I just came across your video as I just bought a Champion splitter. Your ingenuity is great and your fabrication skills are top notch. You've given me some great ideas for my new splitter.👍
Thank you scooter glad you liked it. I did have to re design the slide that runs on top of the i beam. I tried to lift a 2 1/2 foot 16 inch long round and the tubing bent letting it pop out. My Fix was to use 1/2 inch By 2 1/2 inch wide plate a 5/8 inch 10 in long square head bolt instead of the tubing. I then welded 2 5/16 pieces of keystock that runs along each side of the i beam and cut 2 pieces of the flat that would travel under top i beam keeping it from being able to raise up, the four 5/16 pieces work perfect because the flat top on the i beam is 1/4" so there is a slight clearance. Good luck if you build one not that hard feel free to call with questions.
Howdy Mr. Morris. As many already mentioned, great job on the mod and thanks for taking time to share. I'm just a couple years behind you in age so I also feel the pains of lifting and really like your set up. Many others have already asked about the "how does the table stay up" thing and I guess I lack the imagination to follow the spring, tube, latch verbal explanation. If you had time it would be great to make a video of just how that works. I currently split maybe 5 chord for myself per year but my neighbor is 85 this year and he splits at least that much so I am always there helping him haul, buck, split and stack his wood. Anyway, if you feel up to it and could make a video on the table mechanism I think you'd have a bunch of others that would really appreciate your time and wit. Thanks in advance!
Zig Zag if you want I will do a video up close on it and send it to you in a text message if that is alright with you. My cell is 337 351 6542 if you want to contact me with any questions I will be glad to help.
Well done William. You have solved the top issues with log splitters. My question to log splitter manufacturers is why not design and sell similar upgrades. These great value additions would make life so much easier for anyone at any age. My second point is the added value of protecting the engine and hydraulics, these are real issues. William not sure if there is some engineering in your background or just a lifetime of experience getting in the garage to make stuff work better. Either way congrats. What I would love to see is a follow up video with a closer look at how you designed each component. You video certainly passed the functionality test….but selfishly I want to add your modifications to my splitter. My compliments.
I've started shopping for a log splitter. This video is enlightening. The covers for protection of the engine and hydraulics is great advice. The log lift and return limiter are ingenious.
Thank you Zoltan for the compliment It really did come out pretty good. It has worked out great for me with my bad back. Cuts out any lifting my back likes that. It isn't hard to build if you can weld a little not to much to buy. The pillow block bearings $14.00 on Amazon and the four 5/8 inch spacers with lock Allen screws I butted 2 spacers together close to each bearing so I could weld the round rods from the spacers to the bottom of the table and a 2 foot piece of I/8 inch cable is all I had to buy I had the angle iron for the frame and the aluminum table I had from an old scraped wheel chair ramp but you could use 3/4 inch treated plywood. I had enough 5/8 inch round stock to make the ram limiter. I chose the Champion mostly because of all the good reviews and I called champion and talked to the plant Foreman he answered all my questions nice people at Champion. Also it was on sale. Hope this helps in your splitter hunt. If you have any questions email me and I will try to answer them. William Morris
Thanks Andy for your comment. If you have a friend that can weld a little bit you probably could build if with a little help from someone. It's not really complicated 12 feet of 1 inch angle iron. and 40 inches of 5/8 inch of round stock 5ft. of 1/8x 2 inch x 1//8 thick flat stock. 2 pillow block 5/8 in hole self aligning from amazon about $15.00 dollars. 4ft of 1/2 inch all thread rod 8 1/2 in 8 nuts and instead of aluminum wheel chair ramp for the table use 5/8 in treated plywood.
Thank you for sharing this. I have the same splitter and was trying to figure out a way to keep the ram from going all the way back to the cylinder. That extra 5 seconds per cut saves a lot of time in the long run. Great fabricating!!!
Simplest thing that can be done with all splitters is put blocks between the base and the wood to close the gap between the splitter head and wood piece. Reduces travel, engages right away, shorter return. Some splitters have a ram on the hydraulic cylinder and push the wood into the splitter, and you would put a block between the ram and the wood. I'm looking at picking one of these up. Have been using an small electric splitter and have a long and short block, like a piece of 2x4, and a 4x4 sideways, or a knarly small end cut off fiewood.
I just seen your video William, great design and well thought out improvements, I would be interested in seeing more of the table design and hydraulic limiter up close to see what parts were used, keep up the good work and great job, I am picking up one of those splitters this week
Donm if you text me or send me your phone number so i can text you pictures i will be glad to do so if you would like to talk about how and why i did something just give me a call be glad to talk to you. I will be out of town until Thursday the 14th call Thursday and i will be available. I am retired usually home.
Brilliant stuff Mr. Morris. Adding a powered log lift without adding any extra hydraulics and the ensuing💲modification chain needed to integrate it all.
Real nice, multifunction design. Very inspirational and can add a few more log splitting years to my back. I would love to see a parts list especially for pivot point and the Ram to Table engagement mechanism.
I do have pictures if you want them just contact me by my e mail listed below the viewer numbers and i would be glad to text the pictures to you just provide me you number and i will send them to you. i have had problems sending the pictures using e mail but no problems texting if you have questions email me and i will send you my phone number and i can answer them over the phone if you need me to. Thanks William
Ok, great video. I've seen 3 videos to use but I'm now going to use your design. I'm going to rewatch it again . I missed how you locked the table up while splitting. Thanks for making your video. I'm headed to the scrap yard for parts.
@@williammorris622 Any chance you could post a picture of the table lock that keeps it up? It must work from under the rail to keep it away from bottom Incase you had to set it up right.
Nice job of saving your back and protecting the vulnerable machine components at the same time. I really like the return trip for different log lengths (saves time) think I’ll do that to mine soon. Thanks for posting!
Man! I am impressed with that table! Did you ever make a close up video of its inner workings? I have the 27 ton champion and want to do what you have done with mine. Thanks so much!
Great job inventing the wheel, I don't have a log splitter but I do have a bad back, in the near future I will be picking one up, and hope to do this mod that you did to yours, I see in the comments, you have some pictures you might be able to send. I love the way your table drops down and picks up. Also the way your protecting all of the equipment. You did a really great job, I love doing stuff like this. It's good for the mind
Thanks for the kind words you might be right but what I like the most Orion is it saves my back and all the bending over lifting and dragging rounds over to the splitter.
The log lift is easily worth another few thousand dollars on a new machine. Great idea and well thought out build. I will need to add this top list list
On the lift table is there some kind of pin you pull to disconnect the lift table, You did not show this. I saw you pull something and you talked about a trip ? I hope you show this again. I have the 27 ton Champion. I think this is Great. I would like to make this for mine, Thanks for sharing.
Cesar thanks for the comment. Looked at all the splitters across the internet and TH-cam checking the reviews Champion was at or near the top with people that have used it for several years on the reviews. I also called Champion and the employees were very nice. They answered the questions I had. They transferred me to the engineering dept. where I got the rest of my questions answered. Champion's warranty was at the top of the splitters reviewed. They also don't use automated phone service you call you talk to a Champion employee.HUGE+ There is a Australian company that builds the best Splitter I saw anywhere but the price is 5 times the price of the Champion. And add another $800.00 dollars shipping on top of that no way to justify that.
@@williammorris622 It's only my experience William and I am sure they have one off's that fail. I've had my 25 ton in the shop twice for over 3 months each time due to failures and parts not being available. The ram has been replaced once and the hydraulics were fixed another so it's been in the shop almost as half the time I have owned it. This is only my experience but I cannot recommend this product to anyone.
@@williammorris622 I've had it for 2 years. The first time it stopped working was at 6 months. The second time was around 1 1/2. I worked with Champion and they have amazing reps. I'm selling my champion and getting a Wolfe Ridge. Its about to arrive... I hope you have a great day and thank you for the great video. Good luck with that splitter.
Thanks Fldavestone I did have to beef up the table lifter I bent the pipe that operates the lifting of the table. I don't usually have big rounds to split but i had a Red Oak tree that was hit by lightning and it was dying and my grandson and i took it down . it had 2 and 1/2 foot rounds at 16 inches after cutting the tree up they weighed about 250 lbs or a little bit more. I replaced the travel lifter on the I beam to 3/16 inch thick and used a 5/8 inch rod welded to the travel lifter problem solved.
I have the 27 ton model, really like your lift table for the logs. Great idea. Your yellow side shelf on the side you stand is on wrong. It should be more flat to be more of a shelf, but if you like the fall protection I'd keep as is.
I had removed the big rack where the table is now I started to put in on the other side but it kept me a little too far out not as comfortable as the short one. Short one is turned up enough to keep larger rounds for going off toward me. Thanks for posting your comment Cody.
I wouldn't be surprised if this becomes a new standard because you added the lift table without adding hydraulics like most currently do. I have the same concerns about back injury but I also like the big electric splitters that cut both directions but unfortunately then have no lift. Those were the exact tradeoffs but this work-around way gives you both.
That is what I have been looking for. Mine is a 27 ton Champion bought in 2019, but I was trying to rig something to keep the motor and the fenders on each wheel protected in the event a piece rolls off. This gives me some ideas on ways to fix it. Thanks.
Tom if you would like to find out more just e mail me and I will get back to you with a description on exactly how I built mine. kb5tgs@gmail.com Thank you Tom for watching my Video. I am not able to post another video right now for a while.
Genius way to lift the wood up, no need for more hydraulics. Would like to see more detail on how the table is connected, so I will email you at address you give below
David its a simple 2 piece tilt latch a 1 inch box tubing notched at the top to let the 3/4 tubing to go outward for the table to sit on. with a 3/4 inch inside the 1 inch with 1/4 inch a bolt through both in the center so it can toggle in or outward and a small coil spring between the 1 in and the 3/4 to push it outward. There is a 1/4 in rod with a 90 degree ell on one end that goes through the splitter I beam 3/4 box tubing just above the top of the 1 inch box tubing and the other straight end goes through the splitter I beam to pull the 3/4 box tubing back so the table will go down when you need to pick up more wood. Thanks for watching.
If you weren’t an engineer you missed your calling. Awesome job. Ditto on the requests to show more detail on how the table disconnects so it doesn’t go down with every additional split.
No the table only goes down when you pull the spring trip on the operator's side. When you lift a piece to split the spring trip latch snaps out as the bottom pushes the latch piece back and as soon as the bottom of the table passes trip latch it snaps out and you push splitting ram forward the table sits on the latch and stays level while you split the wood. Thanks Monkdad for the comment.
Yes it will tilt vertical with the table in place as i sat it back about an inch behind the foot for that purpose. The lines stay stationary only the splitter ram moves. Thank You Bill Morris
The table latch is just behind the front of the table about 3 inches and the latch release handle is operated on the operator side just behind the splitter foot. I drilled a 1/4 inch hole through the I beam and ran the rod through it to operate the trip lever. If you pause the video when I walk around to the operators side to operate the splitter you can see the brass pull knob trip. Also in the video just before I walk around the slitter and the splitter table is lowered to the ground where I am putting the wood on the foot pause it and you can see the table stop just behind the splitter foot. The flat cable slide is a 2 inch flat iron 1/8 inch thick that sticks over the I beam on each side. I mounted 2 pieces of Fiberglass round stock under the 2 inch flat metal on each side . I ground the side and top of the fiber glass round stock flat so it would bolt to flat iron on each side of the I beam. This lets it slides down the beam fine. The small pipe is welded to the flat iron and there is a sharpened to a point Small bolt that is welded to the bottom of the splitter head so it can pick the table back up when more wood is needed. .I attached the short piece 1/8 inch cable to the flat slide plate and to the top of the X brace for lifting the table back up. Hope the helps. If you need a picture email me and I will take a picture up and email it to you.If you enlarge to theater mode on my TH-cam video you can probably see it ok. Thank You William Morris
Michael the stop the table sits down on is located on the rigkt side nesr the foot of the splitter. If you are standing at the rear of the splitter the trip is on the right side just behind the foot attached to the channel iron. When the table raised the edge of the table pushes the trip back as it starts to get level and just as tye table passes the trip it pops out and when you go forward unless the handle is pulled to pull the trip backwards on the left side where the operator stands the table stays up resting on the trip lever or dog if you will.
Steven there is a trip latch that is located near the front on the splitter just behind the foot that the wood rest on when you pick ii up it pushes the latch lever back and when it passes it the spring pushes it under the table. When the split stroke starts forward the table sits on it and won't go down. When you need to load more wood on the foot pull the trip lever and the split stroke will let the table down. Thanks for watching the video.
Good mods but you're still doing it the hard way with that design of horizontal log splitter. Check out the Whitlands WS150 or the SuperX3100 log splitter for some ideas and about working a log splitter with a straight back. Once I used one I now never use anything else, makes splitting firewood easy.
Really nice splitter well made. But the Price of $7950 not counting shipping to USA is pretty steep. I have about $1440 in mine with the lift and ram limiter. I don't do commercial firewood selling just my own and our son's needs so I could not justify spending that amount of money on a splitter.the only thing I can see about Superaxe WS150 Log Splitter Made by Whitlands Engineering is having to push both handles down to operate the ram. When I am slitting small kindling for my offset smoker I can lay it down and split as thin of pieces as I want and that would not work on the Wetlands splitter. A person could make a cross handle for it and use one hand to operate both levers but you would still have to hold the small pieces upright by hand. But I really like the Whitlands splitter a well built good safe design. Thanks for the link to Wetlands website and thanks for the comments on my splitter. William
@@williammorris622 The SuperX3100 is single hand operation built for the home owner /small farm at about half that price of the WS150. They are Aussie dollar prices ( currently 65c A.U.D = $1 U.S.D). I know they do ship them to New Zealand but they do have a long waiting list as they are built to order. Just a few ideas for you, you don't see this Australian design wood splitter anywhere else.
Thank you Wallace It still works great after 2 years. I just split a cord of wood for my son a week ago and it is absolutely great for saving your back and faster splitting.
Its a simple spring assisted 3/4 inch box tubing inside a 1inch box tubing with a notch cut about 1/2 in deep 7/8 inch wide to let the 3/4 inch pivot as the table comes up it pushes the 3/4 box tubing back into the 1 inch and when the table gets level it pops out under the table so on the split stroke the table sits on the pivot and stays up.
Ed I did have to redesign the slide on the I beam I tried picking up a large round 16 inches long and 2.5 foot in diameter and the pipe bent and it jumped off. I don't usually have anything much over ten to 12 inches. So what i did was replace the 1/8" flat and ran a 1/2 inch plate across the top of the I beam and put one on each side under the top i beam plate and let it stick out about 2 inches on each side stooping just short of it dragging against the Vertical plate. i Used two 5/16" square steel key stock and welded it between the two flat plates on outer edge and another 5/16" key stock not quite touching the edge of the I beam leaving a slight clearance. i drilled two 5/16" holes through both 1/2 inch plates just behind the key stock and pulling the upper and lower pieces tight against the key stock. I then found a 5/8 inch bolt with a square head and welded it to the center of the 2 5/16 slide pieces and when the table goes down the cable from table to the slide lets the table follow it down put your log on the table foot and when it starts lifting the back side of the splitter head hits the bolt picking up the table and log so when the table reaches level the trip pops out and and wont let the table go down while you are slitting.
Roger I will be out of town until Thursday if you would like to call me I can explain on how I built it like did. But another brand or size splitter might be different. Cell # 337 351 8542
There is a spring latch just behind the foot of the splitter the opposite side of the main I beam. When the table comes up from the ground and right before it gets level if slides against the latch pushing it in and when it gets level the it clears the latch and it pops out then when the ram moves forward table sits down on the latch. when you want the table to go back down the operator pulls the handle on the operator side and hold it until the table starts down then you can release it while the table goes to the ground.
Jimmie I live in Opelousas. We are almost always around the house. If you get up this way email and come by I would show you my splitter and might throw in a cup of coffee👍
Louiegary I would be glad to send you pictures if you will tell me what part or parts of the table or splitter you need picts of. Please use my email to contact me that I have listed with the video' It would also be easier for me to send them to you by text instead of e mail. Be glad to send you my cell number and I can answer your questions over the phone. I have done that with others that have had questions. Thanks William Morris
I just came across your video as I just bought a Champion splitter. Your ingenuity is great and your fabrication skills are top notch. You've given me some great ideas for my new splitter.👍
Thank you scooter glad you liked it. I did have to re design the slide that runs on top of the i beam. I tried to lift a 2 1/2 foot 16 inch long round and the tubing bent letting it pop out. My Fix was to use 1/2 inch By 2 1/2 inch wide plate a 5/8 inch 10 in long square head bolt instead of the tubing. I then welded 2 5/16 pieces of keystock that runs along each side of the i beam and cut 2 pieces of the flat that would travel under top i beam keeping it from being able to raise up, the four 5/16 pieces work perfect because the flat top on the i beam is 1/4" so there is a slight clearance. Good luck if you build one not that hard feel free to call with questions.
Thanx for your video, and great fab work, peace from creel chihuahua mexico...
The modified platform is a smart one. You're truly a engineer!!!
Thanks for the kind words glad you liked it.
All very clever and well thought out modifications. Well done, and thanks for sharing.
Thanks JaciIIfor the comment.
We would love a follow-up video on your table design. This is a great help to many senior wood splitters.
Howdy Mr. Morris. As many already mentioned, great job on the mod and thanks for taking time to share. I'm just a couple years behind you in age so I also feel the pains of lifting and really like your set up. Many others have already asked about the "how does the table stay up" thing and I guess I lack the imagination to follow the spring, tube, latch verbal explanation. If you had time it would be great to make a video of just how that works. I currently split maybe 5 chord for myself per year but my neighbor is 85 this year and he splits at least that much so I am always there helping him haul, buck, split and stack his wood. Anyway, if you feel up to it and could make a video on the table mechanism I think you'd have a bunch of others that would really appreciate your time and wit. Thanks in advance!
Zig Zag if you want I will do a video up close on it and send it to you in a text message if that is alright with you. My cell is 337 351 6542 if you want to contact me with any questions I will be glad to help.
I have pictures with measurements on the table trip set up just let me know if you still want them. Email me
Well done William. You have solved the top issues with log splitters. My question to log splitter manufacturers is why not design and sell similar upgrades. These great value additions would make life so much easier for anyone at any age. My second point is the added value of protecting the engine and hydraulics, these are real issues. William not sure if there is some engineering in your background or just a lifetime of experience getting in the garage to make stuff work better. Either way congrats. What I would love to see is a follow up video with a closer look at how you designed each component. You video certainly passed the functionality test….but selfishly I want to add your modifications to my splitter. My compliments.
Yes. Me too
Seen a lot of modifications on youtube for Log Lift n Limiter, You done a great JOB!!! Thank you for sharing!
Thanks Nolin for the comments.
I like your ingenuity on every modification you did. I will definitely try to duplicate some on mine. Thanks
Thanks Mark you have any questions email me and I will explain what and why I did that on my Splitter. William Morris
I've started shopping for a log splitter. This video is enlightening. The covers for protection of the engine and hydraulics is great advice. The log lift and return limiter are ingenious.
Thank you Zoltan for the compliment It really did come out pretty good. It has worked out great for me with my bad back. Cuts out any lifting my back likes that. It isn't hard to build if you can weld a little not to much to buy. The pillow block bearings $14.00 on Amazon and the four 5/8 inch spacers with lock Allen screws I butted 2 spacers together close to each bearing so I could weld the round rods from the spacers to the bottom of the table and a 2 foot piece of I/8 inch cable is all I had to buy I had the angle iron for the frame and the aluminum table I had from an old scraped wheel chair ramp but you could use 3/4 inch treated plywood. I had enough 5/8 inch round stock to make the ram limiter. I chose the Champion mostly because of all the good reviews and I called champion and talked to the plant Foreman he answered all my questions nice people at Champion. Also it was on sale. Hope this helps in your splitter hunt. If you have any questions email me and I will try to answer them.
William Morris
@@williammorris622 Thanks for the details. It seems like a fairly easy modification with a lot of benefits.
I have a Champion 27 ton splitter. Thank you for sharing your modifications. Wish I had your skills to make the same modifications to my unit.
Thanks Andy for your comment. If you have a friend that can weld a little bit you probably could build if with a little help from someone. It's not really complicated 12 feet of 1 inch angle iron. and 40 inches of 5/8 inch of round stock 5ft. of 1/8x 2 inch x 1//8 thick flat stock. 2 pillow block 5/8 in hole self aligning from amazon about $15.00 dollars. 4ft of 1/2 inch all thread rod 8 1/2 in 8 nuts and instead of aluminum wheel chair ramp for the table use 5/8 in treated plywood.
As someone with a herniated disk that lift looks HEAVENLY will def be making one for my 37 ton splitter thank you very much!
Thank you for the comments.
That is just simply the best idea I have seen. Great work sir!!
Excellent work sir! You have a real knack for this stuff. Thank you for the ideas. Keep at it young man!
Thanks for the comment AB.
Thank you for watching.
You are brilliant sir! I have the 27 ton and you just really saved my back! Truly appreciate it.
Thank you Gunner for the comment glad you found this video helpful.
Thank you for sharing this. I have the same splitter and was trying to figure out a way to keep the ram from going all the way back to the cylinder. That extra 5 seconds per cut saves a lot of time in the long run. Great fabricating!!!
What is the adjustable red stop thing that trips the handle?
(Hope that makes sense)
Simplest thing that can be done with all splitters is put blocks between the base and the wood to close the gap between the splitter head and wood piece. Reduces travel, engages right away, shorter return. Some splitters have a ram on the hydraulic cylinder and push the wood into the splitter, and you would put a block between the ram and the wood. I'm looking at picking one of these up. Have been using an small electric splitter and have a long and short block, like a piece of 2x4, and a 4x4 sideways, or a knarly small end cut off fiewood.
I just seen your video William, great design and well thought out improvements, I would be interested in seeing more of the table design and hydraulic limiter up close to see what parts were used, keep up the good work and great job, I am picking up one of those splitters this week
Donm if you text me or send me your phone number so i can text you pictures i will be glad to do so if you would like to talk about how and why i did something just give me a call be glad to talk to you. I will be out of town until Thursday the 14th call Thursday and i will be available. I am retired usually home.
Brilliant stuff Mr. Morris. Adding a powered log lift without adding any extra hydraulics and the ensuing💲modification chain needed to integrate it all.
Very clever system, especially the table latch and the course limiter, brilliant!!
Thanks Thierry for the comment.
Real nice, multifunction design. Very inspirational and can add a few more log splitting years to my back. I would love to see a parts list especially for pivot point and the Ram to Table engagement mechanism.
I do have pictures if you want them just contact me by my e mail listed below the viewer numbers and i would be glad to text the pictures to you just provide me you number and i will send them to you. i have had problems sending the pictures using e mail but no problems texting if you have questions email me and i will send you my phone number and i can answer them over the phone if you need me to. Thanks William
Ok, great video. I've seen 3 videos to use but I'm now going to use your design. I'm going to rewatch it again . I missed how you locked the table up while splitting. Thanks for making your video. I'm headed to the scrap yard for parts.
Thanks Richard hope it helps you. if you have questions email me I will try to answer them.
@@williammorris622 Any chance you could post a picture of the table lock that keeps it up? It must work from under the rail to keep it away from bottom Incase you had to set it up right.
Richard E mail direct and I Will send you a couple of pictures and a description of how I built the trip.
Email me and I will send you a couple pictures back to your email.
Here's what I did: th-cam.com/video/Ism-CoyGxlw/w-d-xo.html
Great add on's to a wonderful tool to ease up on heavy work.
Thanks Sherri had fun putting together.
Nice job of saving your back and protecting the vulnerable machine components at the same time. I really like the return trip for different log lengths (saves time) think I’ll do that to mine soon. Thanks for posting!
Thank you Siskiyou I am glad you liked it. My old back loves it!
Woodsman its not hard at all the top of the tee trip is just getting it the right length
@@williammorris622 Yes I’ve already done it to mine. Have a shorts video showing it…thanks
One old man to another nice job.
Thank you Huzzunga.
Man! I am impressed with that table! Did you ever make a close up video of its inner workings? I have the 27 ton champion and want to do what you have done with mine. Thanks so much!
Thanks for the video. Like to see the ideas to make any work around the house easier on our bodies.
rlhanks thank you for your comment sorry I took so long to say thanks but I miss seeing your comment.
Great job inventing the wheel, I don't have a log splitter but I do have a bad back, in the near future I will be picking one up, and hope to do this mod that you did to yours, I see in the comments, you have some pictures you might be able to send. I love the way your table drops down and picks up. Also the way your protecting all of the equipment. You did a really great job, I love doing stuff like this. It's good for the mind
Thanks Nick for your comment on my splitter. When you get your splitter just get back in touch and i will be glad to help you.
@@williammorris622 ok sounds good, thank you so much. Have a great day
Those are GREAT ideas!! Well done!!!
Thanks Jason.
Oh man. That's sweet. That lift is a very cool modification. I wouldn't doubt that one of these companies copy something like it.
Thanks for the kind words you might be right but what I like the most Orion is it saves my back and all the bending over lifting and dragging rounds over to the splitter.
@@williammorris622 I bet. I may have to copy your design. I'll be getting the Champion within a month or so.
The log lift is easily worth another few thousand dollars on a new machine. Great idea and well thought out build. I will need to add this top list list
Thank you for watching Video and your nice comment.
Wow great mods. Impressed. Great video also!
Very nice modifications. The table is amazing.
Thank you James for the comment.
I am 74 too. Love the log lift modification.
Thanks Glad you enjoyed it.
Sir you did an OUTSTANDING innovating modifications 👍😇👌🍻
Thanks for watching an the reply.
Thank you RCAFpolarexpress for the comment.
Very nice. I really like the design.
Thanks for the complement Tom.
I really like your design of the log lift and how it works!
Thank You Dan for the comment glad you liked my video. It sure has save me a lot of wrestling and lifting logs.
Very nicely done Sir. Thank you for sharing your great ideas.
Thanks for watching.
Nice Work!! Thanks for sharing your design.
Thank you for the comment.
awesome mods, might just borrow a few of your ideas. Thanks for sharing
Yves hope you can find something that helps that is why I posted the video thanks for the comment.
On the lift table is there some kind of pin you pull to disconnect the lift table, You did not show this. I saw you pull something and you talked about a trip ? I hope you show this again. I have the 27 ton Champion. I think this is Great. I would like to make this for mine, Thanks for sharing.
Stanley send me a email and I will give you my cell number call me and I will explain how I made mine. Thanks
I don’t like champion splitters but the mods you made are spectacular! Well done!
Cesar thanks for the comment. Looked at all the splitters across the internet and TH-cam checking the reviews Champion was at or near the top with people that have used it for several years on the reviews. I also called Champion and the employees were very nice. They answered the questions I had. They transferred me to the engineering dept. where I got the rest of my questions answered. Champion's warranty was at the top of the splitters reviewed. They also don't use automated phone service you call you talk to a Champion employee.HUGE+ There is a Australian company that builds the best Splitter I saw anywhere but the price is 5 times the price of the Champion. And add another $800.00 dollars shipping on top of that no way to justify that.
@@williammorris622 It's only my experience William and I am sure they have one off's that fail. I've had my 25 ton in the shop twice for over 3 months each time due to failures and parts not being available. The ram has been replaced once and the hydraulics were fixed another so it's been in the shop almost as half the time I have owned it. This is only my experience but I cannot recommend this product to anyone.
I understand how long have you had your splitter Cesar?
@@williammorris622 I've had it for 2 years. The first time it stopped working was at 6 months. The second time was around 1 1/2. I worked with Champion and they have amazing reps. I'm selling my champion and getting a Wolfe Ridge. Its about to arrive... I hope you have a great day and thank you for the great video. Good luck with that splitter.
Thats genius thanks for the video, i would never thought of that.
Thank you for the comment.
Great job young man!🎉🎉🤩🤩
Thank You.
Still waiting on my splitter but you gave me some good ideas.
Thanks Fldavestone I did have to beef up the table lifter I bent the pipe that operates the lifting of the table. I don't usually have big rounds to split but i had a Red Oak tree that was hit by lightning and it was dying and my grandson and i took it down . it had 2 and 1/2 foot rounds at 16 inches after cutting the tree up they weighed about 250 lbs or a little bit more. I replaced the travel lifter on the I beam to 3/16 inch thick and used a 5/8 inch rod welded to the travel lifter problem solved.
Very nice! Sure takes the load off your back for sure!
Thanks Derp for the comment glad you liked it.
I have the 27 ton model, really like your lift table for the logs. Great idea. Your yellow side shelf on the side you stand is on wrong. It should be more flat to be more of a shelf, but if you like the fall protection I'd keep as is.
I had removed the big rack where the table is now I started to put in on the other side but it kept me a little too far out not as comfortable as the short one. Short one is turned up enough to keep larger rounds for going off toward me. Thanks for posting your comment Cody.
Love this setup, very well though out & thank you 😎
Thanks for the post and kind words.
Very well thought out and built . Thank you for sharing !!
Del thank you for watching the video and the reply just hope it helps someone wanting to build a side style lift table.
I wouldn't be surprised if this becomes a new standard because you added the lift table without adding hydraulics like most currently do. I have the same concerns about back injury but I also like the big electric splitters that cut both directions but unfortunately then have no lift. Those were the exact tradeoffs but this work-around way gives you both.
This is what you get when you need gains when you have pains and brains. Brilliant!
That is what I have been looking for. Mine is a 27 ton Champion bought in 2019, but I was trying to rig something to keep the motor and the fenders on each wheel protected in the event a piece rolls off. This gives me some ideas on ways to fix it. Thanks.
Dan glad it helped that's why I made it to help others.
This is genius. I'm sharing your video.
Thanks Goat669 For the comment.
Freaking genius. I love it! Good work sir!
Thanks for your comment I am glad you liked it.
Thank you sir. Can you please go over how you did the mods in another video?
Tom if you would like to find out more just e mail me and I will get back to you with a description on exactly how I built mine. kb5tgs@gmail.com Thank you Tom for watching my Video. I am not able to post another video right now for a while.
That is slick. Love the lift table.
Thank You Matthew for your comment.
Absolutely brilliant! Thanks for sharing!
Thank you Moselli.
People will definitely find this useful!
Thank You Kross.
How did you disconnect it from going down in each cycle.
Well Done
Genius way to lift the wood up, no need for more hydraulics. Would like to see more detail on how the table is connected, so I will email you at address you give below
Thanks for the commit. I will be glad to help you if you have any questions.
Love the design! I could not make out exactly how the lift table latches. Would love to add something like this to my wood splitter.
David its a simple 2 piece tilt latch a 1 inch box tubing notched at the top to let the 3/4 tubing to go outward for the table to sit on. with a 3/4 inch inside the 1 inch with 1/4 inch a bolt through both in the center so it can toggle in or outward and a small coil spring between the 1 in and the 3/4 to push it outward. There is a 1/4 in rod with a 90 degree ell on one end that goes through the splitter I beam 3/4 box tubing just above the top of the 1 inch box tubing and the other straight end goes through the splitter I beam to pull the 3/4 box tubing back so the table will go down when you need to pick up more wood. Thanks for watching.
If you weren’t an engineer you missed your calling. Awesome job. Ditto on the requests to show more detail on how the table disconnects so it doesn’t go down with every additional split.
No the table only goes down when you pull the spring trip on the operator's side. When you lift a piece to split the spring trip latch snaps out as the bottom pushes the latch piece back and as soon as the bottom of the table passes trip latch it snaps out and you push splitting ram forward the table sits on the latch and stays level while you split the wood. Thanks Monkdad for the comment.
I like your setup!!
Very nice build, thank you for sharing : )
Thank you for the complement.
Brilliant. The limiter I don’t need but the rest I MUST make happen. And I’m not that far from you. Thank you
Thanks SaltRock glad you liked it. If you want to see it send me a email and I would be glad to have you come over. William
Really cool log lift!
Thanks nick still works good.
Very nice modifications , i have the same splitter.
Thank you for watching.
Your modification were excellent,just wondering if it was the vertical position will your hoses clear?
Yes it will tilt vertical with the table in place as i sat it back about an inch behind the foot for that purpose. The lines stay stationary only the splitter ram moves. Thank You
Bill Morris
Very well done. Thank you for sharing
Neil thanks for the comment.
Can youake a part 2 and show how you lock the table in ,azning it wont tilt when you have wood on the table. Also how its mounted. Thank you.
The table latch is just behind the front of the table about 3 inches and the latch release handle is operated on the operator side just behind the splitter foot. I drilled a 1/4 inch hole through the I beam and ran the rod through it to operate the trip lever. If you pause the video when I walk around to the operators side to operate the splitter you can see the brass pull knob trip. Also in the video just before I walk around the slitter and the splitter table is lowered to the ground where I am putting the wood on the foot pause it and you can see the table stop just behind the splitter foot. The flat cable slide is a 2 inch flat iron 1/8 inch thick that sticks over the I beam on each side. I mounted 2 pieces of Fiberglass round stock under the 2 inch flat metal on each side . I ground the side and top of the fiber glass round stock flat so it would bolt to flat iron on each side of the I beam. This lets it slides down the beam fine. The small pipe is welded to the flat iron and there is a sharpened to a point Small bolt that is welded to the bottom of the splitter head so it can pick the table back up when more wood is needed. .I attached the short piece 1/8 inch cable to the flat slide plate and to the top of the X brace for lifting the table back up. Hope the helps. If you need a picture email me and I will take a picture up and email it to you.If you enlarge to theater mode on my TH-cam video you can probably see it ok.
Thank You
William Morris
@@williammorris622 thanks
Absolutely Genius 👍 💯 % ❤
Thanks for the comment jcnme2020
I know you said you had to engage the stop to stop the lift from going down. But I didn’t see how you did it from the video
Michael the stop the table sits down on is located on the rigkt side nesr the foot of the splitter. If you are standing at the rear of the splitter the trip is on the right side just behind the foot attached to the channel iron. When the table raised the edge of the table pushes the trip back as it starts to get level and just as tye table passes the trip it pops out and when you go forward unless the handle is pulled to pull the trip backwards on the left side where the operator stands the table stays up resting on the trip lever or dog if you will.
Very-nice! Good-job, SIR! Also...: I too wld like-to-see a vid, on tha 'lifting-table'. Thnx!
Thank you for the comment!
Once the wood is loaded up and your bring up, then what happens to?
Why doesn't the load go down?
Steven there is a trip latch that is located near the front on the splitter just behind the foot that the wood rest on when you pick ii up it pushes the latch lever back and when it passes it the spring pushes it under the table. When the split stroke starts forward the table sits on it and won't go down. When you need to load more wood on the foot pull the trip lever and the split stroke will let the table down. Thanks for watching the video.
Good mods but you're still doing it the hard way with that design of horizontal log splitter. Check out the Whitlands WS150 or the SuperX3100 log splitter for some ideas and about working a log splitter with a straight back. Once I used one I now never use anything else, makes splitting firewood easy.
Really nice splitter well made. But the Price of $7950 not counting shipping to USA is pretty steep. I have about $1440 in mine with the lift and ram limiter. I don't do commercial firewood selling just my own and our son's needs so I could not justify spending that amount of money on a splitter.the only thing I can see about Superaxe WS150 Log Splitter Made by Whitlands Engineering is having to push both handles down to operate the ram. When I am slitting small kindling for my offset smoker I can lay it down and split as thin of pieces as I want and that would not work on the Wetlands splitter. A person could make a cross handle for it and use one hand to operate both levers but you would still have to hold the small pieces upright by hand. But I really like the Whitlands splitter a well built good safe design. Thanks for the link to Wetlands website and thanks for the comments on my splitter. William
@@williammorris622 The SuperX3100 is single hand operation built for the home owner /small farm at about half that price of the WS150. They are Aussie dollar prices ( currently 65c A.U.D = $1 U.S.D). I know they do ship them to New Zealand but they do have a long waiting list as they are built to order. Just a few ideas for you, you don't see this Australian design wood splitter anywhere else.
@@dustyfarmer AWSOME THEY LOOK LIKE THERE TOUGHEST SPLITTER I SEEN.
I can’t even imagine what shipping would cost from Australia to the US.
@@judge058 Bob it was over $800.00 in their shipping section. Too rich for my blood!
Great engineering!!
Thank you Wallace It still works great after 2 years. I just split a cord of wood for my son a week ago and it is absolutely great for saving your back and faster splitting.
Nice Job!
How about some pictures of the table down and mid rise.
Robert if you will send me your cell number i will text you pictures
E-mail is harder for me to send the pictures.
Simple, good design. But, one item I would have liked to see was the device to prevent the table from moving down.
Its a simple spring assisted 3/4 inch box tubing inside a 1inch box tubing with a notch cut about 1/2 in deep 7/8 inch wide to let the 3/4 inch pivot as the table comes up it pushes the 3/4 box tubing back into the 1 inch and when the table gets level it pops out under the table so on the split stroke the table sits on the pivot and stays up.
Nice idea, going to build on here.
Where did you get the table latch? Great design!
Thanks James I sent you email glad to hear from you,
Thank you for the comment hope you enjoyed it.
Great job… you should sell that lift
Thanks Greg for your comments! There are so many different splitters and models it would be a nightmare trying to get drawings of all of them.
Awesome Brother
very smart. well done.
Thanks not a hard build just takes time measuring and fitting.
Nice work, how much weight do you think it will lift?
Ed I did have to redesign the slide on the I beam I tried picking up a large round 16 inches long and 2.5 foot in diameter and the pipe bent and it jumped off. I don't usually have anything much over ten to 12 inches. So what i did was replace the 1/8" flat and ran a 1/2 inch plate across the top of the I beam and put one on each side under the top i beam plate and let it stick out about 2 inches on each side stooping just short of it dragging against the Vertical plate. i Used two 5/16" square steel key stock and welded it between the two flat plates on outer edge and another 5/16" key stock not quite touching the edge of the I beam leaving a slight clearance. i drilled two 5/16" holes through both 1/2 inch plates just behind the key stock and pulling the upper and lower pieces tight against the key stock. I then found a 5/8 inch bolt with a square head and welded it to the center of the 2 5/16 slide pieces and when the table goes down the cable from table to the slide lets the table follow it down put your log on the table foot and when it starts lifting the back side of the splitter head hits the bolt picking up the table and log so when the table reaches level the trip pops out and and wont let the table go down while you are slitting.
At least 250 lbs
Unreal firestarters
I built a cover that flips up to access engine how ever never thought about a cover over filter area Guess I gonna think about that now lol 😊
Doug thanks for the reply.This one is easy to remove 2 1/4 inch bolts and its off. I can change filter without removing protector.
Great ideas!
Thanks for your comment.
Awesome love it
Great stuff paw paw
Thanks Isaac lots of people have requested how to info.
Great Job.
Thanks a lot for the comment Shane.
Bill I couldn't help notice how noisy the damn thing is. Sure a muffler mod required.
It is a bit loud but it does have a muffler you can't idle this model down it's wide open or off.
I love it!!
Thank you Machfrk
Do you care to make video on how u made limiter an materials?
Roger I will be out of town until Thursday if you would like to call me I can explain on how I built it like did. But another brand or size splitter might be different. Cell # 337 351 8542
Roger use my e mail to contact and I will send you a email back on how I did mine. Thanks
How did you lock the table in place?
There is a spring latch just behind the foot of the splitter the opposite side of the main I beam. When the table comes up from the ground and right before it gets level if slides against the latch pushing it in and when it gets level the it clears the latch and it pops out then when the ram moves forward table sits down on the latch. when you want the table to go back down the operator pulls the handle on the operator side and hold it until the table starts down then you can release it while the table goes to the ground.
@@williammorris622 could send me pictures? Also, where did you get the supplies from?
Thanks
Gary
You are squared away! Geaux Tigers!
Brilliant!
Thank you for the kind review. Glad you liked it my back shure does!!
What part of Louisiana? I'm from Franklin down in St Mary.
Jimmie I live in Opelousas. We are almost always around the house. If you get up this way email and come by I would show you my splitter and might throw in a cup of coffee👍
@@williammorris622 sounds good my friend
Great mods! Thanks for showing them!
Thank You for taking the time to watch and for the complement.
Awesome !! Thanks
Louiegary I would be glad to send you pictures if you will tell me what part or parts of the table or splitter you need picts of. Please use my email to contact me that I have listed with the video' It would also be easier for me to send them to you by text instead of e mail. Be glad to send you my cell number and I can answer your questions over the phone. I have done that with others that have had questions. Thanks William Morris
I love it.
thank you!