One thing I noticed that will help with your pieces wandering away on you. You want to pull the saw out, drop it down and make the cut while pushing it inward. Awesome video as always.
I'm liking it all. The delivery is direct and easy to understand. Just the right amount of fun while still being short and sweet. Your skills are noticeably improving. The projects are great for this beginner woodworker with limited tools (and funds). And as a huge bonus your plans are free! I understand the value of them, but just starting out as i am, and times being what they are, its a big deal. Thank you so much. Keep up the good work.
Ok..... I have a question.... I have tried numerous times to make this jig and have no luck. I was gifted an older kobalt 10" miter saw .I have done all I know to do and tried EVERY technique I can come across in order to "tune" this saw. So before I go and throw $300 down on a new saw do you (or anyone else that's reading this) have the capability and means to possibly ship me a pre made jig?. I just need to know costs up front. I have only been doing woodwork as a hobby for 2 years now since I am unable to play drums anymore after 40+ years. Any help is greatly appreciated.
Long time fan. I am very appreciative of you showing how to do this and providing free plans. I am actually making this for my mom. I am going to put my own spin on it but it makes for a wonderful gift. Keep it up, your channel is good!
Thanks SO much for your videos! Your direction is spot on, and you're such an honest and likeable person. I'll be making these for my Texas side of the family :)
Is there a little download button? I opened it and it popped up for me, this is a new image viewer than what I used previously so I want to make sure it works :P freeimage.host/i/JBpPVzx
Questions: what blade are you using on your miter saw? I notice you rarely have tear out. Also, what is the angle of the piece you were sliding between the two pieces when another together? Thanks for another great video. I’m going to make these tomorrow. I think I’m going to make 3 sizes
I use a spyder blade, they seem to stay sharp for a really long time. The board is a 54 degree extra cut, helps to keep my fingers away from the nailer :)
I have made & sold plenty of stars, specifically for Dallas Cowboys fans. The angles are definitely 54º AND 36º. I've also accidentally made a star with 54º & 34º and let me tell you the star was completely off & catawampus since I was off by 2º, then multiply that over 5 corners. I realized my mistake once I went for a fit. Great video, nonetheless!
Note when using a sliding miter saw, you should pull it out pass your piece being cut, power up the blade and then drop the blade down and push through the work piece. This is know as a down cut. The way your using your saw is a climb cut and is a potential hazard to yourself. If the blade kicks, it will jump and come towards.
hi my friend ..i have. question fir you if i can ..i am writing you from costa rica , my question is ....i had seen in pinterest starts made in wood but they are more open inside , I can't find the right angles ,it looks like the pointy one the angle is greater than 18 .do you have any idea ,,,the pictures are in pinterest ,the point is .wider inside you can accommodate more decorations inside ....each star thanks
Ana White has a serving tray with the wider interior, shes got free plans too ;) www.ana-white.com/woodworking-projects/wood-star-serving-tray-or-wall-decor
FREE DOWNLOADABLE PLANS for this build!
www.whosthevoss.com/product-page/nesting-stars
One thing I noticed that will help with your pieces wandering away on you. You want to pull the saw out, drop it down and make the cut while pushing it inward.
Awesome video as always.
Ill be giving this a try! :) thanks!!
I'm liking it all.
The delivery is direct and easy to understand. Just the right amount of fun while still being short and sweet. Your skills are noticeably improving.
The projects are great for this beginner woodworker with limited tools (and funds).
And as a huge bonus your plans are free! I understand the value of them, but just starting out as i am, and times being what they are, its a big deal.
Thank you so much. Keep up the good work.
Thanks Joyce! :) glad you are enjoying the content as much as I am.
You are the VOSS. keep the great videos and the free plans coming.
Thanks buddy! Ive got quite a few more Christmas vids to shoot before December hits ;)
Ok.....
I have a question....
I have tried numerous times to make this jig and have no luck.
I was gifted an older kobalt 10" miter saw .I have done all I know to do and tried EVERY technique I can come across in order to "tune" this saw. So before I go and throw $300 down on a new saw do you (or anyone else that's reading this) have the capability and means to possibly ship me a pre made jig?.
I just need to know costs up front.
I have only been doing woodwork as a hobby for 2 years now since I am unable to play drums anymore after 40+ years.
Any help is greatly appreciated.
Long time fan. I am very appreciative of you showing how to do this and providing free plans. I am actually making this for my mom. I am going to put my own spin on it but it makes for a wonderful gift. Keep it up, your channel is good!
Shes going to love it! Happy building! :)
Another great video and project with a great end product which my wife loves , happy wife happy life lol
Thanks buddy!! Better get one made for her!! :) Happy building
Another fantastic video. Thanks so much!
Thanks!! :)
Thanks SO much for your videos! Your direction is spot on, and you're such an honest and likeable person. I'll be making these for my Texas side of the family :)
Texas size 10-4 Brenda! Thanks for the comment :)
Thanks it’s a fantastic project to do can’t wait to get started
Saaaweeeet!
40 nails! Another great video sir!
So close! I watched that playback three times to find the nail I missed and still couldnt find it. 🤣🤣 I dont know what happened :P
@@WhosTheVoss if I recall, the large star the last section to be nailed only got one nail
Great job and project thx for sharing enjoyed it Keep Building
Thanks buddy!! :)
Great video. Thank you. I’ll be Making this one tomorrow… fingers crossed it comes out as great as yours
I'm sure it will look EVEN BETTER than mine! Good luck buddy!
Wonderful video. Thanks!
Thanks Ron!!
Great job with simple instructions
Thanks buddy :)
Great video! Thank you for sharing...
Thanks buddy! :) glad you enjoyed it
Love the video! Can't download the plans though.
Is there a little download button? I opened it and it popped up for me, this is a new image viewer than what I used previously so I want to make sure it works :P
freeimage.host/i/JBpPVzx
Good job 👏
Thanks buddy!!
Questions: what blade are you using on your miter saw? I notice you rarely have tear out. Also, what is the angle of the piece you were sliding between the two pieces when another together? Thanks for another great video. I’m going to make these tomorrow. I think I’m going to make 3 sizes
I use a spyder blade, they seem to stay sharp for a really long time. The board is a 54 degree extra cut, helps to keep my fingers away from the nailer :)
@@WhosTheVoss thank you!
I have made & sold plenty of stars, specifically for Dallas Cowboys fans. The angles are definitely 54º AND 36º.
I've also accidentally made a star with 54º & 34º and let me tell you the star was completely off & catawampus since I was off by 2º, then multiply that over 5 corners. I realized my mistake once I went for a fit.
Great video, nonetheless!
Thanks Janie, not sure how the 90 degree angle thing didnt math-out when I made these 🤣 :P
Your nail counter insert said 39, but did you include the three nails that were shot to make the jig?
Ill have to ask him next time :) but i think he was counting just the nails for the stars 🤩
Note when using a sliding miter saw, you should pull it out pass your piece being cut, power up the blade and then drop the blade down and push through the work piece. This is know as a down cut. The way your using your saw is a climb cut and is a potential hazard to yourself. If the blade kicks, it will jump and come towards.
Good tip buddy :)
👍💯👍💯. Thank you 🙏🏻.
Those cool 4x4 candy canes are next! 🚲🍗🐈😺
hi my friend ..i have. question fir you if i can ..i am writing you from costa rica , my question is ....i had seen in pinterest starts made in wood but they are more open inside , I can't find the right angles ,it looks like the pointy one the angle is greater than 18 .do you have any idea ,,,the pictures are in pinterest ,the point is .wider inside you can accommodate more decorations inside ....each star thanks
Ana White has a serving tray with the wider interior, shes got free plans too ;)
www.ana-white.com/woodworking-projects/wood-star-serving-tray-or-wall-decor
Who painted your blade black? Never saw that color on a blade before.
Its made by "Spyder" its one of my favorite blades :)
Thanks. A bit scary hard to see.
Does the jig need to be that big?
It's nicer to have a longer edge to put the board you wish to cut up against. But you can make it a tad smaller :)
Joker, I saved the video. I have to go back to work 😂
Have a good day at work! :P thanks for the comment :)
OMG! 😂 I can't stop laughing! I made a star! However, I used one measurement from each sized star! Baahahahahaha!! I so wish I could add a picture
Sounds like something I'd do! 🤣 Little extra firewood ;)
Noice dude! 👍
Thanks buddy!!
My saw only goes up to 45
So does mine :) make a quick jig so you can achieve those 45+ angles, The Christmas Tree builds require 60 degree angles too ;)