What a dream of a garage. Great job & really shows off what is possible with some hard work & the OG shop. I can't wait to tour it when finished, i hope you do make it out for the finale.
These are my favorite videos haha it’s like a low key competition between these two, but the great part about it is that they work together and help each other out.
Not as familiar with PREVOST equipment, but 3 things typically: 1) Filter/Regulators, to my knowledge, need to be mounted horizontally for the filter portion to operator properly 2) Regulators are directional, typically left to right (inlet > outlet) and 3) Those "little adapters" are likely to make the air prep unit expandable (additional filter levels, mist separator, soft start, emergency air dump, pressure switch takeoff port, etc etc). Hope this helps!
I loved this, i want it for myself! I can't wait for the day Matt uploads a video titled, Starting my dream garage part 1. It's going to be so awesome.
This is a great space. I think the only changes I would have made is polished or epoxy concrete and then a 2 post lift unless a scissor can be found that goes higher.
He's commented in the past that he would love to have RR Buildings build him a building (that's a lot of "build".) Probelm is RR has said in the past that he won't build outside of whatever state he's in. He made a special exception for Diresta.
Really? Maybe I missed it. Makes sense from RR's part as it would suck being away from home for weeks on end. But I'd like to see them meet up. I could see some equal value exchange happen.
Did he do any kind of treatment to the concrete floors? I'm going back and forth between the million different types but this building is so well thought out I'd be interested in hearing his thoughts.
I love the garadge .and products..im thinking about building a morton garadge similar but im in fl. I do not need heat..but il go with cold air ..mini splits units..but for my car lift im going with a in ground 2 post globe fs-28..air over oil..low pressure..its also a clean look..il do a boom for car washing in one bay..but im doing a hot rod type setting with a bar ..kitchen lounge theme..love the vac system ..im going with a 5thou pressure concert do to my lift im getting it about 8 thousand. From svi inc. In dekelb il.plus the install cost same type of air comp ...80 gl.2 stage..but i love how this guy built it..again im in cental fl. Near dade city..fl.im looking to bye about 5 acres..for my new home and hobby garadge..
Obsessed Garage when he started spouting off pounds per square inch I figured engineer. I do some REI stuff too, need to come to an OG event and meet this guy.
It's nice garage but had be an expensive one for just detailing cars this garage had to cost at 30 or 40 thousand dollars just to build it's a purchase to think about a lot of debt for sure but very garage
I think he mentioned in the first video it was $122k to build and I don’t think that includes some of the cool stuff like the lift, big ass fans, air compressor & dryer, washer/dryer combo etc...
9:27 [I’ll be that guy] this is not on OG’s level, this is commonplace, Joe-blow afterthought MacGyver. And the Swisstrax being “darn near flat” at 8:55 is substandard. Sure, I can’t afford the guy’s garage, but that doesn’t mean I need to fawn over it. He’s a rich dude, living the rich dude lifestyle... he’s just not truly obsessed.
I don't man...you might want to rethink this. How do you think Nick has the means to do this stuff? It because he is smart, worked hard early in life, and has taken significant risk. His garage is really, really good and something to aspire to create.
boobacockaa FYI I’ve spent many many hours of manual labor along side the owner on this garage build. There were a lot of subcontractors for the main scopes, but the only way to get this dialed is to do it yourself. As well as the laundry. Cheers.
Man this guy's garage is just amazing. I can't get over it
Any updated videos on this space? Would love to see finished product!!!
21:23 "I thought about it for longer than it took me to hook em up" - that's the key to this whole project
This whole garage is so well thought out and executed. Outstanding job!!
I think about this garage more than a healthy amount. Well thought out and even better executed.
This place is awesome. Dialed in so many ways
this is awesome! also, this dude loves pulling the triggers on the air hoses! lol, love it!
What a dream of a garage. Great job & really shows off what is possible with some hard work & the OG shop. I can't wait to tour it when finished, i hope you do make it out for the finale.
These are my favorite videos haha it’s like a low key competition between these two, but the great part about it is that they work together and help each other out.
Wow! I love that lift! I’ve got a Rotary 2 post HD that takes up a ton of room. Amazing how flush and out of the way these are when down in the floor.
Not as familiar with PREVOST equipment, but 3 things typically: 1) Filter/Regulators, to my knowledge, need to be mounted horizontally for the filter portion to operator properly 2) Regulators are directional, typically left to right (inlet > outlet) and 3) Those "little adapters" are likely to make the air prep unit expandable (additional filter levels, mist separator, soft start, emergency air dump, pressure switch takeoff port, etc etc). Hope this helps!
I loved this, i want it for myself! I can't wait for the day Matt uploads a video titled, Starting my dream garage part 1. It's going to be so awesome.
Damn, I need a garage like that! Nice Mercedes too there!
PS: The white balance on this one is 👌
Those regulator/filter combos should be mounted vertical so they can be drained and any collected moisture doesn't back feed in the inlet side.
That is an AMG GTS. Not a GTR like Matt mentioned this morning. $100,000 difference between the two.
I mean what is a 100 grand to us mere mortals... ! Lol
Dream garage! Did they run the Jenny through stainless, into regulator, through prevost and then into Copper piping that goes throughout the building?
This is a great space. I think the only changes I would have made is polished or epoxy concrete and then a 2 post lift unless a scissor can be found that goes higher.
Have you seen RRbuilding's channel? He builds these types of structures. You guys should meet.
He's commented in the past that he would love to have RR Buildings build him a building (that's a lot of "build".) Probelm is RR has said in the past that he won't build outside of whatever state he's in. He made a special exception for Diresta.
Really? Maybe I missed it. Makes sense from RR's part as it would suck being away from home for weeks on end. But I'd like to see them meet up. I could see some equal value exchange happen.
I've watched him. He is in Illinois, so that doesn't help much.
@@ObsessedGarage Hes been up in NY and done some work before just FYI ;)
In the present day scheme of things its refreshing to watch men care about things like the outcome matters.
2nd floor loft would be killer in this building, man cave all in one!
Get a short hose for the boom pole then put the kobrajet hose in the hose reel for outside washing
That is one sweet garage.
Basically my dream garage.
This video was fantastic! Anymore update of this garage or even more so your planned garage?
Next time I'm out in Denver, I'll get an update.
@obsessed garage Does he have any social media or a channel?
@@ObsessedGarageDoes he have a channel or any social media to follow?
Update on finished building?! Does Nick have a channel; love the shop; watched both videos on the shop more than a handful of times; thank you
He doesn't. I stop in next time I'm in Denver.
Need the final.
Did he do any kind of treatment to the concrete floors? I'm going back and forth between the million different types but this building is so well thought out I'd be interested in hearing his thoughts.
He mentioned swisstrax once the driveway was completed.
What manufacture of the Central Vacuum is that? I am thinking about putting in a Riccar Rental vac in my garage
Modern Day and Hide-a-Hose
one obsessive to another these guys do make me chuckle :-)
@obsessedgarage when are the HRE's coming for the m3?
I need to get down there to get them. They are at PSI.
You can tell he’s a fan of the OG videos when the words Stout and Janky are used. 😁
Ha, ha... I'm influencing the doucheyness everywhere.
Wow - just wow. My OG is much less OG, but I think this has pushed me to want to pipe air around.
I love the garadge .and products..im thinking about building a morton garadge similar but im in fl. I do not need heat..but il go with cold air ..mini splits units..but for my car lift im going with a in ground 2 post globe fs-28..air over oil..low pressure..its also a clean look..il do a boom for car washing in one bay..but im doing a hot rod type setting with a bar ..kitchen lounge theme..love the vac system ..im going with a 5thou pressure concert do to my lift im getting it about 8 thousand. From svi inc. In dekelb il.plus the install cost same type of air comp ...80 gl.2 stage..but i love how this guy built it..again im in cental fl. Near dade city..fl.im looking to bye about 5 acres..for my new home and hobby garadge..
Does this nick guy make youtube videos? I'd like to see more of this garage
Where is the sink from
Nice set up👌
Damn, Rex is everywhere
Some day... 🏎
I think if I had a garage like this I’d just live in it and not need a house :)
Can you tell me the dimensions of this shop please?
What line of work is Nick in? Awesome build!
He is an engineer and real estate investor.
Obsessed Garage when he started spouting off pounds per square inch I figured engineer. I do some REI stuff too, need to come to an OG event and meet this guy.
What brand ceiling fan is in the shop please and thank you?
Big Ass Fan
That is a lot of springs per door wow.. Why so many?
Door weighs more than a normal garage door
@@Ohjustyoshi yeah obviously. I have commercial doors with large springs, two per door. Just seems unusual to see 4 per door.
i noticed that too
chucko83 18’x10’ doors. Plus two have the high lift option which matches the slope of the ceiling requiring more spring force.
What vacuum set up is he running?
Epic garage. I love the look of swisstrax but how do you really clean up under them leaf blower is only going to do so much.
Vacuum
Where do i get that ss air hose?
He's like a skinnier, cooler version of Parker from Vehicle Virgins
Who makes the overhead door opener?
It's a LiftMaster 8500.
What type of roof is on this garage?
I think it's a metal Gable roof.
Definitely my dream garage. Only curious as to why he will be doing heated floors and putting swisstrax on top of them ?
Nathan Kinner the radiant floor will still heat the space through the Swiss trax.
What does nick do for a living this garage is insane!!
He's and engineer and real estate investor.
Man I need to make more money so i can get my dream garage!
It's nice garage but had be an expensive one for just detailing cars this garage had to cost at 30 or 40 thousand dollars just to build it's a purchase to think about a lot of debt for sure but very garage
Detailing? It's a garage where Nick will do all kinds of stuff. You generally don't build something like this by taking out loans.
I think he mentioned in the first video it was $122k to build and I don’t think that includes some of the cool stuff like the lift, big ass fans, air compressor & dryer, washer/dryer combo etc...
Power socket so close to the sink.
All breakers are GFCI, so it will be fine.
the noise that lift makes going down is horrific.
9:27 [I’ll be that guy] this is not on OG’s level, this is commonplace, Joe-blow afterthought MacGyver. And the Swisstrax being “darn near flat” at 8:55 is substandard. Sure, I can’t afford the guy’s garage, but that doesn’t mean I need to fawn over it. He’s a rich dude, living the rich dude lifestyle... he’s just not truly obsessed.
I don't man...you might want to rethink this. How do you think Nick has the means to do this stuff? It because he is smart, worked hard early in life, and has taken significant risk. His garage is really, really good and something to aspire to create.
So he built a $100k car wash with an attached closet gym. Wonder what his neighbor with the tractor thinks about him? He's gonna smudge his Pumas...
How much was the washer/dryer combo, $2100. "Not bad". HA!
you can throw any ridiculous amount of money out there and it's always "Not bad that's reasonable" haha
lol it is a pretty nice unit but for $2100? and just to wash towels? jesus
Those purple wheels are hideous.
This is someone's private garage, not a commercial premises then?!!
Correct
Wow!
First
Is that how rich people close washing machine doors? Just kidding, but seriously, that guy has never done laundry in his life.
chucko83 ..... I suspect he’s never done any manual labor whatsoever. But if he does all his heavy lifting with his brain-meat, he doesn’t have to.
@@boobacockaa it's interesting to see and identify.
😂😂😂
boobacockaa FYI I’ve spent many many hours of manual labor along side the owner on this garage build. There were a lot of subcontractors for the main scopes, but the only way to get this dialed is to do it yourself. As well as the laundry. Cheers.
You guys are acting like this guy is bill gates or something lol...