ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
TOO EASY of a Fix!
ฝัง
- เผยแพร่เมื่อ 16 ส.ค. 2024
- In today's video we're finally able to get rid of that ANNOYING throw-out bearing noise. It has been there since I bought the car, and with a little help from adjusting the clutch, the noise is gone! Thanks for watching!
Link to Article: www.corral.net/...
NEW VIDEOS EVERY TUESDAY AND SATURDAY!
FOLLOW ME ON SOCIAL MEDIA:
Instagram: / ozomeromann
Snapchat: @Ozomeromann
Dude I was sooo close to just getting my clutch replaced I had the appointment booked and everything but saw this video last minute and it fixed my problem in 60 sec thanks
I was going to do a complete clutch, this weekend. Thanks, for saving me the time! I had to pull up on my pedal, push the tab, push the clutch a little, pull it up, push the tab, and then it clicked. I was pushing the tab pretty hard, at first... and it wouldn't click.
Brilliant, I forgot about that. Mine's still a little chirpy but way better, and shifts easier. I had to grab the pedal and the quadrant to get it to move one notch. My manual says to pull up on the clutch pedal but that wasn't enough to get it to click.
Also a little oil poured into the cable at the top works wonders if you need it. (You have to disconnect the cable to oil it.) And making sure the cable is routed through the guide loop/hook near the motor mount.
Hey buddy i just bought my 04 mach 1 last month i did the gas pedal zip tie mod and wow!! I had this same noise on mines and just did this trick and good to go. Thanks buddy for the time you take to help others!
My clutch petal has play like that but I can’t seem to get that thing to push in.
Finally found a Mach1 youtuber. 👍 definitely gonna subscribe
Adrian Mach1 Heck yeah! Thanks man, I appreciate your support! 👊💪
Adrian Mach1 💪
Steeda makes a nice Quadrant and firewall adjuster kit. Way better than the stock stuff with more flexibility.
so my car used to do a cricket sound when the clutch wasn't engaged, I thought it was the trow out bearing but it squeezed because it had no grease where the clutch fork and pivot bearing connected,only $5
The sound is so annoying, luckily the fix is so cheap and easy to do. In my case, adjusting the clutch was all it needed and didn't have to grease anything haha.
Where’s the clutch fork & pivot bearing?
in the trans
@@ceasznutz2 crawl under remove dust cover were clutch cable atcach to clutch fork look up n there with flash lite follow clutch fork up to throw out bearing get u a oil squirter put on end of it fish tank air hose if hose not stiff enough tape it to small stick run end of hose to top of throw out bearing were u can squirt little n it will run down do that on both sides of fork little on Shaft it slides on also fork has pivet point dribble some on it to replace little dust cover repeat ever six months or so
Hey wasup bro,happy new years.
How hard you suppose to press that hook?
I had tried but nothing happen,
no click or nothing,it wont moved.
Unles someone like the prior owner did it already and thats why its not moving no more.
To reset quadrant place top of foot under clutch pladdle n lift up if quadrant is sat it will click then clutch will catch rite off floor also takes pressure off throw out bearing for oiling then I use hammer handle that is rubberized to press quadrant need to press quadrant n lift up on clutch paddle it will go click to many clicks will make clutch slip reset start over one click at a time try it if not one more click ??
I tryed to push mine but it didn’t do anything and I didn’t want to break it but I put. A good amount of pressure also
apparently theres a little lever on the back side of where he was pushing to adjust it?
@@Josiah_Richardsmine only had that plastic piece nothing behind it.. pressed it for 10 minutes and got nothing
Does this work for 02 gt?
Mine makes this ticking noise ugh. I'm definitely going to mess with this. I've broken two cables and now this third one seems fine but now it's making that sound. I also think they stretch over time and they may just need snugged up a bit. I make a point to snug it up evey oil change if i can remember and also take it off alnd lubricate it. You can pull back on the clutch fork a little and tighten the nuts to make it slightly tighter. I also saw a guy put a spring over the cable to keep the fork pushed back? Just some fiddling around with the tension is all it needs. Got it.
Mine makes a ticking noise too!
There actually a little lever on the back side of where hes telling you to push it. I broke the little clip and felt around a bit and noticed there was an adjustable thing of the back to adjust the clutch height
i tried pushing it but it still wouldn’t move down
@@chrisj2308 try pushing the cluck pedal with one hand while holding the plastic thing with the other. Mine had to click 3 times before it was fixed
@@zanegrattan6637 is this only mustangs or any other car with a manual trans?
@@146gods if it has a ratcheting quadrant It should work the same, i would think. Try it and let us know what happens.
Wow man I’ve hated that sound & I’ve done it some gonna gonna try to adjust it at the fork maybe but that’s cool to see the original quadrant
Been wAtching for a awhile
4:43 when you showed the after, I hear a ticking noise, is that an exhaust leak or the throwout bearing? I assume you fixed the throwout bearing noise but you might have had an exhaust leak.
I take it this doesn't apply to a 16 mustang gt? Sorry if this is a stupid question, but I don't have any quadrant adjustments.
What if you can't get it to click? I've moved the pedal up and down multiple times. I cannot get the quadrant to budge or click.
Took me a very long time but you just need repetitively press it down and it will eventually click. I had the same issues with mine where i just tried pushing it down but it wouldn't click
Another great vid. Your going places soon big I'm sure 👍
Steve Pearce Thanks man! I appreciate ya! 👊
OMFG DUDE YOU JUST SAVED ME SOME $$CASH$$ MINE GOT SO BAD I WAS READY TO REPLACE MINE AND PUSHED ON THE PLASTIC HOOK AND BOOM LIKE A BRAND NEW CLUTCH...YOUR THE MAN FOR POSTING THIS VID JUST SUBSCRIBED
🤟😎
I tried it idk if I’m weak as shit or what but that shit is tough as fuck to push down
Did u ever figure it out?
@@LuisAlberto-fg8db lol damn, five years ago man, if I remember correctly it was my throwout bearing, I just ended up getting it replaced. Had to drop the transmission and what not put a new clutch in there as well Cuz I had a whole bitch down so I might as well.
Got this problem going on in my gt…. I’ll let you know results soon
Tried for 10 minutes and no click… my hook seem likes is like an inch or inch and a half off the metal piece so basically just moving the clutch pedal up?? I have a 03 GT is it different?
Hey bro thanks for the info it work on mines but I had to do 3 clicks to fully quiet it down you think that was to much?
How much pressure did you have to apply? Don’t want to break anything😂
My 2003 v6 doesn’t have that it has a knob near there but twisting it does nothing
So mine makes a hard clank in neutral I doubt this will fix but worth a shot before I buy a new clutch 😭
I pushed on mine and the little white clip broke 😢. Now what? lol
Is this only on Mach 1 or on gt too?
Update it clicked( I think) but still squeaks. Should I try again?
Nooo wayyyyy dude thank you so much this fixed it
Ill try it on my mustang too see if it works
Eduardo Diaz Definitely try it out and let me know how it goes! 👍 Worked great for me.
Dude I put a Steeda firewall quadrant in and firewall adjuster and I still get noises
The plastic hook broke while trying this is their another way to do it even though it broke or another thing I can do
I subbed at 154 love your videos man. Keep up the great work.
SilentDrifter7 That’s awesome man! I really appreciate your support!! Ive got a lot of good stuff coming in the works! 👍
ok, so you push it down to hear a click.
can you pull it up to undo it?
In the owner’s manual it actually tells you to do that every so many miles. Sub
Any car or just mustangs?
Cool video man! Just walked out to my 03 mach and she purs just right now! One question tho.. have you had to re do this since you did it?
Yeah man! About 2 months later it kinda fell loose and had to do it again 😂 haven’t had a problem since.
Ozomeroman haha that's great. Well this is awesome keep up the great budget videos. Did you ever find an led headlight bulb that matches the white side lights?
Yep! I just put in some retrofit projectors on the headlights. They work awesome!
cool video but mine is super tuff it wont click I don't want to break it
@@ndriverkg104 did you ever fix it
Do you still have the SLP and O/R X pipe?
I'm still having some trouble with this
I’m having the same noise but I can’t get mine to click.
did you ever figure it out?
Thank gou carlos ! It worked for me )!!!!
I cant find the quadrant on my 2006 legacy gt
Permanant or temporary fix?
Damn I didn't know this I watched this a week too late I had yo replace the whole clutch kit.
lui 1228 dang dude 😂 but hey, at least you have a new clutch to bang gears through! 👍
Ozomeroman yes sir👍🏽but first have to go through the boring Break in period
What area are you from trying to see if Chris sipple from another Mustang Channel on TH-cam is able to do a review of your cars he's interested just needs to know what area you're from so it could be possible if you're interested gave you his channel take it from there if interested would be cool
Justin Fahnestock That would be awesome man! I’m originally from Dallas, Texas but moved to some weird random random state on the west coast temporarily so I doubt he’d be in the area haha. I’ll be going to Mustang Week next year and have some trips planned so maybe we could plan something then. Would love to have a review of my Mach! Haha
CHRIS SIPPLE is his channel check him out I already told him about you he's interested just thought it would be cool even if it doesn't work out maybe you two could meet at Mustang week or something you're welcome bro
Hold up Carlos I'll be back. I'm going to this right now!
This work on 98 cobra
😂😂😂😂😂 That was a funny start.
Seen this video and fixed mine at 130 am🤣🤣
Odd question for a car channel but what product do you use for your hair?
Haha! No problem! I use the Johnny B. Mode Gel, works great!
I tried it and didn’t work
same here, did you ever figure it out?
i hear it......know it well.....
how does this fix make logical sense?