DIY Chicken Feeder and Waterer
ฝัง
- เผยแพร่เมื่อ 27 ก.ค. 2024
- Easy DIY chicken feeder and waterer to make chicken keeping simpler and less labor intensive. All items to make these are available on amazon through the links below:
30 Gallon Barrel: amzn.to/3NkaxoR
14 Gallon Barrel: amzn.to/3OSO4An
Feeder Ports: amzn.to/3qqqIrH
Water Nipples: amzn.to/3qpL04v
Cone for Feeder: amzn.to/3oKnQFn
Thanks for Watching! - บันเทิง
Those feeder ports are handy but I had to hang a stainless mud pan in my Marans coop to accommodate my boys. With those big thick rigid combs of theirs they can't get their heads in them. Just had to mount the pan high enough for the boys to reach but not the girls.
That is a great idea! Thanks for sharing!
Once you get the pilot hole drilled, stop and put the drill in reverse you'll get a cleaner cut and it won't grab and twist out of your hand when cutting plastic.
Good tip, thanks!
Also use the clutch setting on your drill too and you won't hurt your wrist.
Good vid...👍
Run your Hole saw in reverse when cutting plastic. It will give you a cleaner cut.
Thanks for the tip! Will have to try that next time!