Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Near tank first shall be valve and then other fittings should be started, so whenever any maintenance work is to be done , can be taken up after shutting of the valve.
The drilling of hole on the tank was correct , however the plastic material waste which was inside the tank was not removed , tephlon tape applied is incorrect total wastage of tape , first you installed a black material then the vedio was edited it was shown in white . Save money and material of the owner so that it would be a learning opportunity for other PLUMBERS who do the outdated work and also for the new plumbers. Good luck for more improved vedios .
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Why you apply such a lot of tuflan tape ??what is the purpose of using some agent between treads?? It ll not reach full thread dear, and it may create crack in the coupling in the future , due to pressure in the coupling... you can apply litharge and glycerene mix instead
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
மிகவும் நல்ல பதிவு சார். அனைவரும் பார்த்து தெரிந்து கொள்ளுங்கள். இந்த பதிவு. கொடுத்த. உங்களுக்கு மிகவும் நன்றி சார். அனைவரும் பார்த்து தெரிந்து கொள்ளலாம் மேகநாதன்
Avoid using excess gum and press firmly after putting the joints. Another important thing , routing the line from the motor should be close to the wall. If you route the way you have routed, it will be a disturbance while using the floor for any purpose.
Bro u made one mistake before using the unions first u should fit the gate volve then union, 2ndly instead of using double elbow u could easily use one tee and one elbow and that would be better and cheaper, first use tee the upper side of the tee u should connect the exhaust.
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Are bhai sahab app plastik ka pipe and feeting use kr rahe ho to app ko tank nipal ke sath union lgane ki kya jrurat hai directly connect kijiye na aur kabhi bhi tanki ko change karna ho to pipe line katna hi padega tab bhi lga sakte ho ap union
كنت باتعمل بعد المحبس القطعه التي على حرف T باتستفيد منها تهويه الى الاعلى والاتجاها الاخر الى الاسفل و وسط القطعه يكون باتجاه الخزان ومنها تكسب نزول اقوى للماء لانه المكان الصحيح للتهوية ومنها توفر للقطعتين التي على شكل L الذي اسرفت فيهم دون فائده .. وتحياتي وتمنياتي لك بالتوفيق
Union kaun hisab se phle dya hai bhai agar hmko union kholkar pani stock Krna hga tb kya kroge.mai yeh kaam se satisfied nhi hu.....phle valve lgta hai uske baad union..
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Bhai hmari summer 1" inch Hain toh inlet 1" Hoga Toh outlet tank connector Kitna inch mein lagaye or basin Takk Kitna inch mein rahega plz batana Bhai ???
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
@@mohamedmansoor3652 I’m been plumbing for 10 years. If you are using this much Teflon with this head pressure then just quit your job. YOU ARE NOT a plumber Mohamed.
सबसे बड़ी चुनौती ये है कि टैंक के फर्श में (सरफेस पर)पानी निकास की व्यवस्था बहुत ही जरूरी है।वाटर टैंक बनाने वालों को एक ऐसी व्यवस्था करनी चाहिए, जिससे नीचे जो गंदगी-मिट्टी जमा होने पर टैंक के अंदर साफ करना बड़ा दूभर और मेहनती काम हो जाता है,उसकी व्यवस्था सबसे जरूरी है। अतः टैंक बनाने वालों को कोई नई तकनीक से फर्स की गंदगी सुलभ तरह से साफ हो कि व्यवस्था बनानी चाहिए ।प्रायः होता ये है कि गंदगी साफ नही होने से बहुत से इक्विपमेंट RO मशीन वैगेरह गंदगी-मिट्टी की वजह से बहुत जल्दी जाम वो खराब होते हैं। अतः इस काम पर विशेष ध्यान देकर यदि टैंक बनता है तो वो ज्यादा पसंद करेंगे लोग। उसकी बिक्री भी अधिक होगी।👌
Eso de usar teflon es prehistorico Ahora llevan una goma o orrin como lo llamen en su pais el fabricante te suministra todo el equipo de instalacion completo
actually tank base should be less than the diameter of tank, otherwise rain water get into the bottom of the tank and plants like baniyan tree will grow there..
Koi galat nahi hai fitting me bhai ball walve chahe aage kar do chahe union ko aage kar do isme koi galat nahi hai o to sirf tanki ko aalag karne ke liye kiya jata hai bhai
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
ਵਾਲਵਾਲਵ ਪਹਿਲਾਂ ਫਿਰ ਯੂਨੀਅਨ ਲੱਗਣਾ ਸੀ ਤੁਸੀਂ ਦੋ ਕੀਤਾ ਗਲਤ ਹੈ
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Es duniya kapahla anokha plumber maine apni jindagi me pahli baar dekha hai 😂😂😂😂😂😂😂
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Only two wraps of Teflon tape needed on tapered threads,
NOT THE WHOLE ROLL!
Nhi vo thik kiya hai cause it won't be leak
I think, they say: put the tape on it.... Yeees and roll roll and roll :)
In that case, i think it can leak
Water tank threads are called NPT threads and they are tapered and get tight after only three turns, a minimal amount of tape is required.
The Air Valves should have come before the Unions
and also you have turned the Unions
Why all of the Teflon tape?
ही plumbing ची माहिती सर्वानाच उपयोगी आहे
This pluming technology is useful to everyone.
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Why would you put union first it supposed to shutoff valve to tank then union and yes clean as you go.
Amma
Union before stop cork
@@ifeanyigchukwu4975 5th
I also want to say that😜😜😜
Only he want to make video but he dont know where is wrong🤭🤭🤭
Why so much white seal tap ...Teflon tape is wound, less also can do I think, instead of full role consuming
Connect to the tank you must put valve before union
Hahahaha... before too long the floor would be crawling with pipes too...
Yes bro
Also the air pipe should be before valve
वीडियो मस्त है भइया जी बॉल बॉल पहले होना चाहिए गलत कम में view ज्यादा मिलता है दोस्त
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Are waha kitni achi fitting ki....Hamare yaha naye ladke bhi purane tarike fitting kar rahe
Nice video😊😊😊 good job bro👍👍
Near tank first shall be valve and then other fittings should be started, so whenever any maintenance work is to be done , can be taken up after shutting of the valve.
th-cam.com/video/iSnPO7U8AhU/w-d-xo.html
All moter ka deta sirf 1 mint mai nikale
Correct 1st ball valve and then should be next union you know why because how to repair if trouble shuth
@@reantadeo1266
@Rean Tadeo
U r right!!
Gate valve, union நுக்கும் tank கிற்கும் இடையில் இருப்பது நல்லது.
ஆமாம்,
அது stop valve
Why using too much Teflon... Its causes crack the male adapter.and for the end cap why you using solvent..? Then what's the benefit of end cap...?
Your instructions are great. Love your vide and learn much. Keep up the good work!
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
The drilling of hole on the tank was correct , however the plastic material waste which was inside the tank was not removed , tephlon tape applied is incorrect total wastage of tape , first you installed a black material then the vedio was edited it was shown in white . Save money and material of the owner so that it would be a learning opportunity for other PLUMBERS who do the outdated work and also for the new plumbers. Good luck for more improved vedios .
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Why you apply such a lot of tuflan tape ??what is the purpose of using some agent between treads?? It ll not reach full thread dear, and it may create crack in the coupling in the future , due to pressure in the coupling... you can apply litharge and glycerene mix instead
Itna time leliya yar aur union se pahle ball wall lagana chahiye na agese khayal rakhna yar good job 👍
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
First valve and then union to be fitted.
Right
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Electricals and plumbing tools video bro
Super bro 🤣😂🤣😂🤣😂🤣😂
yes you are right！
টেপে গুলু লাগাতে ২০ বছরে দেখিনি, প্রথম দেখে অবাক হলাম, কোন টেকনিকেল কলেজের চাএ ভাই
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Show us how to install solar water heater?
whats the purpose of the two long tube facing up?
لاخراج الهواء من الانابيب عند ملئ الخزان عند الافراغ
For air
Air tube
യൂണിയൻ ഉള്ള കണക്ടർ കിട്ടും (സോൾവ്ന്റ് സിമന്റ് പുരട്ടുന്ന രീതിപോലും ശരി അല്ല. ടാങ്കിനുള്ളിൽ കയറാതെ ഫിറ്റ് ചെയ്യാൻ പറ്റും )
I'm new subscriber bhai
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
It's high time to change the hacksaw blade. What a rusty one he is using
Es una exajeracion de teflon,me equivoco?
How to repair mild hall in middle part of the tank
Nice good job ☺️👍👌💯
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
100 percentage the plumber belong to Orissa. Where he learnt plumbing. Great Oriya plumber.
Bhai Tum nea tank nipal kea badd kya kya lagya please reply bhai good feeting🎉🎉🎉
Thank you
Very easy and perfect fitting
I love you anuraag bai pro cricket expert love you❤😘🤟🤟🤟❤ from India🇮🇳🇮🇳🇮🇳
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
Kitna easy ho gaya hai pipe ka fitting kerna 😃😃😃
Good video bhai air trr KO leboow ke jga lga dete to or unyan ki jga Ball KO 😁
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Gate valve k baad Union lagana chahiye,from Bangladesh
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
RIGHT BRO YAHI M DEKH RAHA HU YAAR
Uniyan pele laga k sabit kar diya ki aap bhot ache pilamwar ho ....🙏🏻
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
மிகவும் நல்ல பதிவு சார். அனைவரும் பார்த்து தெரிந்து கொள்ளுங்கள். இந்த பதிவு. கொடுத்த. உங்களுக்கு மிகவும் நன்றி சார். அனைவரும் பார்த்து தெரிந்து கொள்ளலாம்
மேகநாதன்
''
Avoid using excess gum and press firmly after putting the joints.
Another important thing , routing the line from the motor should be close to the wall. If you route the way you have routed, it will be a disturbance while using the floor for any purpose.
Thank you sir for comment
@@learnpassearnprofessional7467 Thank you for taking my advice in a right spirit.
Wellcome sir
W0al00q
Bro u made one mistake before using the unions first u should fit the gate volve then union, 2ndly instead of using double elbow u could easily use one tee and one elbow and that would be better and cheaper, first use tee the upper side of the tee u should connect the exhaust.
u shud use two 45 instead of 90° bend for better water pressure
Thank you
من الأمثل تركيب المحبس قبل الاكور التجميع
Kyo Bhai get wall ke jagah par union laga rahe ho.
1. Get wall
2.union
3.air pipe
That is wrong installation gate valve first after uninon...why? If the union lake you drain first water?hehehe...
Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺
You right
Aquí en México a esos trabajadores les llamamos chambones! Pésimo trabajo!
Teflon tape sales video!
first bend me tee dalta to..vein pipe usme daal sakte the...1 bend kam ho jata thaa
Hhùb
Nice.video....🙏🙏🙏🙏🙏
Thank you
العمل فيه خطأ التنفيس الخاص بالخزان يجب ان يكون عند نقطة نزول الماء وليس تنفيس على البلاط ...،
والخطأ الثاني القفل او الكاك لازم قبل النونيه مو بعدها
Bai sahab pehle gate valve lage ga ya union...
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Bai sahab jo kam kr rahe ye kam bagair fit kiye b kr skte the
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Silencio pipe or swr pipe dono ek Hoti Hain ya dono alag ????
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
This guys spends more in Teflon tape than I pipes
🤣🤣
Yes. I was also thinking the same
Too much tape man
Customer Ke Paise ke tha kaam with material nahi tha 😝😹
APVC or CPVC Pipe & fittings are durable than pvc pipe & fittings.
Tank sea 2 hole kiya naa usmea pipe connection thiyaa uska connection ka name kya hea?
Are bhai sahab app plastik ka pipe and feeting use kr rahe ho to app ko tank nipal ke sath union lgane ki kya jrurat hai directly connect kijiye na aur kabhi bhi tanki ko change karna ho to pipe line katna hi padega tab bhi lga sakte ho ap union
Thank you
Que tal jajajajajaja te pasaste de lanza con los 4 kilos de teflón para cada conector mucho gasto
Yo veo que es de eso teflón malo y delgado que no sella nada.
Nice work
Clean as you go. The plumber or tech doesn't have to wait until he finished the job before do the cleaning
Air vent ke pipe wrong Lage hain air lock ho gi confirm
@@muhammadrafique2889 को
this more than 400 liters tank bro
Ive never in my life seen somebody use that much virgin tape in my entire life 🤣🤣
Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺
It baffles me too. Then to add pipe cement!!
In India, most of the plumbers like that. When the fittings are in correct size, no need of Teflon tape.
كنت باتعمل بعد المحبس القطعه التي على حرف T باتستفيد منها تهويه الى الاعلى والاتجاها الاخر الى الاسفل و وسط القطعه يكون باتجاه الخزان ومنها تكسب نزول اقوى للماء لانه المكان الصحيح للتهوية ومنها توفر للقطعتين التي على شكل L الذي اسرفت فيهم دون فائده .. وتحياتي وتمنياتي لك بالتوفيق
I cant read the Arabic literature... however thank you very much for your feedback.
May God bless you
Or sar ap ny uoniyan bhi pahly lagai hy wol sy
Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺
Any idea to repair
Sir khali teflon tape pani kasy rok sakta daga to lagaya nh
Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺
Union kaun hisab se phle dya hai bhai agar hmko union kholkar pani stock Krna hga tb kya kroge.mai yeh kaam se satisfied nhi hu.....phle valve lgta hai uske baad union..
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Bhai hmari summer 1" inch Hain toh inlet 1" Hoga
Toh outlet tank connector Kitna inch mein lagaye or basin Takk Kitna inch mein rahega plz batana Bhai ???
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Y no complete vedio
which one is cames 1st union or gate valve
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Good job
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
Muy bien trabajado
An entire roll of Teflon for one fitting. My boss would fire me on the spot.
You are not plumber rong installation
@@mohamedmansoor3652 I’m been plumbing for 10 years. If you are using this much Teflon with this head pressure then just quit your job. YOU ARE NOT a plumber Mohamed.
Used 4 rolls of Teflon tape- wtf?
😂😂😂👍
Baal walb ke baad union lgane ka n bro?
Is it 400 ltr tank.but in appearance its big and a higher cap one.
Is it 400L or 4000L
Sorry for saying but you should put valve before union
Thanks for your comments. Please share our videos to your friends and country. Like us support us and subscribe to our channel. Be happy ☺
सबसे बड़ी चुनौती ये है कि टैंक के फर्श में
(सरफेस पर)पानी निकास की व्यवस्था बहुत ही
जरूरी है।वाटर टैंक बनाने वालों को एक ऐसी
व्यवस्था करनी चाहिए, जिससे नीचे जो गंदगी-मिट्टी जमा होने पर टैंक के अंदर साफ करना
बड़ा दूभर और मेहनती काम हो जाता है,उसकी
व्यवस्था सबसे जरूरी है।
अतः टैंक बनाने वालों को कोई नई तकनीक से फर्स की गंदगी सुलभ तरह से साफ हो कि
व्यवस्था बनानी चाहिए ।प्रायः होता ये है कि
गंदगी साफ नही होने से बहुत से इक्विपमेंट
RO मशीन वैगेरह गंदगी-मिट्टी की वजह से
बहुत जल्दी जाम वो खराब होते हैं।
अतः इस काम पर विशेष ध्यान देकर यदि
टैंक बनता है तो वो ज्यादा पसंद करेंगे लोग।
उसकी बिक्री भी अधिक होगी।👌
Eso de usar teflon es prehistorico
Ahora llevan una goma o orrin como lo llamen en su pais el fabricante te suministra todo el equipo de instalacion completo
Que raro si en estados unidos siguen usando el teflon o pasta teflon
Prehistórico??😂😂😂😂
Pasta sella roscas Siller.
actually tank base should be less than the diameter of tank, otherwise rain water get into the bottom of the tank and plants like baniyan tree will grow there..
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
Hahah banayan tree😀😀😀😂
@@rebotiborah666 you're also make..
it's banyan tree
@@rebotiborah666 anyway, thank you..
Yes you are making mistake, ball valve should come before coupling....
Bhai Kam to galat Kar rahe ho ball valv Union ke pahale lagata hai
Yes
Right
Koi galat nahi hai fitting me bhai ball walve chahe aage kar do chahe union ko aage kar do isme koi galat nahi hai o to sirf tanki ko aalag karne ke liye kiya jata hai bhai
@@AjitKumar-oj7rl tanki ka pani kaise rok skte fir agar pipe line me kahi leek ho to🤔
Yes
Why dont connect both outlet? So only circulation inside tank
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
OMB WALL MAGIC COAT 🔥 क्या आप गर्मी से परेशान हैं क्या आप गर्मी से मुक्त होना चाहते हैं यदि हा तो हम आपके लिए लाए हैं गर्मी कम करने वाली बाहरी कोटिंग
Thank you
Koun sa plumber hai jo ballvalve union ke baad lagata hai
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
good video
Thank you
New new plumber
Wc standard, Union 1st then valve?
Thank you
Bhai cam to flat kr the ho.phele union rhega .ush ke bad volwall rhega.nahi to thki Ka Phani bagar girne legaga
Thnaks for your comments. Please share our videos to your friends and country. Like us comments on our video and subscribe to my channel.
Valve k bad elbow ki jaga Tee Laga dete Air k lye tou zada acha tha
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
Better one on our channel
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
I don't know... I think they need more Teflon tape.😅🤣
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
First Tank Nipeel Tee Elbow Ball Vall Last Uonin Pipee Fitting Karana Bhai
Thanks for your comments. Please share our videos to your friends and country. Like us support us & subscribe our channel for more videos. Happy Watching
Thank you
Por que le pone tanto teflon?
how to came professional plumber
itni derr main tank k saath pressure pump bhi laga deta c.p.v.c. aashirwaad hota toh
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
It's important work I like it because I want to be good worker
Thank you sir
If you want to be a good worker....
Please see videos of other experienced plumbers....
Here, in this video, the fitting is completely wrong....
Watch correct video and learn
Sir
Air lock pipe should be kept before the bend...
TH-cam/DCS vizag
Yes,
Later on we modified thank you for your valuable feedback.
May God bless you
Super
Thank you
Is this really 400 litres tank ?
Thank you for your comments. Please share our videos to your friends and family. Like us, comments on our videos and subscribe our channel.
Please reply is it 400 litre water tank or not ? Nobody would share & like such wrong videos.
nice wark
the airlock system was the best
Thank you for your comments. Please share our videos to your friends and family and country. Like us, support us and dont forget to subscribe our channel.
good..
Thank you for your comments. Please share our videos to your friends and country. Like us, support us and subscribe to my channel.
Har bar union khil k lagana chaye solution joint me ja sakta hai or union useless ho jayega
Mea bi bhai plumbing apprentice pea hu🎉🎉
Thank you