SHIMANO STELLA 5000sw Full tear down service & maintenance

Welcome back & thanks for watching
1 of 2 Stellas im servicing
Well used & overdue service needed
Water intuition from the side cover affecting the reels integrity
Requires full bearing kit, had 1 replacement bearing to complete footage but full kit still required for the little beauty
H Keeping it Reel

[@BryceMarchetto]

I have a 2023 Stella 5000xg sw and it cranks backwards allot when fishing, it seems the anti reverse is slipping. What do I look for when looking at the anti reverse? Or should I look at any other part?

[@hkeepingitreel7441]

That's more than likely your anti reverse bearing
Make sure no grease or oil on it, clean up, & test, otherwise might need replacing anti reverse bearing

[@kawengyu4952]

Hi, I followed your step, after reassemble, my reel spin in both ways. May I ask how can I fix it?

[@hkeepingitreel7441]

This would more than likely be something to do with the one way bearing
I would remove the rotor down to the one way bearing, check and double check all parts are in correctly in order, open the schematics to cross check each process
Make sure there is no oil or grease on the one way bearing, this will also cause the bearing to slip
Hope this helps

[@ShorrockPaul]

Great video!! After degreasing that rusted bearing if you had soaked in oil am sure would have spun ok but as it turns out you had a spare anyway. I have the newer Stella SW with composite one way bearing, some people prefer the older metal one but i like the ease of the newer composite one...no dropping disasters :)

[@hkeepingitreel7441]

@ShorrockPaul thanks mate, your welcome 👍
Was going to soak in wd40 but being a stella better off replacing

[@happyfisho8152]

As always you make it look easy 👌 great video and step by step detailed footage
Thanks mate keep up the great work 👍

[@hkeepingitreel7441]

Thanks mate
Much appreciated

[@ShorrockPaul]

There are two dimples on the rotor face, any idea what those are for. can see them at 33:13 at the 3 to 4 O'clock position

[@hkeepingitreel7441]

@ShorrockPaul I'm not sure if your talking about the rotor nut cover screw holes, other then that I can see anything else

[@peterrowlands1111]

Great vid mate. What's that tool you're spinning the bearings on? Been looking for something like that.

[@hkeepingitreel7441]

Thanks mate
It's a testing and measuring tool for rc bearing, great to use, you can find them online ebay or rc hobby shops etc
Search Rc bearing tool

[@peterrowlands1111]

Shot bro 👍

[@stripersniper1531]

I can tell you’ve done a few of these mate …nice

[@hkeepingitreel7441]

Started a couple of years ago opening reels, first stella was extremely nervous but really enjoyed it