Using 433MHZ RF remote controller with CADIO devices (ESP8266 - ESP32) | CADIO Home Automation
ฝัง
- เผยแพร่เมื่อ 29 เม.ย. 2023
- CADIO Website:
egycad.com/cadio/
CADIO Downloads Center:
egycad.com/cadio/downloads/
CADIO Developers Docs:
egycad.com/cadio/docs/discove...
CADIO Firmware For ESP8266:
egycad.com/cadio/docs/firmwar...
CADIO Firmware For ESP32:
egycad.com/cadio/docs/firmwar...
---------------------------------------------------------------
As we have mentioned before, you can control your CADIO devices using 433 mega hertz RF remote controllers.
We can simply add an 433 mega hertz RF receiver module to our unit, and all the unit devices will automatically get this feature.
To use this feature, all we need is a 433 mega hertz RF receiver module, and an RF remote controller.
We have tried many RF receiver modules, and the best results we got was using SRN480R and SRX882 modules.
The regular RF receiver module will work, but its range is not good compared with the others.
Wiring the RF receiver module is too simple.
VCC pin is connected to VCC.
GND to GND.
And the data pin to the ESP GPIO, in my case I will use GPIO13.
Now in the info file, let's tell CADIO that our unit has a 433 mega hertz RF receiver module, and select Its GPIO.
For testing, I will add two ONOFF devices on GPIOs 4 and 5, I will add also an RGB strip on GPIO 12.
I will add an indicator LED for the RF on GPIO1, it will light when the RF receiver receives any signals, and this will help us to make sure that everything is working fine.
Now when we open any device page, we will find a new section has been added, for the 433 mega hertz settings.
To assign a button for this device, we simply click on the signal box, then click on the remote controller button, the received signal will appear in the signal box, then we save it.
Now we can use this remote controller button to control our device.
With the same method, we can assign RF buttons for all the other devices.
Now with the relays and bulbs and the RGB strip being wired, we can normally control them with the remote controller.
Please tell us in the comments about your experience with CADIO platform, and which features you mostly liked, and your suggestions and expectations. This will be taken into consideration during the discussion of future developments, thank you so much for using CADIO platform, we wish you all the best! - วิทยาศาสตร์และเทคโนโลยี
Nice one ❤ please what of the other way round like using Cadio as transmitter to control Gate
Hi, I'm building your device, I ran into a problem with the 433 MHz frequency. I don't have access to these two receivers that you announced in your TH-cam video. Thank you. What other 433 MHz receiver can I use?
Will you be adding Lora for longer range in the future?
Doesn't it support 433mhz card which is MX-RM-5v? I've been trying for 2 days but it's not working?
How I can make water level indicator with
Shedule in cadio home automation app .
Why there is no update video from you? like its been 7 to 8 month since no video is uploaded?
Can we use as RF remote module in cadio
After uploading cadio firmware Esp8266 and configuring device can't showing
Can we use cadio for commercial use
can we link a 315 MHz remote control?
the only problem is there is no free version of cadio like the other IOTs blynk, rainmaker, tasmota and arduino cloud.
Cadio must be focused on connecting different types of sensors.
Please add ultrasonic sensor hc sr-04 and analog pin of mq 5 gas sensor
can i use D35 as receiver?
Please make home automation with 2 ESP8266 module for 2 rooms and control
With 1 mobile 🙏
I accidently fried my esp32 unit with purchase license. Do i need to purchase new license for my other new esp?
Please contact cadio@egycad.com
Sir I have problem I am use esp8266 with extra mcu but mein line off and on to all appliances not a previous state
Feel free to send your circuit diagram and the code you are using to cadio@egycad.com to review and debug.
❤❤❤❤❤❤
Sir I have problem I am enabled a serial print and realy mode is active low with extra mcu
Bur problem is esp8266 main power supply off and restart our appliance is not a previous state
The active-low option in the info file is for devices on the esp, for the devices on the extra GPIO, you need to edit the example code for them
waiting for the ESP32 cam project
please add configuration option at any time😢
You said you will make fan dimmer ,also we need ir remote controlled switches
IR remote controllers feature in now supported!
th-cam.com/video/TCRG25qMikc/w-d-xo.html
fan speed control is now supported
th-cam.com/video/HcYCt668MMo/w-d-xo.html
@@cadioHomeAutomation thankyou very much now i can buy licence, without any hesitation
Make some project using esp 32
Why just 433Mhz what about 315Mhz? It's still within the ISM bands.
olease add ultrsonic sensor hc sr-04 and analog pin of mq 5 gas sensor
My home Bangladesh I love your video 🙏please make video ESP8266 2 piece & single CADIO apps please make video🙏🙏😥😭😭😭
Glad you liked it ❤️
To add multiple units, just repeat what you did for the first unit for the second, third etc.. Everything will be automatically handled.
Can you pls explain with circuit diagram the 3-Way switch connection
egycad.com/cadio/docs/info-file/general-settings/#switches-mode
is it possible to add fan dimmer
@@cadioHomeAutomation How, please show us, We need tutorial. Fan speed control is so important so that we can use full potential of it
th-cam.com/video/HcYCt668MMo/w-d-xo.html
we need to control servos and stepper motors please!!!!!!!!!!!!!!!
Sir your vedio is amazing but dealy uploading vedies
pricing is very high ,for that much price we can buy prebuild product including all hardware .should give some discount .
8 appliance can control rf remote
Yes
Neden Türkçe sürüm yok 🤔
My home Bangladesh I love your video 🙏please make video ESP8266 2 piece & single CADIO apps please make video🙏🙏😥😭😭😭
Glad you liked it❤️
To add multiple units, just repeat what you did for the first unit for the second, third etc.. Everything will be automatically handled.