NEC PA500U Projector Disassembly, Diagnosis & Repair Calibration of the Iris has Failed Error
ฝัง
- เผยแพร่เมื่อ 21 ก.ย. 2024
- Video covering the diagnosis, disassembly and repair of an NEC PA500U data projector that wouldn't start due to the error: "Calibration of the Iris has Failed"
Should also apply to NEC PA600X/PA500X/PA550W/PA500U
The fix essentially involved removing the iris assembly, giving it a bit of a clean and running it through its range of motion several times to unstick it.
If your projector is hard to access and you want to change the bulb at the same time, you can also save some money buy just purchasing a bulb only and re-use your existing bulb housing eg: amzn.to/2PdhsQF
If you want more info about the iris part itself, I found another short TH-cam video that demonstrates its operation here: • NEC PA550W iris repair
Note from repair of 2nd projector:
I noted in the video that our church has 2 of these. The one I repair in this video was completely faulty and would never start up. Our 2nd one would be fine 90% of the time, but would occasionally make the clicking sound and give auto iris fault. Upon opening it I found that the iris moved freely, so cleaned the sensor with compressed air. The 2nd projector hasn't been in tested for long enough for me to be happy to confirm that this (dirty sensor) was the issue.
Thank you so much for your service, sir. Another happy viewer who has fixed their projector after watching this 👏🏽
This video saved me throwing a perfectly good projector out. Top man 👍👍👍
Worked a treat, thanks for taking the time to put your videos up, brother. Jesus wins!
Hi Steve, thank you veeery much! Your video helps me fix the same problem on the same model of projector.
It's so cool 👍🏽🙏🏾.
I recorded my experience to share it with my french speaking people and will upload the video asap. Will let u know! Big thanx!!
Matursuwun boss ilmune
Thanks mine was exactly the same as up and working now.
EVERY time you fast forwarded I sh@ myself - I thought you have been shocked! Every time...!
Thy, i repaired mine too. 👍
you are awesome. thank you for the video
Hola tengo el mismo problema ! voy a probar te aviso , otra consulta se puede adaptar una lámpara más grande lumenes , muchas muchas gracias
buen video ... saludos
If anyone is seeing this, what does a big purple circle in the center of the screen means
What software are you using to see what the error codes are via the LAN? Thanks
Hi friend I'm wanting to build a outdoor movie theater 500" what do you think about the NEC np-pa622u?
what is the network software you use ...?
so my headlamp popped. how do you change it?
also can you show how to change the filter?
Hi Steve I have one of these I'm having trouble with it powering up I have looked thought trouble shooting guild and there is not a procedure recommend.
power is orange
status green
lamp red
temp no light
nothing is flashing have changed globe no difference
Would you be able to recommend a solution is there a reset code ?
thanks for your time
Did you find an solution to your problem?
Lamp has exceeded hours and projector is in standby mode, you need to press the ‘help’ button on the remote for 10 seconds after a lamp replacement to reset it
lamp not bulb
El video me encanto, es el mismo daño lo de mi proyector, lo único que no pude salvar el iris del monitor, me gustaría saber si el iris lo venden en panamá