Follow along as we show you just how easy it is to install our cold air intake for the 2019-2023 Silverado/Sierra 1500 Part Number : 75-5128 Find more information: sbfilte.rs/75-...
Just installed this S&B on my 2020 AT4 6.2L and it gives the truck more growl and throttle response. Truck has Borla atak cat back and this CAI 🦾🦾🇺🇸🇺🇸🇺🇸 runs fukn awesome 😎
This is the 1 n only TRUE PERFORMANCE air INTAKE system, just the Size of the Filter is ALREADY in the Desile territory. M looking forward getting 4 my 6.2.trali boss.🇺🇸👍
I've had one of these in my 2020 LT Trailboss and I love it. However after about 4 months I started getting DTCs P0171 and P0174 (bank one and two lean) and my dealer insists this intake is the problem. Has anyone else had this issue and found a solution?
Supposedly you're supposed to wait 2 hours before hooking up the battery again. They didn't mention this in this video and same thing happened to me. I'm reinstalling mine today and waiting full two hours according to American Trucks video where they talked about it.
Any clue as to why there is a ppfff sound coming from the new ccv quick connects tube s&b supplies, when shutting off the truck? 2022 Silverado refresh model….was told it would be compatible….
So where's the tune? My 2019 GMC was factory order with a cold air intake. It was installed at the dealership. Tech said, reprogramming the ECM is required to recalibrate the mass air flow sensor to gain it's potential horsepower increase.
I have a 2020 AT4 with a 5.3L and the tube from my throttle body to my filter does NOT line up as easily as she gets it. I had to straight up wrestle it to get it to fit and even then it didn't fit correctly to me. Seemed like the couple at the throttle body was way off center.
Im having an check engine light and its reading code p0171 and p0174 too lean bank 2. checked for leaks and disconnected battery for over 2 hours. HELP
Just ordered mine for my 21 Silverado 6.2L. Do you disable the air filter monitor before or after the first start after install? Don't want to get a check engine light.
Does the factory intake pick-up location stay the same? I flooded my 2019 Trailboss (shallow flood waters) and after i realized the pick-up is very low considering the off-road package of the truck.. Will this intake kit help? Thanks for the "how to" videos! Very Helpful!
I'd also like feedback on wet vs dry. Googled and had some general information posted, but would like to hear it from folks who actually have ran both or had experience over the years. I believe simply, wet cleanable you have to oil yourself and last forever, whereas dry replaceable you don't have that re-oiling maintenance, but do need to replace like every 3rd oil change. I think out all of the CAI's I am seeing I am down to either the standard GM intake/with retune code included ($468 Chevyparts.com with discount code), or Rotofab ($489 Amazon).
Have you tried disconnecting the negative terminal for at least 2 hours as stated in the instructions when first installing the unit. Call it the red light of death on your dashboard because it is going to drive you nuts.
@@TheIncredibleHoosier works for people that don’t want a v8. I have a 5.3 but for reviews the 2.7 still awesome for towing at a lower gas consumption.
@@austinlatour8404 The biggest difference I've seen is in the sound. You definitely can hear it and increased throttle response. I can't say that I feel more power and I will probably never put it on the Dyno.
Just installed this S&B on my 2020 AT4 6.2L and it gives the truck more growl and throttle response. Truck has Borla atak cat back and this CAI 🦾🦾🇺🇸🇺🇸🇺🇸 runs fukn awesome 😎
Just received this for my 2019 GMC 5.3, can’t wait to get it installed! Then the jlt catch can will be next
Just installed this badass CAI .... I couldn't have done it without her ..!!!! .. hahahh thank you!!!!
Would love to see side by side dyno #’s between this and the roto fab
This is the 1 n only TRUE PERFORMANCE air INTAKE system, just the Size of the Filter is ALREADY in the Desile territory. M looking forward getting 4 my 6.2.trali boss.🇺🇸👍
Great video! The 2023 Model is slightly different but still a smooth install.
Yeah just did my 23 today and there was a few things that I was like “wtf this wasn’t in the video!?” 😂
Just ordered one today for my 2020 LT Trailboss 5.3. Looking forward to it... although its backordered. Hopefully it comes quickly.
How’d it go? Just wondering might get it for mine
Likes Pandas and AR-15s. I like this company!
Great video, super easy to follow along.
Damn its like ten thousand steps.
Just put this on my 2021 Silverado Z71 5.3L and it sounds bad ass!
I've had one of these in my 2020 LT Trailboss and I love it. However after about 4 months I started getting DTCs P0171 and P0174 (bank one and two lean) and my dealer insists this intake is the problem.
Has anyone else had this issue and found a solution?
I have the same issue with mine
I just kept running it and the engine light turns off after awhile 🤷♂️
Supposedly you're supposed to wait 2 hours before hooking up the battery again. They didn't mention this in this video and same thing happened to me. I'm reinstalling mine today and waiting full two hours according to American Trucks video where they talked about it.
Would like a better camera angle on the pin by the throttle body. No visual on that.
Thank you
Ca weather is not bad except summer would you recommend that lid be off
Any clue as to why there is a ppfff sound coming from the new ccv quick connects tube s&b supplies, when shutting off the truck? 2022 Silverado refresh model….was told it would be compatible….
So where's the tune? My 2019 GMC was factory order with a cold air intake. It was installed at the dealership. Tech said, reprogramming the ECM is required to recalibrate the mass air flow sensor to gain it's potential horsepower increase.
tune only applies to the factory "performance" CAI ... not req'd or spec'd for aftermarket 3rd party
I have a 2020 AT4 with a 5.3L and the tube from my throttle body to my filter does NOT line up as easily as she gets it. I had to straight up wrestle it to get it to fit and even then it didn't fit correctly to me. Seemed like the couple at the throttle body was way off center.
Can you install the intake and the oil separator together?
Im having an check engine light and its reading code p0171 and p0174 too lean bank 2. checked for leaks and disconnected battery for over 2 hours. HELP
Did you install the mass air flow sensor?
Just ordered mine for my 21 Silverado 6.2L. Do you disable the air filter monitor before or after the first start after install? Don't want to get a check engine light.
after. start the engine then disable.
What tools do you need to change the cold air intake ?
Got a question, I used your video to install my s b cold air intake and after a few days , the truck is saying to check air filter system
Same here
Same
Did you guys deactivate the air filter setting?
I got a question. Why is the sensor so close to throttle body? Thats my only doubt before i buy
Does the factory intake pick-up location stay the same? I flooded my 2019 Trailboss (shallow flood waters) and after i realized the pick-up is very low considering the off-road package of the truck.. Will this intake kit help? Thanks for the "how to" videos! Very Helpful!
Getting a check air system message. Anyone have input?
Yes having the same problem. I did what was said about letting it sit for 2 hours
@@andrepalmer9331 did it fix it?
So the extra air inlets suck air from inside the engine compartment?
Does this fit 2023 sierra 1500 2.7L? Thanks
What would the difference between a the 2 different filters? Pros and cons?
I'd also like feedback on wet vs dry. Googled and had some general information posted, but would like to hear it from folks who actually have ran both or had experience over the years. I believe simply, wet cleanable you have to oil yourself and last forever, whereas dry replaceable you don't have that re-oiling maintenance, but do need to replace like every 3rd oil change. I think out all of the CAI's I am seeing I am down to either the standard GM intake/with retune code included ($468 Chevyparts.com with discount code), or Rotofab ($489 Amazon).
So I installed it in my 5.3 Sierra denali but it won't let me disable my air filter life it just says check air filter system in red, any ideas?
Have you tried disconnecting the negative terminal for at least 2 hours as stated in the instructions when first installing the unit. Call it the red light of death on your dashboard because it is going to drive you nuts.
I'm getting the same issue
Are this carb legal in California
Will this fit the 2021 5.3 model
Yes
I just installed the S & B intake on my 22 5.3l. The check intake alert keeps coming on. Is that normal?
Please read steps 42-46 www.sbfilters.com/75-5128install
I installed CAI but check engine light came on. Any way to get it to turn off?
unplug battery for 2 hours. disable the air filter in the menu inside the vehicle
@4:37 Please note: You are going to drop these grommets. Many times. Make sure kids are not in the room as a lot of cussing will happen in 3....2....
Can I remove the optional plug once it’s installed if I change my mind??
Yes, it wouldn’t be hard to pull with it still installed.
Will there be a kit for the 2.7? The stock air box looks the same.
2.7 is gay
@@TheIncredibleHoosier works for people that don’t want a v8. I have a 5.3 but for reviews the 2.7 still awesome for towing at a lower gas consumption.
Is it lame California Carb compliant?
nope
Why disconnect the negative battery terminal?
Im assuming to put the ecu into a relearn mode to self adjust the maf sensor for the new cai setup
@@lilstates93 is it to prevent a check engine light?
@@seangowan7441 yes, always disconnects the battery when your doing anything like this to your vehicle
Frustration at 5 minutes. Cut!!! Lmao 🤣
question: is it required to re program the computer of the Sierra after installing the air intake ?
No
My check engine light keeps coming on and off randomly
@@ismaelortiz2649 did you disable/uncheck the air filter life monitor? Did you disconnect the battery for 2 hours?
No i disconnect only for the install time about 40 mins
@@ismaelortiz2649 supposed to be 2 hours. Computer needs time to reset. 40 minutes not long enough
You want more throttle response get the pedal commander
Pedal Monster is better product because it gets its own 12v power from the OBD
Why is it I can see this video on days on end lol.... I’m take her my truck so can she me too
Decision decisions decisions...... This or the Roto-Fab 🤷🏽♂️
@S&B Filters ... Thanks you helped me make up my mind.......I'm getting the S&B.
@S&B Filters Well I've installed the CAI.........WOW!!!!!!!!! I am so glad I added this to the truck.
Anthony what difference have you noticed? And what about sound?
@@austinlatour8404 The biggest difference I've seen is in the sound. You definitely can hear it and increased throttle response. I can't say that I feel more power and I will probably never put it on the Dyno.
Anthony is it more throaty now in sound? I usually run in sport mode and would like just a bit better throttle response