was watching #7 thinkin’, “What the heck is he doin?” 🤔 And then, 😃 it’s a rod holder?!? 👊 Very nice! Very nice, indeed. 🤙
For hack #1 - instead of a catfish rig, it can, with enough weight, be used as a stand up marker. Putting the glow in the dark tubes or strips (from $1.25 Tree) and/or reflector tape, this will hold up a visible mark about 2 fts up and much easier to see of hack #2, but you can also use reflective tape of the glow in the dark stuff. Very handy if fishing dawn or dusk
Love the hacks. On #1 i cut my noodle around a foot long and stick it on the opposite side of the eye bolt. Add a 2” piece of 1/2” rebar inside the pvc. Makes the noodle stand up when you get a bite. Helps set the hook when it hits the nut on the eye bolt.
always love watching your videos and the talking rattle trap lure, that is so cool, you are great inspiration to other content creators , keep up the awesome hacks, we love them!!!
I would watch your videos even if I weren't into fishing and DIY hacks just for the entertainment factor!! Great hacks!! Great content!! ...even that little rowdy lure is great! 👍🐟 Keep 'em coming!!
That flex seal works I used to seal a fiberglass live well that had hair line cracks in it also liked your locals in video and the hacks also keep them coming
I only have a canoe, but I was thinking, on the guides for the boat trailer, you could put some pool noodles on them too. Not sure if pvc would actually mark up your boat but all these awesome hack get my brain clicking’. Love the hacks man,
I like the fishing pole carrier idea--SO I made some major changes and additions. It has 4 legs instead of 2-- It is 12" tall and 9" wide and has a center carrier pvc rod. Requires 6 tees and 4 elbows. It is freestanding and the bottom of the 2 lower spinning reels are off the floor 1"
Really great channel, seemingly endless entertainment and practical, too. One comment though, for the marker buoy you glued a piece of lead to the pipe to keep it from spinning once the weight hit the bottom. I thought that it would be easier to check out the golf accessories section at the big box store and pick up some lead tape used for making your golf club heavier at the end. Just take a piece the length of the pipe and stick it lengthwise to the pipe, then put your floats on (I just happen to have some lead tape laying around and I do want a couple of marker buoys, great hack, please don't stop thinking this stuff up, they're great!)
I have been racking my brain to figure out how to hang something down the top tail of my pick up bed in my topper without drilling a bunch of holes, the magnets will do exactly what I want, thanks for the tip
I've only seen a few of your hack'n videos. Loved them. Subscribed. You, sir, are a genius. I don't even fish! I live in southern California. I apologize.
Your hack videos are awesome!!! Keep them coming because there are so many thing we can use pool noodles and pvc for. Thanks for all the hacks and your content is awesome!!!!
I like the trolling motor cradle. I made one out of wood so it bolts to my rear seat. I got no way to show you because I got no video action going on. But I like that you made a cradle. You are the man!
As always more great ideas. Now I have to make time to go and build the ones I liked. Like I don't have enough to do everyday already. Lol keep em coming. Thanks
On the trailer hack, you have a lot of weight with the vertical pvc. If you reduced down to 1/4 inch on the vertical piece I think there will be less chance of it coming off.
I've worked at Freightliner making truck parts for 25 years before that I fix mill machines . I started out wood working and still love it . But when I learned to weld it opened up a lot more options . Ol and I have a lot of cop watching me . Yall must all retire and become fishermen lol . Thank you for your service Sir
Love your videos brother. Some good hacks in there. I really like watchin your tips and hacks. Heck I've gone back and watched some from long time back, they were just as good the 2nd time. Keep up the great work. God bless you and your family.
Hi Billy I met you when you was a small child your mama called you Sunny because she knew you was bright you come up with some damn good ideas on this PVC stuff but I’m in boatyard Posey put on your trailer with the magnets why don’t you do a green or an orange pool noodle around it piece of PVC in case it did come off it would float just a thought keep your line wet🎣🎣😂😂
For the magnetic boat guides. You can buy some magnetic led light bar mounts for cars. Super strong neodymium magnets in em. An you can get a pair for about 18 bucks. They have a rubber case over them so they don't scratch! Just a thought or option to think about!
This is pretty neat I really like what you're doing here I remember reading in the Bible how Jesus he went fishing and asked him if they had any meat they was read that in the Bible and by the way you must be born again in order to enter into the kingdom religious people don't get there only Born again people one of the spirit washed in the blood hallelujah bless you all enjoy your fishing I enjoy the hacks thank you brother,
Hey Buddy. Down Rigger Release Clips are expensive, but Amazon has plastic clothes pins that are 12 for $6.00... And if you use the metal ones they are 40 for $8.00. And they both work better than those red ones with weak springs. Probably could work with planer boards also.
Those are some awesome tips on the pvc pipe, love how you do this. Always look forward to seeing your videos. Great work and I'm sure a lot of time put into your making of the videos, I really appreciate the time and effort you put into them, not only showing some great ideas but having a little fun as you do it.
Hmm looking at that rod caddy I'm thinking maybe instead of bolts some pop rivets might be a better option. Maybe use some craft felt to line the interiors to protect the handles just a little bit more.
oh yeah. rod holders coming up great job on your video keep up the good work and with the guide pole for the trailer you could use some battery operated led lights for night time loading for better visibility just sayin
Awesome content man! slam dunkin em! definitely like that last one though. another idea is you could take that rod caddy and stack em in a ladder style and mount em in the boat verticle (probably leaning out just a bit) for when you're not using em. Or mount em on a cab or pole/tow bar to keep out of the way.
Very cool. I like that rod carrier. I have been wanting to make something like that but i haven't pulled the trigger yet. I did make the boat rid holders for my yak.
Another Great video Brother, man the ideas you come up with. Those rod holders you made were the 1st rod holders I made for a boat in the early 90s for crappie fishing and they were Awesome, Great video Mr Stuff , can't wait until the next build.
for the line holder on the catfish float. you could sandwich it between the pool noodle so the bottom lip doesn't break off when transporting in a bucket or the bottom of the boat. Maybe? not a catfisherman but looks like that plastic spool might crack off easy over time. I know how fishing can be hard on equipment.
On a windy day, the waves blew by the wind will push that noodle and keep on spilling that line off so your marker maybe 10 or more feet away from where you dropped it
Keith we all know you are the DIY King and the hacks are truly awesome! Would it be possible to see a fishing trip in an upcoming video? I am curious if Joey is still doing all the work! Lol
I am planning on trying to go with Joey again lol . I went last week but the bite really stinks here . But the temp is supposed to drop 10 degrees next week so it should get better soon
I love the way you present your hacks! You are the man bud!! Keep these coming!!
Thank you
@@FishinNStuff tip I use and your free to pinch is to paint the last few inches of the tip of my rod with glow in the dark craft paint. Cost me three bucks and I'll get 80 to 100 rod tips painted out if the little bottle. I shine my torch on it for a minute or so and it glows for five minutes then I recharge it
You supposed to be saving me money . You going to make me spend it with all these mad scientist inventions I got to have now.
Exactly!!!
🤣😜
On your trailer guides, you could mount a couple of solar powered walkway lights or some LEDs to the top of the poles for night time loading. Make it easier to see your trailer.
Soooo stick around…. Hahaha. Thanks bud. The trailer PVC was awesome indeed.
I have started a"Fish N Stuff" saving account in that if I want to buy something for fishing andI have seen you making it, I take the difference, put it in a coffee can, treating myself with something you don't make. Keep up the good work. Love the ideas
Me too! $3.75
My son is a plumber so these videos are so fun fir me. I dont gotta use these hacks fir fish n stuf. They wirk fir other stuff too. But mostly they just awesome.
I git a new phine and my keyboard dont like me yet. My alphabet is as messed up as the lgbtqrst's
I like that rod holder, awesome!
I absolutely enjoy the hacks and You definitely keep it interesting,I have used several of your hacks already!! My husband bought me a old Jon boat,I am having to put some elbow grease into it! So I watch to see what other hacks are going to help, "just keep them coming"🙂
Yep,,,, PVC pipe is the Lego of grown-up dyi lol,,, Purty Dang Awesome Right There Y'all lol ,,,
I randomly ran across this. BUDDY!!!! the rod holders sold me lol. you sir, you sir............. deserve a handshake.
Thank you , I appreciate that
Awesome hacks Keith. I really like the last rod holder. It could actually be used as a bank rod holder. Keep the hacks coming buddy.
Finally some more PVC hacks I can use up the old stuff I bought for the last ones thank you Keith
Ok so on the boat trailer guide bars. Mayby try putting a cool reflective tape on the trailer itself ti protect your paint. It will aslo work as a reflector. Maybe use a clear plastic paint protectir sheet where you put the magnets.
Brother you are nothing short of a Genius Awesome 👌 Video And LOL I see Mr Lure didn't stay in the tackle box jail very long sneaky burger 😄 Hilarious as always 😆 TAKE CARE BROTHER AND Keep 'em coming.
On the black pvc rod holder at the end. If you cut a slot in the bottom you can adjust the angle of your rod tip to the water. I did similar on my homemade spider rig rod holder. I used 3/4 metal conduit pipe and those. Attached the holders to the base with carriage head bolts and wing nuts.
You are a PVC master!💥🔥 And this one was pretty dang awesome as well!! I was watching #7 thinkin’, “What the heck is he doin?” 🤔 And then, 😃 it’s a rod holder?!? 👊 Very nice! Very nice, indeed. 🤙
Lol thank you Sir
For hack #1 - instead of a catfish rig, it can, with enough weight, be used as a stand up marker. Putting the glow in the dark tubes or strips (from $1.25 Tree) and/or reflector tape, this will hold up a visible mark about 2 fts up and much easier to see of hack #2, but you can also use reflective tape of the glow in the dark stuff. Very handy if fishing dawn or dusk
Thanks true
Love the hacks. On #1 i cut my noodle around a foot long and stick it on the opposite side of the eye bolt. Add a 2” piece of 1/2” rebar inside the pvc. Makes the noodle stand up when you get a bite. Helps set the hook when it hits the nut on the eye bolt.
always love watching your videos and the talking rattle trap lure, that is so cool, you are great inspiration to other content creators , keep up the awesome hacks, we love them!!!
Thank you very much
As alway we enjoy watching your videos. Enjoyed talking to you and thanks for putting my grandson in your video, He was excited to see it.
It was very nice meeting you , Hunter and the rest of your family
Love the noodles! I’ll be building some this weekend!
You could tie a tether line to the magnetic trailer guides to save chasing them down the river.
Thanks for sharing with us. Great ideas.
I would watch your videos even if I weren't into fishing and DIY hacks just for the entertainment factor!! Great hacks!! Great content!! ...even that little rowdy lure is great! 👍🐟 Keep 'em coming!!
I splurged and got the PVC cutter. Thank you for recommending it. It's worth it's weight in catfish.
I agree 100 %
That flex seal works I used to seal a fiberglass live well that had hair line cracks in it also liked your locals in video and the hacks also keep them coming
Absolutely love your videos bud! You upload ‘em… annnd I watch’em
FINAAALLY!!!! “SO STICK AROUND!” I love it! Lol good hacks. I actually use a couple you mentioned. Keep up the good work brother
I did that just for you lol
I only have a canoe, but I was thinking, on the guides for the boat trailer, you could put some pool noodles on them too. Not sure if pvc would actually mark up your boat but all these awesome hack get my brain clicking’. Love the hacks man,
Thank you very much . Your very smart. I saw something like that at the fishing expo . And was thinking about trying it
Great ideas. Each one was awesome. Liked the rod holder at the end the best.
great job Keith, I really like the trolling motor bracket
I like the fishing pole carrier idea--SO I made some major changes and additions. It has 4 legs instead of 2-- It is 12" tall and 9" wide and has a center carrier pvc rod. Requires 6 tees and 4 elbows. It is freestanding and the bottom of the 2 lower spinning reels are off the floor 1"
Really great channel, seemingly endless entertainment and practical, too. One comment though, for the marker buoy you glued a piece of lead to the pipe to keep it from spinning once the weight hit the bottom. I thought that it would be easier to check out the golf accessories section at the big box store and pick up some lead tape used for making your golf club heavier at the end. Just take a piece the length of the pipe and stick it lengthwise to the pipe, then put your floats on (I just happen to have some lead tape laying around and I do want a couple of marker buoys, great hack, please don't stop thinking this stuff up, they're great!)
Great video. Now can you make a PVC rod holder for your truck. Would love to see how to store in the bed
I have been racking my brain to figure out how to hang something down the top tail of my pick up bed in my topper without drilling a bunch of holes, the magnets will do exactly what I want, thanks for the tip
Yeah those magnets are awesome
I used one of those half in wide rings of PVC to remove a clutch from a HD Sportster it worked perfectly 👍
Great video. Keep ‘em going. Because we are waiting.
Brilliant tips!! Gonna' make my boating experience better with these. Tks!
I liked all your pvc hacks, some were straight up brilliant! 👍
Thank you . I'm working in one right now that's really cool
Another amazing video. Love the ideas you come with. Thank you
Yep..them R awesum! Thanks as always buddy! (love the lure jokes!😂) 👍👍👌✌️
I've only seen a few of your hack'n videos. Loved them. Subscribed. You, sir, are a genius. I don't even fish! I live in southern California. I apologize.
Thank you very much I appreciate it Sir
Really like the rod holder at end. Another great vid man!
Your hack videos are awesome!!! Keep them coming because there are so many thing we can use pool noodles and pvc for. Thanks for all the hacks and your content is awesome!!!!
Thank you brother
Dam plumbers, it would be a plumber out here doing pvc hacks over and over again.
Plumbers = 💁♀️
Fitters & Welders = 💪🏼
Lol
@@FishinNStuff 🤣👍🏼🤘🏼
Another awesome video. Love em. Lol.
Trailer guides! Awesome! We need this! 😁
I would say that this video is awesome. !!
Again another great video Kevin very informative I really like PVC hacks they're so handy and versatile.
whoa......the first hack is genius Im glad I thought of it
I like the trolling motor cradle. I made one out of wood so it bolts to my rear seat. I got no way to show you because I got no video action going on. But I like that you made a cradle. You are the man!
Thank you Sir ,
I really like your AWESOME videos
Keep em coming.
Best pvc hack video on TH-cam!!! Thanks for taking my advice from your last video about adding a new pvc jug line hack!!! Love the spool idea !!!
Thank you
Awesome video 👍👍👍👍 reckon if could use pvc for side bunks
As always more great ideas. Now I have to make time to go and build the ones I liked. Like I don't have enough to do everyday already. Lol keep em coming. Thanks
Great video Keith! Can’t wait for more!
I took that rod caddy and added some legs. It keeps the reels off the ground when ya get where yer goin!
Awesome hacks Keith. Can you make more lure hacks? Maybe like a whopper plopper?
That d be awesome
@@FishinNStuff Maybe making lures with glue gun?
th-cam.com/video/pZ-oEuWMszs/w-d-xo.html&ab_channel=BiggieCheeseVEVO
I really liked the rod rod holder I'm going try it for bank fishing thanks again you have got the best hacks
Thank you for watching Roy
Awesome hacks !!! Nice stuff
On the trailer hack, you have a lot of weight with the vertical pvc. If you reduced down to 1/4 inch on the vertical piece I think there will be less chance of it coming off.
I love watching your videos and I bet you are a lot of fun to go fishing with.
Thank you Sir . I hope I'm fun to go fishing with , but I wouldn't ask my wife haha
@@FishinNStuff lol....can I ask what your name is and what you do for a living? I'll understand if you can't answer.
My names Keith , I'm a fabricator pretty much
@@FishinNStuff I knew it. I can see all the tools in n your shop. I'm a retired cop in Florida and I love to woodwork. Thank you Keith
I've worked at Freightliner making truck parts for 25 years before that I fix mill machines . I started out wood working and still love it . But when I learned to weld it opened up a lot more options . Ol and I have a lot of cop watching me . Yall must all retire and become fishermen lol . Thank you for your service Sir
I love these hack videos.
Love your videos brother. Some good hacks in there. I really like watchin your tips and hacks. Heck I've gone back and watched some from long time back, they were just as good the 2nd time.
Keep up the great work.
God bless you and your family.
Lol . It's changed huh . I appreciate all your support
Hi Billy I met you when you was a small child your mama called you Sunny because she knew you was bright you come up with some damn good ideas on this PVC stuff but I’m in boatyard Posey put on your trailer with the magnets why don’t you do a green or an orange pool noodle around it piece of PVC in case it did come off it would float just a thought keep your line wet🎣🎣😂😂
For the magnetic boat guides. You can buy some magnetic led light bar mounts for cars. Super strong neodymium magnets in em. An you can get a pair for about 18 bucks. They have a rubber case over them so they don't scratch! Just a thought or option to think about!
That's a great idea
As always entertaining
Chears
👍👍👍😜🏴🦕🦄😁✌🤞
Some more awesome ideas! Thanks Keith!
This is pretty neat I really like what you're doing here I remember reading in the Bible how Jesus he went fishing and asked him if they had any meat they was read that in the Bible and by the way you must be born again in order to enter into the kingdom religious people don't get there only Born again people one of the spirit washed in the blood hallelujah bless you all enjoy your fishing I enjoy the hacks thank you brother,
I really liked the holder u carry. Honestly I was looking at them on Amazon. But they were pricey. So maybe pvc jack is the way to go
Hey Buddy. Down Rigger Release Clips are expensive, but Amazon has plastic clothes pins that are 12 for $6.00... And if you use the metal ones they are 40 for $8.00. And they both work better than those red ones with weak springs. Probably could work with planer boards also.
That's a good idea
Oh I'll shtick 'round, you and your tricks saved me A LOT of hassle!!
Awesome video man. Love all of them hacks. 👍🏻👊🏼
Thank you buddy
Those are some awesome tips on the pvc pipe, love how you do this. Always look forward to seeing your videos. Great work and I'm sure a lot of time put into your making of the videos, I really appreciate the time and effort you put into them, not only showing some great ideas but having a little fun as you do it.
Thank you Sir . I do put alot of work into them . But you guys watching em makes it all worth it
Man that was pretty dang awesome😮😮👌👌👍👍
All good hacks brother!
Hmm looking at that rod caddy I'm thinking maybe instead of bolts some pop rivets might be a better option. Maybe use some craft felt to line the interiors to protect the handles just a little bit more.
That's a good idea
oh yeah. rod holders coming up great job on your video keep up the good work and with the guide pole for the trailer you could use some battery operated led lights for night time loading for better visibility just sayin
Always great stuff
AWESOME
That awesome 👌
Great stuff Keith!!! You're PVC game is 🔥
Awesome!
What do you know about Lake Marion and Lake Moultrie?
Amazing! Hugs from Brasil!
HALF THE FUN of these is stopping the video and guessing ahead whatcher makin......well done!!!!
Lol
Awesome content man! slam dunkin em! definitely like that last one though.
another idea is you could take that rod caddy and stack em in a ladder style and mount em in the boat verticle (probably leaning out just a bit) for when you're not using em. Or mount em on a cab or pole/tow bar to keep out of the way.
That is a good idea , thank you Sir
Walmart has telescoping trailer guides with magnet bottoms and yellow foam balls on top. I use them for my trailer.
I didn't know that . But that's cool
@@FishinNStuff they're a life saver. But gotta take them off before you crank the boat up or they will fall off.
@@FishinNStuff Check out Maine Trout Whisperers latest video on his boat mods. He put lights in the PVC ones like you have to see at night.
On the rod holders, spray some traction spray on the inside of the holes to give it grip so rode don't go sliding out. PCS slippery when wet
Very cool. I like that rod carrier. I have been wanting to make something like that but i haven't pulled the trigger yet.
I did make the boat rid holders for my yak.
It's pretty cheap to make compared to the ones you buy
@@FishinNStuff heck yeah. Big time cheaper. 👍🏻👍🏻🎣🎣🎣🎣🎣🎣🐟🐟🐟🐟🐟🦈🦈🦈🦈🦈
thank you i need number 5
On the last back you might use pool noodles bright yellow or other bright color as a kid d of bumper guard and extra floatability
Another Great video Brother, man the ideas you come up with. Those rod holders you made were the 1st rod holders I made for a boat in the early 90s for crappie fishing and they were Awesome, Great video Mr Stuff , can't wait until the next build.
Well you were ahead of your time , or at least ahead of me lol . Thank you Sir
Cool video! And the talking green fish lore needs his own channel! LOL!
Lol he thinks he owns my channel 🤣
Pretty funny .. I’m actually a plumber
Thank you
for the line holder on the catfish float. you could sandwich it between the pool noodle so the bottom lip doesn't break off when transporting in a bucket or the bottom of the boat. Maybe? not a catfisherman but looks like that plastic spool might crack off easy over time. I know how fishing can be hard on equipment.
That's a good idea 💡
U could use ur buoys for noodling too if u make them alittle long and cover fully with the noodle
Noodle(jugging)
On a windy day, the waves blew by the wind will push that noodle and keep on spilling that line off so your marker maybe 10 or more feet away from where you dropped it
I love the pvc vids
Keith we all know you are the DIY King and the hacks are truly awesome! Would it be possible to see a fishing trip in an upcoming video? I am curious if Joey is still doing all the work! Lol
I am planning on trying to go with Joey again lol . I went last week but the bite really stinks here . But the temp is supposed to drop 10 degrees next week so it should get better soon