I regret all those 30° cuts!wooden christmas tree

Christmas Tree Build
Christmas Project
Woodworking Project
FREE DOWNLOADABLE PLANS:
www.whosthevos...
Today, we're diving into the festive spirit with a project that combines modern aesthetics with the warmth of tradition.
All you need is a piece of scrap 2x4. free plans are in the description.
I have listed two different sizes in the plans, we will be creating the adorable smaller one together in this video. to start, I remove the rounded over sides of my 2x4 on the table saw.
now, set your miter saw to 22.5 degrees. trim off the end so you have your first angle.
then flip your board over, set your miter saw to 45 degrees, and cut your first piece to 6 and a half inches
flip the board over again, reset the miter saw angle to 22.5 degrees and cut the 8 and a half inch side.
if you wanted to go off-plan and create your own sizes, using a 2x4, or, whatever piece of wood, whatever the first side length is, plus the length of this miter is what the other side will be. (this also works on the stars)
flip the board again, the bottom is cut to 3 and a forth inches, still at the 22.5 miters
The bottom base I like to leave square, at 90 degrees. I cut these to 3 inches long.
To assemble, all we need to do is apply a little wood glue, and use a 1-1/2" 18 gauge brad nail to secure the boards
together. You'll want to make sure the nails are near the points, if you sink them into the meat of your board, they wont fire all the way through.
And there you go. quick and easy.
#woodworking
#projectsthatsell
#howto
#Christmastree
#45degreetree
#craftsman
#diy
#makemoneywoodworking

[@WhosTheVoss]

FREE DOWNLOADABLE PLANS for this build!
www.whosthevoss.com/product-page/modern-christmas-tree

[@WoodturningWithJohnMarro]

Winner of the internet! Great pieces as usual!! And yes, I am happy :)

[@WhosTheVoss]

😂😂 Thanks John!

[@jimkownacki3629]

Overhead cam is great! Just like a cooking show. Cooking up great holiday projects.

[@WhosTheVoss]

👨‍🍳🔪🥧 Thanks buddy! :) I hope it helps show the project better when Im explaining things

[@aunt_cami2650]

The nail counter is great!

[@WhosTheVoss]

Thanks :) You'll see it again in the top corner!

[@higgiepop158]

Love the nail counter 🎉

[@WoodturningWithJohnMarro]

@whosthevoss - see, I am not the only one. You created this monster :)

[@WhosTheVoss]

Thanks Higgie :)

[@AZbone]

Short, sweet and to the point. Another great video.

[@WhosTheVoss]

Thanks buddy!! :)

[@larrystone5749]

Great job and project thx for sharing enjoyed it Keep building

[@WhosTheVoss]

Thanks Larry!

[@Raequest]

Wow, you have a nice singing voice! Now I'll go watch the rest of the video lol

[@WhosTheVoss]

🤣🤣 thanks! :) I try to add a singing element to most of my videos(;

[@steelsunpi]

Nice and simple and quick.

[@WhosTheVoss]

Thats my three traits *wink* hahaa

[@anonymousman4006]

It was nice seeing you struggle with joining the boards together. As a newbie, I attribute all these minor errors to my lack of skill, but it seems a lot of the time the wood itself is what's causing me grief.

[@WhosTheVoss]

True that! Sometimes it can get a weeeeee bit frustrating 🤣

[@lolly195963]

AWESOME JOB NICE EXPLANATION OF ALL YOUR WORK. LOVED YOUR SINGING 😂

[@WhosTheVoss]

Thanks buddy! I try to add a music element to every video :)

[@mjennings03]

LOVE IT!!! Thank you, I have watched tons of videos, because this tree just cannot be that difficult, lol. I followed your directions and perfection the first try!!! Thank you!!!!!!!!!!!! I subscribed, don't want to miss anything!!!

[@WhosTheVoss]

Woohoo! I have quite a few Christmas builds on the website :) check them out!!

[@debbayley2161]

Yes! Love the sky camera!

[@WhosTheVoss]

Thanks deb :)

[@fromthepalletshed]

Love the nail counter, I’m always wiping my glue finger under the bench lol. Great simple design

[@WhosTheVoss]

🤣🤣 that's where the extra finger glue belongs ;) lol

[@websterbehrens7837]

Simlewith great explanation and video. Keep it up !

[@WhosTheVoss]

Thanks buddy! :)

[@tompowell1260]

Great video . I like the overhead camera. Thanks

[@WhosTheVoss]

Thanks! I've tried several different angles with multiple cameras and straight down from the top seems to be the way to go :)

[@marilynmoore6752]

Put a frenchs mustard cap on the round bottle of tite bond glue it works better. It doesnt clog and when opened it will lock open

[@WhosTheVoss]

Whoa whoa, are they the same size? Imma check this out ;)

[@higgiepop158]

Sky camera is great 👍

[@WhosTheVoss]

Thanks! I've tried several different angles with multiple cameras and straight down from the top seems to be the way to go :)

[@junea3259]

Love the overhead camera

[@WhosTheVoss]

Thanks! I've tried several different angles with multiple cameras and straight down from the top seems to be the way to go :)

[@mrmyblessednest1722]

Nail count👍🏻sky can👍🏻👍🏻 cool project Aaron

[@WhosTheVoss]

Thanks buddy! I've tried several different angles with multiple cameras and straight down from the top seems to be the way to go :)

[@Mister_Bucket]

sky cam definitely works, Voss

[@WhosTheVoss]

Thanks buddy! :) I hope it helps show the project better when Im explaining things

[@nelsonw2096]

Nice work! I like to use a scrap piece of wood to press down while nailing so I don’t have any finger shots.

[@nelsonw2096]

Also: Overhead Sky Cam is 👍🏼

[@WhosTheVoss]

Thanks! I've tried several different angles with multiple cameras and straight down from the top seems to be the way to go :)

[@dabuzz6611]

Overhead Sky Cam is Da Bomb!, as you kids say!

[@WhosTheVoss]

Thanks! I've tried several different angles with multiple cameras and straight down from the top seems to be the way to go :)

[@IrishFF1972]

Yes I like the sky camera

[@WhosTheVoss]

Thanks buddy! :) I hope it helps show the project better when Im explaining things

[@gruss5157]

What's wrong you don't like no man love❤❤❤❤ you don't like it when another man tells you he❤❤❤❤ loves you😅🎉😅 just smile and Nod😮😂😂🎉
Great video is always two thumbs up

[@WhosTheVoss]

🤣🤣 glad you enjoyed the video! :)

[@higgiepop158]

👍💯👍💯

[@WhosTheVoss]

🤣🍔 thanks Higgie!

[@eeodle]

Yeah what's up joker lol

[@WhosTheVoss]

Yooooo! :)