I had a gunsmith tap and drill the two holes on the rear of the trunion, then the adapter and stock / brace just screws in, check out SLR Rifleworks for the exact adapter part number, I think it’s made by Stormwerks 🙏🏿🦾
Do you have the folding adapter bolted on to the receiver or is the receiver tapped for a direct thread to the receiver. I’m working on my Micro at the moment.
The folding adapter is held onto the receiver with two screws that are drilled and tapped, then you just screw in the stock to the adapter. When you drill and tap the receiver the holes are horizontal, so multiple adapters will work, also the U.S. Machine Gun adapter 🙏🏿.
I think you can, I already had this one laying around so I put it to use. I might pick up the one SLR Rifleworks has on their website, it looks pretty cool 🙏🏿.
Yo can you please help me, im doing form 1 on my century arms mini draco and i'm unsure of the manufacturer, mine says romarm/cugir but when I type that in , its not in the database. What does your manufacturer say on urs?
Great setup! I'm going to get the stormwerkz hing too for my m92 pap and I think I will get manticore triangle stock. I know this will sound like a cheap trick but I really suggest putting small peace of rubber tubing over your mag release just a bit longer than the lever itself. It works amazing for extending the lever a little and makes it much more comfortable on your thumb. Really aids to an easier more consistent reload
Buy the stormwerks folding adapter for AK’s, if the Ras 47 has a flat rear trunion you just tap and drill the two holes, and install the adapter, then bolt the stock. Check out SLR Rifleworks website, go to AK stocks and they have the part number fir the folding hinge 🙏🏿
Can I just by the folding stock or do I need to file a form
You have to Form 1 for the stock, unless you go with the Stormwerks folding hinge for braces 🙏🏿
Who did you gunsmithing? Thinking about doing it to mine!
I had a gunsmith tap and drill the two holes on the rear of the trunion, then the adapter and stock / brace just screws in, check out SLR Rifleworks for the exact adapter part number, I think it’s made by Stormwerks 🙏🏿🦾
Do you have the folding adapter bolted on to the receiver or is the receiver tapped for a direct thread to the receiver. I’m working on my Micro at the moment.
The folding adapter is held onto the receiver with two screws that are drilled and tapped, then you just screw in the stock to the adapter. When you drill and tap the receiver the holes are horizontal, so multiple adapters will work, also the U.S. Machine Gun adapter 🙏🏿.
Hey @valorlife did you have any trouble installing the Alf trigger on the Draco?
No it was pretty straightforward, no issues, also have the plate installed for the pins 🙏🏿
Thank you for answering do yo also have the alg recoil spring?
@@emilioherrera7728 running stock recoil spring 🙏🏿
Thank man preciate it
I thought you could only use their “Synergy Hybrid Linear Comp” muzzle device with that SLR handguard??
I think you can, I already had this one laying around so I put it to use. I might pick up the one SLR Rifleworks has on their website, it looks pretty cool 🙏🏿.
How does the olight attach to the mlok slr handrail
Bought a small Magpul pic rail that it sits on, I think it’s the smallest they make for the small MLock slots 🙏🏿.
Bro you might have the best mini draco on the tube🤙🏾
Thanks man, the SLR stock does make it look sick 🙏🏿.
Absolutely FIYYYYA🔥
That’s a really cool set up man!!
That Draco looks 🔥!
Yo can you please help me, im doing form 1 on my century arms mini draco and i'm unsure of the manufacturer, mine says romarm/cugir but when I type that in , its not in the database. What does your manufacturer say on urs?
It’s century Arms International I believe, hope this helps 🙏🏿.
Nice draco. Does the SLR stock require a tax stamp to be it on that draco? I'm trying to do a similar build.
Yes you need to file a Form 1 and have it approved before you can put a stock on any pistol 🙏🏿.
Great setup! I'm going to get the stormwerkz hing too for my m92 pap and I think I will get manticore triangle stock. I know this will sound like a cheap trick but I really suggest putting small peace of rubber tubing over your mag release just a bit longer than the lever itself. It works amazing for extending the lever a little and makes it much more comfortable on your thumb. Really aids to an easier more consistent reload
Thanks man I’ll try that rubber tubing 🙏🏿
Can we get a part # on folding mechanism
Stormwerks Folding adapter Part Number # SFM-UNI-01 🙏🏿🦾
Looks great. Do you need reinforcement plate for the pistol grip with this stock?
No reinforcement plate needed, super solid
Hi did you have to cut anything to install the adapter in the first place?
Two holes need to be drilled and tapped into the back of the receiver 🙏🏿
Ok thanks a lot
Will the adapter work on a pap92
Not this one. The M92 has a angled rear trunion. U.S. Machine gun makes a adapter specific to the M92 and it works the same 🙏🏿.
How would this mount to a RAS47 pistol?
Buy the stormwerks folding adapter for AK’s, if the Ras 47 has a flat rear trunion you just tap and drill the two holes, and install the adapter, then bolt the stock. Check out SLR Rifleworks website, go to AK stocks and they have the part number fir the folding hinge 🙏🏿
stormwerkz.com/stock-folding-mechanisms/stock-folding-mechanism-standard/
You got the tax stamp for that?
Tax stamp yes sir 🙏🏿