Great video! It's worth mentioning that if the motor hums and doesn't run, it's worth it to take it out and vacuum and clean it out real well and try it again before buying a new one. Mine hummed and didn't turn and it was because the dust gunked it up. I vacuumed it out and it ran like new.
I took my old motor apart and cleaned and lubricated the moving parts. Ran for about a year or so and is again making noises. The brand fasco is no longer made so may just switch out the motor.
After watching this video, I fixed two of my bathroom fans in less than 10 minutes! One had dust buildup that prevented the fan motor to spin and the other fan had the electrical cord unplugged. Thanks for the video and tips! I was about to replace two units which would have cost me a day and a few hundred bucks!
Thank you for this video, mine is exactly the same as yours and I followed the steps to remove it and clean it all. It was soooooo dirty and yellowish but now it looks brand new again!
I bought a new cover to cover the same yellowed unit. Your video helped me realize that I could unscrew the washer, unplug the light which I don’t even know existed in the 16 years I’ve owned this home, and remove the grille to reveal the slots that the new fan cover springs slip into. I don’t have the functionality of the light but considering I never knew I had one, I won’t miss it; just happy to have the discolored plastic removed from my freshly painted white ceiling. Much appreciated!
Did mine last year... fan was fine but the heater element (never used it anyway) was bad... was surprised parts were still available... fan gets messy being around all that moisture and I just intended to clean it up. Good video for those that think they should replace their fan.
@@LeMatt87n fan blows out and warms the tub and bathroom... like a bigger toaster element... fixture has fan for exhaust, light, and heater, never really used it.
I've taken the larger motors that we have in our fan units apart. They are easy to clean out with condensed air, replaced a worn washer, lubed the bearings with Fluid Film (amazing stuff!) and they are as good as new. Most people do not take the fan units down and clean out the dust, and they should.
This was an excellent video, very clear and concise. It turns out I have the (almost) exact same fan/light. The difference is mine has a compact 2-pin CFL instead of a regular light bulb. Any chance of you doing a video on how to change this fixture from CFL to a bulb standard base?
Your a life saver because 2 of these fans in my house are dead and I was going to hire an electrician to replace them! Because I saw this video I think you have save me a little more than $1200!
You just taught me that you can replace just the motor in your bathroom exhaust fan. I just watched your video, went to the store and bought the part, and replaced the motor. I'm back up and running! I was so worried I'd have a huge mess to pull the whole thing out, and it couldn't have been easier in real life. Thank you for showing me what I was in for, it made it a lot less intimidating.
Amazing and we'll explained video. We have the same bathroom fixture and it is a hot mess!! I am so glad that we can make it look new again without spending alot of money. Thank u so very much.🥰😊
I don’t know if you hear this enough, but thank you so much for your videos, not to sound dramatic, but I never had anyone to teach me these types of skills, from the bottom of my heart, thank you!
We have an old NuTone heat-vent-light from the mid-60s that needs replacing. It used an exposed heating element that would fail by dripping hot metal onto the floor. I don't think I'd want to go back to that. Incandescent heat lamps don't catch your bathmat on fire when they burn out. The vent motor is also dead. The master bath has a similar model that doesn't have a vent because of the window, not that we'd want to open up the window even a crack on cold days. Both heating elements failed by raining down fire. I don't know what they were thinking when they thought that was a good idea.
@@specialopsdave There are other things to consider like natural convection and radiative heat. The heat source doesn't have to be on the floor to indoor natural convection. Ceiling heaters aren't so much convective as they are radiative and forced air. It also uses far less energy to move air than it does to heat it. Radiative can also spread heat more quickly over larger distances especially if there is nothing blocking it. It heats the same way a ceiling light lights up a room.
The last time I had to replace a motor I happened to see a apartment grade complete unit with the same motor for $20 cheaper then just the motor by itself. I bought that used the motor kept the rest for parts I may never use someday. Look around when buying parts. Good video,short to the point and NO MUSIC, thank you.
Excellent video indeed and quite similar to the steps I’ve taken over the years to keep these ceiling fans in operation and avoid them becoming eyesores for the lint, dirt and other nastiness they attract. There is one thing homeowners should check before following your approach and that is to check where the fan’s exhaust vent terminates. In two of my bathrooms, the disappointing answer was through the ceilings into the unfinished attic. While this might be consistent with code, I’ve come to understand you need the exhaust to exit the structure not just the weather perimeter. Finally, a simple rotary timer rather thanks on/off switch likely is going to be useful for most people as these fans should be operated as soon as the shower water is turned on until at least 15 minutes after the water is turned off (subject to adjustment for unusual climates).
My family home needs a replacement one. We have an old style finger chopper fan only model. It works but it's dangerous. I wonder what would be an easy fix. If I can find a gril replacement that would be perfect since the fans are fine.
I like how concise your videos are-that is key to attracting an audience with limited time.My criteria for even watching something always is the length of the video.Of course more complex issues require more time but simple straightforward content suits me and most people best-THANKS
Apparently a hydrpgen peroxide soak is good for a rewhitening yellowed plastics. I've never done tried it myself but have seen restoration videos and they use the yrick
Use a tornador cleaning gun instead of hose. They will make astic parts white again or carpet. Work incredibly well. Only $40 on amazon. Made for detailing vehicles but I use mine for everything. This cleaning tool really addictive to use.
Excellent informative video. I love how you include very clear video showing the important details. I especially love the narration which includes precautionary details, things to be aware of, procedures and approx. costs, etc. Non-verbal videos fall short because they do not address these important details.
That was a great video, can you do a 70's Vintage Nutone HS-93? It is a bathroom Light, Fan and Heater all in one. They were used in all the original Del Web Sun City homes.
Is it simple to add the fan timer button? I know someone in my home that doesn't like to use the fan but might if it turned off automatically. A humidity sensor to turn on the fan would be even better.
My old exhaust fan is no longer made... bought a replacement assembly but it is taller than the old housing....maybe I will swap out the motor only and see if that works.
I appreciate the content and knowledge drop, but at $25 for a replacement motor, I would have completely replaced. You can get a brand new one with half the sones for $45-50.
@@MBolesy Best ones are Panasonic DC fans. You should look up specific model based on your needs. They are pricey (and if you a timer, you will need a new timer that works with DC motor) but IMO a no-brainer investment for decades to come
Good vid… have done this several times over the years to solve source of intermittent loud vibration but unsuccessful. Have removed fan to test and it hums quietly. Have not been able to determine a pattern. Have considered removing entire frame but blown insulation above gives me pause. Would really appreciate any suggestions.
Great video as always. Also if you didn't want to paint the shroud part (because you could find the right paint or something) you could use a hydrogen peroxide solution diluted with water and place the part in a bucket filed with the solution, leave it in the sun for a few hours and the yellowing will go away. Watch any of 8-Bit-Guys computer restoration videos and you will see what I am talking about.
I know all about retrobright, the 8bit guy is the best! I was going to suggest it but for this, its a lot of waiitng and I didn;t want to make peopel buy the hair version of the stuff, just too much work for the fan. Now for an old C64, its ok!
Mine made noise. I took the fan down. Cleaned everything up and sprayed WD-40 thick lubricant in it. Stays quiet for about a year or so until it needs to be done again.
If you need to clean and degrease non-painted parts or painted parts that are going to be repainted you can just soak them in TSP (tri-sodium phosphate), which is sold in the paint department of hardware stores for about $10 per 1 LB box. You can use it all over the house/ garage on non-painted parts and TSP will even degrease and renew the filter and mesh of your kitchen vent hood that nobody ever cleans and just avoids looking under, hardware and all, no scrubbing needed.
I have a ~15 year old Nutone, similar to the one in your video. A mid power model that doesn't clear the air that well. Does anyone know if you can replace one of these motors with a more powerful motor?
4:35 "for less than .50 you have a brand new white grill", where are you finding Krylon fushion all in one paint for less than .50? Good job on video!!
Great video! It's worth mentioning that if the motor hums and doesn't run, it's worth it to take it out and vacuum and clean it out real well and try it again before buying a new one. Mine hummed and didn't turn and it was because the dust gunked it up. I vacuumed it out and it ran like new.
mine is starting to do this, thanks for tip
A short spray of WD40 helps tremendously. It lubricates and wicks mositure.
@@random13627 come back and let me know how it goes.
I took my old motor apart and cleaned and lubricated the moving parts. Ran for about a year or so and is again making noises. The brand fasco is no longer made so may just switch out the motor.
@@spacecowboy3095 wrong actually 3in1 oil is better 3in1 oil is permanent wd40 is temporary
After watching this video, I fixed two of my bathroom fans in less than 10 minutes! One had dust buildup that prevented the fan motor to spin and the other fan had the electrical cord unplugged. Thanks for the video and tips! I was about to replace two units which would have cost me a day and a few hundred bucks!
That's so awesome, I really appreciate the nice feedback and that the video was helpful. Thanks again!
Thank you for this video, mine is exactly the same as yours and I followed the steps to remove it and clean it all. It was soooooo dirty and yellowish but now it looks brand new again!
I bought a new cover to cover the same yellowed unit. Your video helped me realize that I could unscrew the washer, unplug the light which I don’t even know existed in the 16 years I’ve owned this home, and remove the grille to reveal the slots that the new fan cover springs slip into. I don’t have the functionality of the light but considering I never knew I had one, I won’t miss it; just happy to have the discolored plastic removed from my freshly painted white ceiling. Much appreciated!
Did mine last year... fan was fine but the heater element (never used it anyway) was bad... was surprised parts were still available... fan gets messy being around all that moisture and I just intended to clean it up.
Good video for those that think they should replace their fan.
What’s the heating element for?
@@LeMatt87n fan blows out and warms the tub and bathroom... like a bigger toaster element... fixture has fan for exhaust, light, and heater, never really used it.
I've taken the larger motors that we have in our fan units apart. They are easy to clean out with condensed air, replaced a worn washer, lubed the bearings with Fluid Film (amazing stuff!) and they are as good as new. Most people do not take the fan units down and clean out the dust, and they should.
I have the same unit and i use peroxide and oxi clean and soaked it in the sun and it turned the yellow cover back to bright white looked brand new
You saved me a lot of money with this video. Thank you very much and very well done.
This was an excellent video, very clear and concise. It turns out I have the (almost) exact same fan/light. The difference is mine has a compact 2-pin CFL instead of a regular light bulb. Any chance of you doing a video on how to change this fixture from CFL to a bulb standard base?
Excellent information almost anyone can use - another great video! 👍
I really appreciate it, thank you
Your a life saver because 2 of these fans in my house are dead and I was going to hire an electrician to replace them! Because I saw this video I think you have save me a little more than $1200!
THIS WAS THE BEEEST VIDEO!!, I have the same fan, my landlord won’t change anything but now I can and will.👍🏾
You just taught me that you can replace just the motor in your bathroom exhaust fan. I just watched your video, went to the store and bought the part, and replaced the motor. I'm back up and running! I was so worried I'd have a huge mess to pull the whole thing out, and it couldn't have been easier in real life. Thank you for showing me what I was in for, it made it a lot less intimidating.
Amazing and we'll explained video. We have the same bathroom fixture and it is a hot mess!! I am so glad that we can make it look new again without spending alot of money. Thank u so very much.🥰😊
Excellent video. We all can get a benefit from the video and the repair!
Thanks for this video. It’s a good reminder to clean all my fans.
I don’t know if you hear this enough, but thank you so much for your videos, not to sound dramatic, but I never had anyone to teach me these types of skills, from the bottom of my heart, thank you!
That was awesome I have the same fan. I’m totally going to do this! Thanks. I didn’t realize you can get just the replacement motor
My Man SC, you seem to keep yourself real busy at the homestead! Keep up the good work!
We have an old NuTone heat-vent-light from the mid-60s that needs replacing. It used an exposed heating element that would fail by dripping hot metal onto the floor. I don't think I'd want to go back to that. Incandescent heat lamps don't catch your bathmat on fire when they burn out. The vent motor is also dead. The master bath has a similar model that doesn't have a vent because of the window, not that we'd want to open up the window even a crack on cold days. Both heating elements failed by raining down fire. I don't know what they were thinking when they thought that was a good idea.
Heaters on the ceiling sounds very inefficient, since heat rises
@@specialopsdave There are other things to consider like natural convection and radiative heat. The heat source doesn't have to be on the floor to indoor natural convection. Ceiling heaters aren't so much convective as they are radiative and forced air. It also uses far less energy to move air than it does to heat it. Radiative can also spread heat more quickly over larger distances especially if there is nothing blocking it. It heats the same way a ceiling light lights up a room.
@@robertgaines-tulsa I guess, but I prefer baseboard heaters
@@specialopsdave It's a good choice.
This also works great on RV air conditioner covers and any other things similar in a RV
The last time I had to replace a motor I happened to see a apartment grade complete unit with the same motor for $20 cheaper then just the motor by itself. I bought that used the motor kept the rest for parts I may never use someday. Look around when buying parts. Good video,short to the point and NO MUSIC, thank you.
Can you do a review on a ductless bathroom fan :)?
Always informative as usual!
Insider tip: Broan and NuTone are the same company, the shrouds for that one specifically and the light cover too are both made in WI
If their the same company what’s the difference
@@ansonurich2001 the logos
@@dixonbauls5048 oh
Excellent video indeed and quite similar to the steps I’ve taken over the years to keep these ceiling fans in operation
and avoid them becoming eyesores for the lint, dirt and other nastiness they attract.
There is one thing homeowners should check before following your approach and that is to check where the fan’s exhaust vent terminates. In two of my bathrooms, the disappointing answer was through the ceilings into the unfinished attic. While this might be consistent with code, I’ve come to understand you need the exhaust to
exit the structure not just the weather perimeter.
Finally, a simple rotary timer rather thanks on/off switch likely is going to be useful for most people as these fans should be operated as soon as the shower water is turned on until at least 15 minutes after the water is turned off (subject to adjustment for unusual climates).
My family home needs a replacement one. We have an old style finger chopper fan only model. It works but it's dangerous. I wonder what would be an easy fix. If I can find a gril replacement that would be perfect since the fans are fine.
Excellent, this is exactly what I needed. Thx.😊
Another quality video Silver! What don't you do! 😄 Great job!
And great camera work. You make it so easy but the fan was overhead !
I really appreciate that, it was a really tough one to record.
Thank you for the video; it was really helpful in fixing my fan!
I like how concise your videos are-that is key to attracting an audience with limited time.My criteria for even watching something always is the length of the video.Of course more complex issues require more time but simple straightforward content suits me and most people best-THANKS
We have that exact exhaust fan. Thumbs up.
Thank you, I think they sold millions of that model, it's been in every house I have lived in since the 80s.
Excellent job. Great narrative and video. Thanks so much for posting.
Apparently a hydrpgen peroxide soak is good for a rewhitening yellowed plastics. I've never done tried it myself but have seen restoration videos and they use the yrick
Awesome video, Silver. Thanks for sharing your talents and knowledge.
Excellent narration!
You always provide helpful tips👍🏼 Now can we talk about those plastic jets in the tub?! Can we just spray paint those as well?
Great job really well explained, easily understood.
What a brilliant design, so easy to repair
Great timing! That's the exact fan I've got to work on in one of my bathrooms
Great job on your information and video.
Thank you. That’s an awesome video.
Use a tornador cleaning gun instead of hose. They will make astic parts white again or carpet. Work incredibly well. Only $40 on amazon. Made for detailing vehicles but I use mine for everything.
This cleaning tool really addictive to use.
Excellent informative video.
I love how you include very clear video showing the important details.
I especially love the narration which includes precautionary details, things to be aware of, procedures and approx. costs, etc.
Non-verbal videos fall short because they do not address these important details.
That was a great video, can you do a 70's Vintage Nutone HS-93? It is a bathroom Light, Fan and Heater all in one. They were used in all the original Del Web Sun City homes.
Just what I needed ! Thanks !
Question when I replace the bulb in my exhaust fan should a vacuumed the grill if it’s dusty and check the motor to
Man, you've got great videos. Appreciate ya!
Fantastic video!
Thanks for watching please LIKE & SUSBCRIBE - Links in the description & check out my Amazon recommendation page: www.amazon.com/shop/silvercymbal
As a college student living with a fan that sounds like a chainsaw, this was a godsend
This video is awesome! Thank you!!
Best how to do video on TH-cam 🎉
Great video! It helped!
Is it simple to add the fan timer button? I know someone in my home that doesn't like to use the fan but might if it turned off automatically. A humidity sensor to turn on the fan would be even better.
Thanks for the good info! Will you show how to do this on a ceiling fan too?
Off topic but can you tell me where you bought that vacuum hose?
Thank you!
Can you do a video on cleaning hood vent in the kitchen?
Nice vid...! You said use a degreaser such as simple green but did I see you use purple power?
Thank you, yes it was purple power, the stuff is very good, have been trying it out
My old exhaust fan is no longer made... bought a replacement assembly but it is taller than the old housing....maybe I will swap out the motor only and see if that works.
In restoration videos I’ve seen that hydrogen peroxide can take away yellowing on some plastics. Probably easier just to paint it though.
GREAT VIDEO ...THANKS
Glad you enjoyed it. Thank you
Really good video. Thanks!
Excellent diy project! I had a pro enlarge the hole and install an ultra quiet Panasonic squirrel cage DC fan and light.
Those panasonics are really nice if you are going to upgrade.
@@SilverCymbal I enjoy them everyday! We had both bathrooms changed.
Now THiS is great info to know
Thanks for sharing!
Great video thank you.
That type of bulb creates a lot of heat, not to good on fan motor.
The type of grease they use on motor drys out
Most LED’s are pretty low heat
An LED? yah the base may get a little warm to the touch but I think it's going to be ok.
I did mine in an aluminum finish to match the rest of the bathroom, used the rest on the mailbox redo
Excellent Job!
Awesome. Thanks
Awesome video
This is so good 👍.
Another great video!
I appreciate the content and knowledge drop, but at $25 for a replacement motor, I would have completely replaced. You can get a brand new one with half the sones for $45-50.
Thank you. This helped immensely. Problem solved.
Great job.
Thanks! 👍🏻
Where can I buy just the light plastic cover? Do you have the part number for it?
Nice job! 👍
Good, low budget fix. However, I decided to replace my entire fan with a quieter model.
The new ones are so quiet, much higher CFM and brighter light as well.
Which model did you replace it with? Any recommendations?
@@MBolesy
Best ones are Panasonic DC fans. You should look up specific model based on your needs.
They are pricey (and if you a timer, you will need a new timer that works with DC motor) but IMO a no-brainer investment for decades to come
@@MBolesy Panasonic.
Smh.... I love TH-cam!! Thanks a bunch👍.
Was that on inside your shower?
Yes it is, don't judge me by my dirt!
Good vid… have done this several times over the years to solve source of intermittent loud vibration but unsuccessful. Have removed fan to test and it hums quietly. Have not been able to determine a pattern. Have considered removing entire frame but blown insulation above gives me pause. Would really appreciate any suggestions.
Vibrations from the fan?. Maybe the housing case isnt 100% secure. Make sure all screws are tight
A piece of thin cardboard, or folded paper wedged in the housing usually quiets up a vibration noise.
Great video as always. Also if you didn't want to paint the shroud part (because you could find the right paint or something) you could use a hydrogen peroxide solution diluted with water and place the part in a bucket filed with the solution, leave it in the sun for a few hours and the yellowing will go away. Watch any of 8-Bit-Guys computer restoration videos and you will see what I am talking about.
I know all about retrobright, the 8bit guy is the best! I was going to suggest it but for this, its a lot of waiitng and I didn;t want to make peopel buy the hair version of the stuff, just too much work for the fan. Now for an old C64, its ok!
You could also us brighten it by dipping it in hydrogen peroxide and activating the cleaning with a black light set up
Mine made noise. I took the fan down. Cleaned everything up and sprayed WD-40 thick lubricant in it. Stays quiet for about a year or so until it needs to be done again.
If you need to clean and degrease non-painted parts or painted parts that are going to be repainted you can just soak them in TSP (tri-sodium phosphate), which is sold in the paint department of hardware stores for about $10 per 1 LB box. You can use it all over the house/ garage on non-painted parts and TSP will even degrease and renew the filter and mesh of your kitchen vent hood that nobody ever cleans and just avoids looking under, hardware and all, no scrubbing needed.
I have a ~15 year old Nutone, similar to the one in your video. A mid power model that doesn't clear the air that well. Does anyone know if you can replace one of these motors with a more powerful motor?
Do they sell fans that are more quiet. Mine sounds like a jet engine
Awesome, gonna these to my fans because I have those exact fans 😀
When you said wash away all the soap residue all I thought about was poop residue 🤣🤣🤣 that stuff was brown.
Wow!!!!! ❤
👏👏👏great
Mine doesn't have a screw holding in the housing. I don't think this applies to mine even though they are the same brand as the one you did.
What is the purpose of these fans. Just that we don’t have them where I’m from.
Can you send me the link of the motor
I have this same fan and it is blowing air instead of pulling air out. Can anyone offer any advice?
4:35 "for less than .50 you have a brand new white grill", where are you finding Krylon fushion all in one paint for less than .50?
Good job on video!!
Thanks, yes the can of paint is $6 and you could easily do 7 or more grills with it so maybe it was closer to .80 hopefully folks can forgive me
@@SilverCymbal I was just joshing ya 😁👍 nice to see you simplify it so people can have the confidence to do for themselves!
PLEASE put an LED bulb in and get rid of that crappy light lol
Nevermind you did lmao, YAYYYY
I thought it will be retrobrighted 😄
8bit and lgr are the kings of that
@@SilverCymbal yes:) then I realised it is much easier to just paint! Love your videos ;)