Longer B1 30W Laser Detailed Assembly
ฝัง
- เผยแพร่เมื่อ 13 มิ.ย. 2023
- Detailed assembly and startup of the Longer B1 33-36 Watt laser, including setup in Lightburn.
33-36W Output Power & 6-core Laser Head
Highly concentrated laser beam, increase 20%+ cutting capability, cut 25mm basswood and 50mm acrylic by multiple passes
17.72 x 17.32" / 450 x 440 mm engraving area, especially ideal for A3 panels
Engraving speed up to 36,000mm/min, 32 bits chipset
Equipped with smart Air-Assist system automatically controlled by Lightburn
8 major safety protections and sturdy frame
Available in two models. 20 watt and 30 watt:
20 Watt: s.zbanx.com/r/h0hgV8c46ykB
30 Watt: s.zbanx.com/r/f5JZrNtSGkHn
More videos on this laser coming soon! - แนวปฏิบัติและการใช้ชีวิต
Just assembled my new 40 watt. Your video was very helpful.
I just bought the 40 watt. I can't wait to assembly and give it
STEVE MAKES EVERYTHING video (is
this the best laser of 2023). Watch it and he explains to use in lightburn GRBL not GRBL-M3 setting. Just thought i would mention it.
This is a beautiful laser. I will have to save my couch change for this one! It certainly looks amazing!
Don’t do it longer doesn’t stand behind their products at all been fighting for a month with them
@@chrisciraldo4935 It is funny that you posted this. I ended up buying a Creality Falcon 10W and it is working great for a fraction of the price for the Longer B1. I realize they don't compare to each other due to Longer's 30-W, but I am happy with my choice. Thanks for looking out!
I just purchased a Longer B1. I hope to see more videos on it, to help me set it up and use it.
More coming soon
How has yours been Iv had nothing but bad luck with mine
@@chrisciraldo4935 Using it in a production-type setting and no problems.
Ya I think I got a dud unit and they won’t fixnit
@@chrisciraldo4935any luck contacting them?
Nice video great video looks like an awesome machine 30 watt output should have be able to handle some stuff one day I will own one
I Just bought this powerhousee
Hi am in botswana and wld like to buy it kindly put in touch with the manufacturer
That's cool
Mine has arrived today I can’t wait for more videos of it I’m building tonight and trying the test you showed I made one in lightburn for test but do you have a better created file than the stock
Out of curiosity, which driver did you use? I'd seen a video saying the base Laser GRBL was the only one that worked, but that Lightburn defaulted to a newer one that caused the laser power to 'stick' on for want of a better term.
I have a Neje A40640 (10w) on the 3s chassis (540mm*850mm), and it's MAX speed is 1000mm/m. I'm really looking to upgrade, but a lot of the work I do needs the larger bed size, so it's kind of up in the air whether it's worth the extra $1000 for the things I don't use the larger bed for. All the new 30-40w lasers will fit in the bottom corner of my Neje lol.
Default driver. I don't use Laser GRBL.
Just got my Longer B1 30W laser up and running. Unfortunately, it homed the first time connected and now it won't do it again. It is reading the x and y axis backwards and inverting. If I use the User Origin and mark the middle, it doesn't use that. It actually moves and hits the rails. Any advice would be great!
Assuming you are using Lightburn...........Are the settings in Lightburn correct? Home left front and bed size set accurate in the setup. If these are correct, then you will need to contact Longer as this seems very odd.
I. Plan on getting this Lazer so thank you for the video.
Could you please give me the outside dimension and hight I have some plexiglass that I might use to make a box of some tipe to control the sound and smoke.
Well Roger I have mine 2 weeks now all of a sudden it quit working cut three small projects with it .
Now I turn the machine on don't do anything don't go home on startup. the arrow keys some work some backwards.
Contacted longer told to try reburning the firmware that didn't do anything to them I want to send the machine back faulty. now I don't hear anything from them.
That does sound like a firmware or motherboard issue. I am not affiliated with Longer, so can't help you there. It does take 24 hours to receive a reply from them during the week due to time differences and they do not reply on weekends.
Roger what do you have origin set at in device settings. I went into preview to look at cut job looked ok but when it Cut is was upside down.
I have a longer B1also any help wood be appreciated. Donnie
Lower left or center if not using Absolute Coordinates. When using Current position (rare), I use center as the origin.
Hi Roger,
I just finished assembling my new B1. Upon homing, the x axis limit switch is not contacted by the laser module bracket. It looks like it should move at least another 12mm X- to contact the switch but stops solidly. I don't see any way of adjusting it. Starting to wonder if the mounting holes for the switch were machined out of location. When your B1 is homed in the x axis how close is the module bracket to the stepper motor? Any other ideas? Thanks
I'm not at a location where I can look at it, but I had no problem with the X axis. On the Y axis, there are two sets of mounting holes. One for the 20 watt and a second for the 30 Watt. I don't recall if the same is on the X axis gantry, but you could take a look.
Thank you. Is it worth starting out with this or going for the cheaper Ray 5 20W. I am an enthusiast wishing to engrave and cut.
If you intend to do a lot of cutting of 1/4" or thicker materials, then the 40W is a better choice. If mostly engraving and cutting 1/8" plywood, then the Ray 5 is fine. It all depends on end use.
It is kinda like MOTORCYCLES.... You buy a "small" bike, then, two weeks later you want a BIG ONE............. a 30-36 watt laser will perform good "engraving/marking" while having the higher power to cut more,better, FASTER....
What kind of goggles are those that you have on?
Cloudray. Not cheap, but high quality: amzn.to/3j82Llp
I would like to ask if the lens changes to the longer b1 22watt
Not sure I understand the question, but the 20 watt and 30 watt heads are different modules.
Any way you can possibly make a video of setting up wireless for this thing
There are two reasons I do not use wireless. First, and most important, is if there is a dropped packet in the wireless transmission, the project is ruined. My second reason is that the wireless in the shop is 5G. The laser only supports 2.4G. I never use a wireless connection for anything "important".
@@rogersshop very good info never thought about that Iv always dedicated wired but can’t figure out how to upgrade the firmware
Note to self: Wait until AFTER 4:20 to burn one.... When you are installing the Y axis belts, insert/fasten the belt into the "slot" nearest to the REAR on the machine, then, move the X gantry FULLY TO THE REAR, THEN and only then attach the belts from around the pulleys in front, to the open belt slots in the rear.... Installing BOTH belts when the gantry is somewhere in the "middle" of the Y axis travel, you are NOT assured that both sides/belts are properly synced/aligned together - in the same relative position as each other.... I hope others will catch this mis-information and assemble their new machines following a "proper" procedure.... AND at 13:44 Don't grab the belts when moving the frame, your just stretched the hell out of them...
How do you adjust the homing speed on a longer B1
Change the $25 setting to a higher number. If using Lightburn, this can be done from the Console.
Hi can this machine do glass and wood
Cut and engrave wood. Etch glass, if coated.
😊😊A
I am in botswana how can I order one
Try this: s.zbanx.com/r/f5JZrNtSGkHn and see if they ship to your Country.