THANK YOU. My "carpenter" friend told me I has to get some boards put in the attic to mount this cover to the ceiling, BUT, looking at the design of the cover that didn't make sense. Searched on TH-cam, there your video was! Looks great now! Wow! Was so easy!
Dear heavenly days thank you!!! I tried everything I could to get the light cover off except for the right thing! Thank you for not saying “First take cover off”. Not only did you take it off, you clearly showed how it was fastened. Thank you for saving me the cost of fixing my ceiling, because my next step was hammer-related! My sister found this video, yay!! Thank you!
Thank you ! I am women and i was able to do it myself. My husband thought we needed to get in the attic but that was not the case. The hardest part was trying to hold it while attaching the wires to each other. I took a wire hanger and hung it while i attached the wires. It has been out of order and on the to do list for a while now. Works great! TY
Thanks for the help I was good on everything except for the wiring that really helped me I really appreciate it I didn't have to go into the attic though I had to do everything from below is a little tougher because it was on the 1st floor of a townhouse
Video is still helpful! Our bathroom walls were getting so wet when taking a hot shower; ok I was the only one causing that because I take stupidly long and dangerously hot showers. Anyway! It was smothered in dust, so I took it off (thanks to your video for showing me how), cleaned it, and am hoping that helps. If not, now I know how to replace it!
I think if you can match the exact parts and fan/light assembly, you may not need to go into the attic, if you're just replacing the overhead fixture, bulb, and just plugging in the new fixture, otherwise, you'll be going into the attic and probably replacing all the exhaust stuff too.
thanks so much for posting this, like many of the others, i couldn't figure out how to open this to clean all the accumulated dust out of it-all clean now-yay!
Just used this video to repair my own identical ceiling fan. Fortunately did not have to go into the attic; it was just the part I could reach below the fan (choked with dust; dead bulb). Thanks for the video!
I just moved into an old small home dating from 1927: luckily the overhead shower fan works fine, as does the main bathroom overhead light, amazingly, so I'm not messing with it. Instead I'll install a battery LED overhead shower light on the ceiling, and leave it at that. I also currently don't have access to the attic, it's locked off and a total mess, from what I was told.
no need to go in attic. the plate retaining the fan motor and blades is removable. locate small retaining screw near the plugins for fan and light. if no set screw look for metal retaining tabs that hold much like a cereal box top. replace fan motor and plate. if new plate wont match up just swap out the motor n reinstall.
Part of the reason for the attic was to make sure wiring was in good shape and it was vented properly. Also, mine was easily accessible. Good to know you can still change it out even if you can't get to the box via the attic. Thanks for the input!
Thank you to the @DrShankopotamus and to you Clint. You tips and video helped me out to just swap it from the bathroom side without getting into the attic.
As others have pointed out, not a good idea to vent into the attic. I just had a section of our roof replaced due to mold that had formed and rotted out the wood sheathing. Turns out it was from a vent pipe from a bathroom exhaust fan.
Thank you for showing how the thing opens. I didn’t know the trick, couldn’t get mine open, and stayed in the dark for days too afraid I’d break it trying to pry it open.
I only went as far as to clean the light cover, border, and some of the metal on the light fixture, but thank you for the guide. This 20-something has now cleaned years worth of dust out of our bathroom air vent lol.
I know this is an old video, but you stated that without it vented into the ceiling wouldn’t be really good. I’m wondering do you know if that would cause ghostlines?
This fan works very well. th-cam.com/users/postUgkx7yWIKcrbA9KMHkGSfcgxW2lsjHT6B8Sh I replaced my old fan as our radon levels began to spike. When I remove the old fan water poured out of the fan. Must have entered in through the out spout. Replaced with this unit and levels dropped a bit but still over 4.0.Did some more digging and found that we had a small hole under our waste pipe that was allowing some water and radon in.Patched the hole and the levels dropped almost overnight.I really would recommend the radon sensor. It gives real time readings. Without it we would have never known that we had this issue.
Great info. I didn't say much about radon. We also live in a "radon rich" area. It's definitely wise to periodically check levels. We have had ours checked about every 5-6 years or so. i don't have any experience the continuous monitoring.
I had my bathroom remodeled in December 2021 and the fan/light stopped working!! Is that too soon? The video is a lifesaver because I feel I can do it myself me and my daughter. Oh and the contractor won't return any of my calls. Now I'm curious as to how this thing was wired. Thanks a bunch
It's NEVER a good idea to pump hot, steamy bathroom shower exhaust into an attic only..... Trust me, 55 sheets of plywood and a new roof is a direct consequence of previous owner not installing a $18 roof vent kit, yes $18 kit at Menards was a no brainer after a $7500 roof job and the guys installed it for nothing since they were down to basically no roof.
Thanks for the video- needed help with the wiring. I guess NuTone and Broan use the same designs because the NuTone I'm installing right now is exactly the same as your fan 😅
You're welcome. Thanks for the support. I have installed many of these since this first one. I'm planning a video for install without going into the attic on my next one.
Glad to hear it was helpful. I've received feedback from several viewers who say you can replace the guts and leave the housing in place without going into the attic. Good luck. Thanks for watching.
INCORRECT!!! It IS a big deal to exhaust warm moist air into your attic. It creates white and black mold, and can rot your roof sheathing, no matter the size of the attic.
Thanks for the input. House was built that way 20+ years ago and not a spot of mold in it. Since it was built(and passed inspection) I saw no reason to take the extra time, extra money and extra risk(see my prior post) to fix it...as I have said many times before...code says exhaust to outside, mine wasn’t so I left it that way...and size does matter. Humidity of the bathroom air will have very little effect on the overall humidity of my attic. Thanks for watching.
The way my old one was set up one switch turned the light and the fan both on or off how would this affect replacing the fan? (The light still works the motor on the fan died out)
@@markharmon6942 Bruh used big words like “depress” nah man just say “Pop off the plastic by pushing in on it and it will come off” Like we don’t need them powerful words
You're very welcome. Glad i could help...Don't forget to vent to the outside if your attic isn't HUGE😂...That seems to bother quite a few of my fans...
I have the same brand NuTone. I’m in a 3 flat and we don’t have an attic it’s another apartment. I’m pretty sure we have venting out on the side of the building.
You're supposed to in that case...But I was replacing fans at my beach house and the first floor vans were just vented into the space between the floors??? A lotta work to get them to the outside. Builders don't always vent them properly. Thanks for watching.
Did all 4 'metal tabs' of the fan box go to the INSIDE of the plastic duct adapter??? Or just the two opposite tabs that click into the metal fan slots?
So when you say about turning off the power, do I need to actually flip off the circuit breaker for the bathroom, or is toggling off the light switch on the wall good enough?
@@MarkRambo1 Replacing a light bulb is not what I consider to be "working with electricity," as it is not my intention to take anything apart or disconnect wires etc (which I probably wouldn't try to do), but thanks.
Indeed you can. Leave the outer box in place and install new guts in it. Take the guts out and find the model number, go to HD or Lowes and buy a new example of same model. Remove guts from new one and install them in old one. Throw away new outer box.. it only takes a few minutes and you DON'T have to go into the attic. Apartment complexes do these by the hundreds.
I have that exact same model - you could have just pulled the motor out from below and replaced it... although by going into the attic you discovered other issues. It's never good to exhaust hot steamy air into an unheated attic space. In my case the idiots nailed it to the joist between floors and I have no access to pull it out without destroying a tile floor or a bunch of ceiling drywall. I'm probably going to have to destructively cut it out as I have a wiring issue behind it.
Good luck with that one...You're right about the attack...but my attack is very large/open, and I elected to keep the exhaust there and not run exhaust hose all the way to the outside...too much work...Thanks for watching.
Never exhaust in attic and have a timer switch instead of on off. So that fan keeps running after you leave and turn off in few minutes leaving no moisture in the toilet
Great idea for the fan timer. Don't usually recommend exhausting into the attic, but have tons of room up there and too much trouble to run the exhaust all the way out...Thanks for watching.
I installed the fan/light and the light works but the fan doesn't turn on. Plus there is only one switch for the light Can you tell me hat is wrong with it?
Most people would have to cut the sheet rock to get it out then you would call a good spackle guy to fix it. Or destroy the box with tin snips and a grinder or sawzall. This way would avoid destroying your sheet rock.
I've installed several with cutting the sheet rock...You're right!...My recommendation is to cut carefully and small. You can always cut more but you can't cut less. Thanks for watching.
Holy crap! This guy is talking about wearing a mask 4 years ago. He's a time traveler 🔥. So when you break that nut when trying to replace that fan and light would you call that you just busted your nut?
There was a post from another user who said it could be done without getting in the attic. I guess there might be a way to leave the outer box in place and just change out the fan and light assembly. Since most are secured in the attic from outside the box, I would think you must be in the attic to change out the box. Hope this helps...
Is it ever a good idea to take the exhaust off of the wiring and just use the light… my light and exhaust are off of one switch and I want it to just be the light
"It's ok to exhaust into the attic" he says. Well right there it is apparent you have no idea what you are talking about. It is not ok to vent into an attic--period. If you don't understand that you don't understand condensation and other basics. Plus it is really as easy as it gets when you have full access on a steep pitch roof in the attic. Do that in a 4/12 pitch or less and see how easy those maneuvers are! In many cases you will have to do everything from down in the bathroom opening the sheet rock if necessary. It is also very important to insulate your ducting from the fan to the outside which is another high condensation area.
We have already been over this...😉. Fan was exhausted into the attic (by the builder) for 20+ years without any damage. The attic is huge. Yes, code says to exhaust to the outside, but my house came with that particular fan exhausted into the attic and i decided to leave it there and not go traipsing around the huge attic to lay 20-30 feet of exhaust conduit, cut a hole in the soffit and fall two stories while trying to attach the coding approved duct terminals to the outside...You're point is well taken. But I believe my reasoning is sound. Thanks for watching. And taking the time to help out with fixin' stuff.
@@DrShankopotamus these people that have absolutely nothing to do with your house seem so mad. Thanks for posting the video. Found what i needed to know and it was helpful! Have a great day!
This is such a pain in the you know what. I have a split level house and the attic is super tight and cramped with no decking whatsoever on the joists. Not to mention the fan I need to replace is in a corner with barely any room. I'm to damn old and fat to be doing all that lol
If the fan is working there might be a short in the light circuit. Mine is on two separate switches at the wall as well...make sure there isn't a problem with the wall switch and/or wiring. Good luck.
I'm pretty sure the same people built my house. Everything done path of least resistance. I've been suffering for a couple years now trying to figure this thing out. Unfortunately, I has some drywall issues I suspect from this bad boy.
Definitely can have issues. Some love to knock me for exhausting to the attic...but it's HUGE! I was amazed to find my downstairs fans were exhausted into the floor space between the first and second floor. I was able to get one of them out to an outside wall, but some of the others have no where to go without dismantling the ceiling.
You can go digging around through the box and check the connections for the light...or just replace the fan. One option...When you replace the fan, turn the power back on very carefully with terminal twists on each wire so you don't start a fire. You can use a multi meter to be sure you are getting power to the fan light. If you have power turn the power back off and install your new fan. If you don't have power call an electrician. Another option. Just install the new fan and see if the light works, if it doesn't then there's a problem with the wiring...call an electrician.
I assume you mean from your power/switch supply...This would mean you only have one control for both fan and light. You would need to install second switch or just hook your fan and light to the same switch. Check your install instructions with the unit to be sure you can do it this way. Hope this helps...Thanks for watching.
You can replace them without going into the attic. The hard part can sometimes be getting the old one out. On a few I had to remove the "guts" and use shears to cut the metal box to get at the nails/screws holding it in. I've done several that way. I'll see if I can get a video on the next one I do. Thanks for watching.
Thanks for watching...House was built with van vented into the attic and was that way for 20+ years...No damage...Attic is HUGE (as I show in the video) and bathroom is small. Otherwise, definitely vent to the outside, but the continued controversy has been great fun.
Thanks for the info...That's the word from several other viewers as well. And would avoid my attic time and the whole "vent was in the attic and I left it there" controversy😂😂😂...Thanks for the input and thanks for watching
You saw mine was exhausted right onto the sheet rock. The attic is very large...No mold/moisture yet after 20 years...Was a calculated guess just to get it up off the drywall. If your attic is smaller I would definitely exhaust to outside.
Mine is not exhausted. It’s the original unit since the home was built in 1993. I am in Alabama, could be because we don’t experience frigid cold winters like the North?
Please don't ever vent your warm moist bathroom air into your attic space. Trust me this is coming from someone who had to sell a house that had mold in the attic. We had to spend $5,000 in mold remediation due toa bathroom then that it was unknowingly venting into the attic.
Absolutely correct in most cases. Mine was vented to the HUGE attic for 20+ years without any damage, so I left it that way. Just put a fan in my daughters house and cut through the roof to get it vented outside...Thanks for watching.
I would agree...but mine was exhausted that way into a HUGE attic for over 20 years with no problems...Not sure about the builder, he seems to be a stand up guy. Thanks for watching.
As soon as you said it’s OK to exhaust your bathroom air into your attic, you lost me lol that is so incredibly wrong. That’s how you get mold. It looks like you’ve got some mold growing on your attic ceiling from this video
Actually, not venting your exhaust fan to the exterior of your house is a code violation. It's unfortunate that the good doctor doesn't do a bit more research on basic residential codes before sharing his wisdom with the internet world.
THANK YOU. My "carpenter" friend told me I has to get some boards put in the attic to mount this cover to the ceiling, BUT, looking at the design of the cover that didn't make sense. Searched on TH-cam, there your video was! Looks great now! Wow! Was so easy!
Dear heavenly days thank you!!! I tried everything I could to get the light cover off except for the right thing! Thank you for not saying “First take cover off”. Not only did you take it off, you clearly showed how it was fastened. Thank you for saving me the cost of fixing my ceiling, because my next step was hammer-related! My sister found this video, yay!! Thank you!
Thank you ! I am women and i was able to do it myself. My husband thought we needed to get in the attic but that was not the case. The hardest part was trying to hold it while attaching the wires to each other. I took a wire hanger and hung it while i attached the wires. It has been out of order and on the to do list for a while now. Works great! TY
Good job girlfriend!! 👏
Wife here watching too! Hoping I don’t have to go in the gross attic
I needed the beginning part primarily, but thank you SO MUCH! This video was a huge help.
Thanks for the help I was good on everything except for the wiring that really helped me I really appreciate it I didn't have to go into the attic though I had to do everything from below is a little tougher because it was on the 1st floor of a townhouse
Video is still helpful! Our bathroom walls were getting so wet when taking a hot shower; ok I was the only one causing that because I take stupidly long and dangerously hot showers. Anyway! It was smothered in dust, so I took it off (thanks to your video for showing me how), cleaned it, and am hoping that helps. If not, now I know how to replace it!
I have to clean my Broan ceiling exhaust fan and light tomorrow. Now I know how to get the exterior off to clean it. Thanks for the video!
Thank you so much. I needed to remove my cover and your video showed me how it was attached, so I was able to easily remove it and change the bulb.
Glad I could help. Thanks for watching.
Very helpful! Did not realize that it requires some work in the attic until I watched this video
You're very welcome
I think if you can match the exact parts and fan/light assembly, you may not need to go into the attic, if you're just replacing the overhead fixture, bulb,
and just plugging in the new fixture, otherwise, you'll be going into the attic and probably replacing all the exhaust stuff too.
Thanks! Have the same fan. Couldn't figure out how to clean it. Did everything but take the light out lol.
thanks so much for posting this, like many of the others, i couldn't figure out how to open this to clean all the accumulated dust out of it-all clean now-yay!
Just used this video to repair my own identical ceiling fan. Fortunately did not have to go into the attic; it was just the part I could reach below the fan (choked with dust; dead bulb). Thanks for the video!
You’re very welcome. Thanks so much for watching!
I just moved into an old small home dating from 1927: luckily the overhead shower fan works fine, as does the main bathroom overhead light, amazingly,
so I'm not messing with it. Instead I'll install a battery LED overhead shower light on the ceiling, and leave it at that. I also currently don't have access to the attic,
it's locked off and a total mess, from what I was told.
Thank you so much for showing me how to open this, my fan was sounding like a dying robotic sow. Ill fix the fan later lol
no need to go in attic. the plate retaining the fan motor and blades is removable. locate small retaining screw near the plugins for fan and light. if no set screw look for metal retaining tabs that hold much like a cereal box top. replace fan motor and plate. if new plate wont match up just swap out the motor n reinstall.
Part of the reason for the attic was to make sure wiring was in good shape and it was vented properly. Also, mine was easily accessible. Good to know you can still change it out even if you can't get to the box via the attic. Thanks for the input!
Thank you to the @DrShankopotamus and to you Clint. You tips and video helped me out to just swap it from the bathroom side without getting into the attic.
If there is no attic above, like the first floor, this is the only way.
I was just thinking hmm I don’t have an attic…now what? lol
Thank you!! My new place has this type of fan and I couldn’t figure out how to get into it to clean. Very helpful!
same here shannon. For 3 years now Ive wondered how to fully take apart to clean it.(i have the same model) the dust bunnies are a pain n the ass
Your very welcome. Thanks so much for watching!
Q 0pp p
Instablaster
As others have pointed out, not a good idea to vent into the attic. I just had a section of our roof replaced due to mold that had formed and rotted out the wood sheathing. Turns out it was from a vent pipe from a bathroom exhaust fan.
Agree...but how big is the attic and how close was the exhaust to the wood? Thanks for watching.
Thank you for showing how the thing opens. I didn’t know the trick, couldn’t get mine open, and stayed in the dark for days too afraid I’d break it trying to pry it open.
You're welcome. Thanks for the support.
I have the same fan, thanks for showing the steps to clean it. Please can you share the model number of the replacement that you installed?
I only went as far as to clean the light cover, border, and some of the metal on the light fixture, but thank you for the guide. This 20-something has now cleaned years worth of dust out of our bathroom air vent lol.
Same!
I know this is an old video, but you stated that without it vented into the ceiling wouldn’t be really good. I’m wondering do you know if that would cause ghostlines?
This was very helpful, thanks!
This fan works very well. th-cam.com/users/postUgkx7yWIKcrbA9KMHkGSfcgxW2lsjHT6B8Sh I replaced my old fan as our radon levels began to spike. When I remove the old fan water poured out of the fan. Must have entered in through the out spout. Replaced with this unit and levels dropped a bit but still over 4.0.Did some more digging and found that we had a small hole under our waste pipe that was allowing some water and radon in.Patched the hole and the levels dropped almost overnight.I really would recommend the radon sensor. It gives real time readings. Without it we would have never known that we had this issue.
Great info. I didn't say much about radon. We also live in a "radon rich" area. It's definitely wise to periodically check levels. We have had ours checked about every 5-6 years or so. i don't have any experience the continuous monitoring.
Thanks for the video it was really helpful
I had my bathroom remodeled in December 2021 and the fan/light stopped working!! Is that too soon? The video is a lifesaver because I feel I can do it myself me and my daughter. Oh and the contractor won't return any of my calls. Now I'm curious as to how this thing was wired. Thanks a bunch
Just what I needed, thank you!
It's NEVER a good idea to pump hot, steamy bathroom shower exhaust into an attic only..... Trust me, 55 sheets of plywood and a new roof is a direct consequence of previous owner not installing a $18 roof vent kit, yes $18 kit at Menards was a no brainer after a $7500 roof job and the guys installed it for nothing since they were down to basically no roof.
And it's also a code violation in many places to vent directly into the attic.
@@rigidrebel8781 yup.... That too
Hj
Do you have a video for the same light/fan fixture without attic access
Thanks for the video- needed help with the wiring. I guess NuTone and Broan use the same designs because the NuTone I'm installing right now is exactly the same as your fan 😅
You're welcome. Thanks for the support. I have installed many of these since this first one. I'm planning a video for install without going into the attic on my next one.
Now I know how to take it apart to clean! We have the same kind lol
Great video👍😊
Very clear and helpful. Thank you.
You're very welcome. thanks for the support.
Thanks my light worked!
You're welcome!!
Very helpful. Many thanks
You're very welcome. Thanks for watching.
Hey, how did you get the cover back on underneath that light fixture? It is giving me hell
Man been going in my attic for years guess I should we’re a mask maybe next time I will nice video wish I made the money you did .
How do you get the nightlight to work at night with other light out.
Good job, I have one that sounds like the bearings are gone got to replace asap
Glad to hear it was helpful. I've received feedback from several viewers who say you can replace the guts and leave the housing in place without going into the attic. Good luck. Thanks for watching.
INCORRECT!!! It IS a big deal to exhaust warm moist air into your attic. It creates white and black mold, and can rot your roof sheathing, no matter the size of the attic.
Thanks for the input. House was built that way 20+ years ago and not a spot of mold in it. Since it was built(and passed inspection) I saw no reason to take the extra time, extra money and extra risk(see my prior post) to fix it...as I have said many times before...code says exhaust to outside, mine wasn’t so I left it that way...and size does matter. Humidity of the bathroom air will have very little effect on the overall humidity of my attic. Thanks for watching.
The way my old one was set up one switch turned the light and the fan both on or off how would this affect replacing the fan? (The light still works the motor on the fan died out)
I was hoping you would show how to take the light cover off. I only need to change the light bulb.
Just depress the translucent cover at the base a smidgen. There’s a tab that fits in notch on metal frame
@@joebuckaroo82what?
If you cant do that , put the tools down and pay someone.
@@markharmon6942 Bruh used big words like “depress” nah man just say “Pop off the plastic by pushing in on it and it will come off” Like we don’t need them powerful words
@@jdillust depress was only one word. You used a lot of words.
Do you know model of old one, I have very similar from mid 90s and want to replace just fan.
How did u get the plastic cover off?
Thank you!
You're very welcome. Thanks for watching
Nice job is that the only exhaust fan you have in the house
I have this fan but I am in the basement of a house and the attic is the first floor flooring. Help
Thank you sir
You're very welcome. Glad i could help...Don't forget to vent to the outside if your attic isn't HUGE😂...That seems to bother quite a few of my fans...
I have the same brand NuTone. I’m in a 3 flat and we don’t have an attic it’s another apartment. I’m pretty sure we have venting out on the side of the building.
You're supposed to in that case...But I was replacing fans at my beach house and the first floor vans were just vented into the space between the floors??? A lotta work to get them to the outside. Builders don't always vent them properly. Thanks for watching.
you dont pig tail those?
Did all 4 'metal tabs' of the fan box go to the INSIDE of the plastic duct adapter??? Or just the two opposite tabs that click into the metal fan slots?
What about if you don't have the red wire.??
@@aureliosanjuan2306 Why are you hijacking my question? Post your question as a separate one please.
So when you say about turning off the power, do I need to actually flip off the circuit breaker for the bathroom, or is toggling off the light switch on the wall good enough?
If you need to ask that, you shouldn’t be working with electricity…always turn off the power at the circuit breaker
@@MarkRambo1 Replacing a light bulb is not what I consider to be "working with electricity," as it is not my intention to take anything apart or disconnect wires etc (which I probably wouldn't try to do), but thanks.
Can you pull just the motor without going into the attic ?
Indeed you can. Leave the outer box in place and install new guts in it. Take the guts out and find the model number, go to HD or Lowes and buy a new example of same model. Remove guts from new one and install them in old one. Throw away new outer box.. it only takes a few minutes and you DON'T have to go into the attic. Apartment complexes do these by the hundreds.
I have that exact same model - you could have just pulled the motor out from below and replaced it... although by going into the attic you discovered other issues. It's never good to exhaust hot steamy air into an unheated attic space. In my case the idiots nailed it to the joist between floors and I have no access to pull it out without destroying a tile floor or a bunch of ceiling drywall. I'm probably going to have to destructively cut it out as I have a wiring issue behind it.
Good luck with that one...You're right about the attack...but my attack is very large/open, and I elected to keep the exhaust there and not run exhaust hose all the way to the outside...too much work...Thanks for watching.
Slip a long Sawzall blade between the side of the enclosure that's supported and the beam/sheetrock and cut the nails.
Ugh, I gotta go in the attic tomorrow now. I was hoping I could swap it out without having to go up there. Ugh ugh ugh.
Like ur videos
This was EPIC! That's the comment.
I have that exact fan that was poorly installed and not working well.. I'll be replacing with a bigger fan that doesn't have a light.
What type of cable do you used to do the triple conection?
Probably a 14/2
Mmm, more like a 14/3 if you have a fan and light.
Never exhaust in attic and have a timer switch instead of on off. So that fan keeps running after you leave and turn off in few minutes leaving no moisture in the toilet
Great idea for the fan timer. Don't usually recommend exhausting into the attic, but have tons of room up there and too much trouble to run the exhaust all the way out...Thanks for watching.
How can u get it out of you dont have access to that part of crawlspace??
Get in touch with Ant-Man.
I installed the fan/light and the light works but the fan doesn't turn on. Plus there is only one switch for the light Can you tell me hat is wrong with it?
Theres two white wires on the new fan sounds like you missed one when connecting. Should have a total of 3 white wires together
Most people would have to cut the sheet rock to get it out then you would call a good spackle guy to fix it. Or destroy the box with tin snips and a grinder or sawzall. This way would avoid destroying your sheet rock.
I've installed several with cutting the sheet rock...You're right!...My recommendation is to cut carefully and small. You can always cut more but you can't cut less. Thanks for watching.
Holy crap! This guy is talking about wearing a mask 4 years ago. He's a time traveler 🔥. So when you break that nut when trying to replace that fan and light would you call that you just busted your nut?
Hey is there a way around the attic?
There was a post from another user who said it could be done without getting in the attic. I guess there might be a way to leave the outer box in place and just change out the fan and light assembly. Since most are secured in the attic from outside the box, I would think you must be in the attic to change out the box. Hope this helps...
There should be 3 like tabs on that allow the motor to seperate from the case
Heyy.! I don't have the red wire to Connect to the blue wire... I have just to wire white and black wire to connect.
Same here how did you fix it?
Maybe your new fan/light combo has the light and fan on the same circuit?
@@DrShankopotamus Thanks for responding...! Bliss
Is it ever a good idea to take the exhaust off of the wiring and just use the light… my light and exhaust are off of one switch and I want it to just be the light
As long as you don't have any loose/open wiring, I don't think it would be a problem.
"It's ok to exhaust into the attic" he says. Well right there it is apparent you have no idea what you are talking about. It is not ok to vent into an attic--period. If you don't understand that you don't understand condensation and other basics. Plus it is really as easy as it gets when you have full access on a steep pitch roof in the attic. Do that in a 4/12 pitch or less and see how easy those maneuvers are! In many cases you will have to do everything from down in the bathroom opening the sheet rock if necessary. It is also very important to insulate your ducting from the fan to the outside which is another high condensation area.
We have already been over this...😉. Fan was exhausted into the attic (by the builder) for 20+ years without any damage. The attic is huge. Yes, code says to exhaust to the outside, but my house came with that particular fan exhausted into the attic and i decided to leave it there and not go traipsing around the huge attic to lay 20-30 feet of exhaust conduit, cut a hole in the soffit and fall two stories while trying to attach the coding approved duct terminals to the outside...You're point is well taken. But I believe my reasoning is sound. Thanks for watching. And taking the time to help out with fixin' stuff.
@@DrShankopotamus REALLY BAD DECISION!
@@DrShankopotamus these people that have absolutely nothing to do with your house seem so mad. Thanks for posting the video. Found what i needed to know and it was helpful! Have a great day!
This is such a pain in the you know what. I have a split level house and the attic is super tight and cramped with no decking whatsoever on the joists. Not to mention the fan I need to replace is in a corner with barely any room. I'm to damn old and fat to be doing all that lol
The light on my exhaust and fan doesn't come on and my house is 7 yrs old, should I just replace the entire fan. It's very similar to this one?
If the fan is working there might be a short in the light circuit. Mine is on two separate switches at the wall as well...make sure there isn't a problem with the wall switch and/or wiring. Good luck.
How about blue wire .
Does anybody else hear American Pie in the other room at the beginning ?
👍🏻
I'm pretty sure the same people built my house. Everything done path of least resistance. I've been suffering for a couple years now trying to figure this thing out. Unfortunately, I has some drywall issues I suspect from this bad boy.
Definitely can have issues. Some love to knock me for exhausting to the attic...but it's HUGE! I was amazed to find my downstairs fans were exhausted into the floor space between the first and second floor. I was able to get one of them out to an outside wall, but some of the others have no where to go without dismantling the ceiling.
I have that same fan. My light doesn't work, not a bad bulb.
You can go digging around through the box and check the connections for the light...or just replace the fan. One option...When you replace the fan, turn the power back on very carefully with terminal twists on each wire so you don't start a fire. You can use a multi meter to be sure you are getting power to the fan light. If you have power turn the power back off and install your new fan. If you don't have power call an electrician. Another option. Just install the new fan and see if the light works, if it doesn't then there's a problem with the wiring...call an electrician.
The bulb doesn't fit in with the nut cover? Help!
I don't know what to say...Maybe just don't cover your nuts?...Good luck with that and thanks for watching!
I feel confident after 15:00 minutes. But I could just hold the camera and you could install mine too...just saying! Thanks for the video.
You're welcome. Glad it was helpful. Thanks for watching.
@@DrShankopotamus I can't get the box out of the ceiling!!!!!!!!!!!!! It's in some kind of a crimped railing attached in the attic between the boards
I have the same one it’s so loud
But what if you don't have the red color.??
I assume you mean from your power/switch supply...This would mean you only have one control for both fan and light. You would need to install second switch or just hook your fan and light to the same switch. Check your install instructions with the unit to be sure you can do it this way. Hope this helps...Thanks for watching.
Skipped the reinstallation of the new components.
You didn't show how to get the cover off, the most important part. :(
Sorry...It has little tabs on the sides that will flex in and allow the center light cover to be removed.
Dudette! If you can’t figure that one out, leave it alone! You might get hurt messing’ with electricity stuff.
ah hell. i'm not climbing int he attic...will just stay the way it is.....
I am trying to get a bird out of my ceiling!! Thnx!
Why didn’t you mention that you could easily replaced the motor without having to go in the attic?
What if you can't get in the attic? There's just a small square spot that an adult can't fit through
You can replace them without going into the attic. The hard part can sometimes be getting the old one out. On a few I had to remove the "guts" and use shears to cut the metal box to get at the nails/screws holding it in. I've done several that way. I'll see if I can get a video on the next one I do. Thanks for watching.
Mine is downstairs no attic
These videos do not need your radio playing while you talk!
Bath fan must be vented out the roof or side of building. Otherwise moisture and mold accumulates
Thanks for watching...House was built with van vented into the attic and was that way for 20+ years...No damage...Attic is HUGE (as I show in the video) and bathroom is small. Otherwise, definitely vent to the outside, but the continued controversy has been great fun.
Why would you exhaust moisture into your attic? 🤦♂️
You can replace just the motor, if you’re looking to save a few bucks.
Thanks for the info...That's the word from several other viewers as well. And would avoid my attic time and the whole "vent was in the attic and I left it there" controversy😂😂😂...Thanks for the input and thanks for watching
Its never a good idea to exhaust moisture into a cold attic! # mould
You saw mine was exhausted right onto the sheet rock. The attic is very large...No mold/moisture yet after 20 years...Was a calculated guess just to get it up off the drywall. If your attic is smaller I would definitely exhaust to outside.
Mine is not exhausted. It’s the original unit since the home was built in 1993. I am in Alabama, could be because we don’t experience frigid cold winters like the North?
No way I’m doing this. No attic only crawl space. Time to hire an electrician or handyman
Might be a good call!
Please don't ever vent your warm moist bathroom air into your attic space. Trust me this is coming from someone who had to sell a house that had mold in the attic. We had to spend $5,000 in mold remediation due toa bathroom then that it was unknowingly venting into the attic.
Absolutely correct in most cases. Mine was vented to the HUGE attic for 20+ years without any damage, so I left it that way. Just put a fan in my daughters house and cut through the roof to get it vented outside...Thanks for watching.
This is not correct. You should be able to pull the motor out of the case...
SON OF A BISCUIT!!!!!! This the same exact one I have. The attic????? Noooooooo!!!!!!😰😰😰😰
Yep...In the attic. It stopped in the attic 20+ yrs ago with the original builder...and that's where I left it. Go figure. Thanks for the feedback.😊
NEVER vent your air into your attic. If yours is this way you had a lazy builder!!
I would agree...but mine was exhausted that way into a HUGE attic for over 20 years with no problems...Not sure about the builder, he seems to be a stand up guy. Thanks for watching.
you could have just bought a new motor. plus, that fan was filthy.
Replaced the whole fan. Worked for me...
No Audio
As soon as you said it’s OK to exhaust your bathroom air into your attic, you lost me lol that is so incredibly wrong. That’s how you get mold. It looks like you’ve got some mold growing on your attic ceiling from this video
That’s pretty EZ until I do it at my house . Why do I run into complications every DIY I do at my house? WTF!!
Did have some homebrew handy, hold the pliers just so and wear your best undies? That should do it.
Actually, not venting your exhaust fan to the exterior of your house is a code violation. It's unfortunate that the good doctor doesn't do a bit more research on basic residential codes before sharing his wisdom with the internet world.