ฝัง
- เผยแพร่เมื่อ 10 ก.ย. 2024
- The video demonstrates the process of changing the engine oil and filter for the following Toyota Corolla models with a 1.8L 4-cylinder (2ZR-FE) engine.
2009 Toyota Corolla
2010 Toyota Corolla
2011 Toyota Corolla
2012 Toyota Corolla
2013 Toyota Corolla
Changing the oil is basic maintenance, but it's crucial for your car's engine if you want it to last a long time. You should change the oil every six months or 6,000 miles even if you are using full synthetic oil. With the right tools and safety measures, you can perform the oil change at home. This will help you save money and allow you to do the task at your convenience, rather than waiting for extended periods at an auto shop.
#toyota #corolla #oilchange #automaintenance
Parts and Tools required:
- 14 mm socket
- 3/8 Ratchet
- MotivXTools (MX2320) Oil Filter Wrench (amzn.to/46FQl8O)
Product info from MotivXToools
www.motivxtool...
- Carquest Premium Oil Filter from Advanced Auto Parts (Part # 84064)
- Toyota corolla Oil Drain plug gasket
- Mobil 1 Full Synthetic Oil (SAE 5W-20 or SAE 0W-20)
- Rhino Ramps
- Wheel Chock - (amzn.to/3SFINx2)
- FloTool funnel - (amzn.to/4deRcj4)
Disclaimer:
The information provided in this video and description is for informational purposes only. Please use your judgment and proceed at your own risk. The author or publisher of the video assumes no liability for any damage or injury caused by following the information provided. Please remember that when working on any DIY project, you bear all the risks alone. Seek professional assistance if you are uncertain about your ability to perform the work.
MotivXTools (MX2320) Oil Filter Wrench>
amzn.to/46FQl8O
Great and thank you very much for your explanations. Practical and complete.Ciao.
@murielleetjean-pierre6249 - Glad it was helpful!
Just a tip: replace the oil filter first then drain the pan. More oil tends to drip from the pan after oil filter is removed
Thanks for the tip!
Nice work! Boy that filter housing was over tightened! The spec is 18 lb-ft. Once I had to take a Corolla in because the housing was so tight that I thought I would break it.
Glad you liked the video! Thanks for the torque spec.