what made you come to the conclusion that the gps data isn't accurate? I can assure you, the gps is far more accurate then Meepos remote, even if your using the wheel speed they provided
Drove the board next to cars and other boards and the speed finally synced. Also the GPS data in editing started going to 0, so idk if the spot we filmed at was good for that
One thing I noticed was you guys were not in an aero position. Your torso should be more forward so your head is more in-line with your back and get your arms out of the way by keeping them straight back as much as possible. Your body has a lot of drag when you're getting above 35mph. Speaking from experience as a road cyclist, body position is very important in order to get those top speeds. @@JackHasWifi
lol ya never go by the remotes. in my experience, MOST remotes (not all) are off, even when the proper data of wheels/pullies are logged in. always use a aftermarket gps app..
⚡ *Another bangin video* ⚡ I try to stay under 20mph 😂 I love pulley videos, it's interestin stuff. Hobbywing remotes keep it simple, gear ratio easily calculated. Ratio Settings make sure your speed/distance are shown correctly. Better off usin a GPS for most accurate readings. My Meepo comes with 105mm wheels and 36T pulley, I'm tryin 32T with 85mm caguamas, thick plastic risers replaced with thin cork shock pads, much closer to the ground 👌🏼 Ideally 32T is better with 90mm for the Flow but I can use the app to turn down the torque/braking a little bit.
Probably more honestly! With the right gear ratio and remote set up. Having had this board with the 105mm that comes with it. I switched to those beautiful 105's. I recently had to replace my remote and had to learn all the setups. There is a mode or power on the remote maxing 99 output. I set it up to 92 ish. Of the four modes, I put it on 3 and it already goes up to 35 mph no problem what so ever. By contrast the stock wheels only maxed it to 30 mph on mode 4. That said the more you get to know this board the faster you realize it can go with the right set up. Pretty sure anything bigger than the 110mm will exceed 40. Of course this is for riders under 220 pounds. Weight is definitely a factor as well.
Meepo needs to supply 23T or 29T pulleys to back up their advertised 40 mph top speed! Voyager has big pulley bearing, no other pulleys fit (unlike Hurricane, Verreal RS, Zeus Pro Bamboo)
Stock comes at 30mph, switch to 105 or 110's. Program the remote power output from 1 to 99. Increase output to 90 or higher. I promise you won't be disappointed if you want to go 40...! Insanely fast.
It’s funny, 40 isn’t shit on a board. Just tighten the trucks. Keep your legs firm, and little tip. If you have good enough balance and stand your weight right above the motor the acceleration gain is A+
man i got some 23 tooth gears going with some random belts right now. my remote said 35 kph. but the speed radar said 51. trust that gps, its really hard to tune these remotes to give a correct speed.
Did you mention your actual weight? Maybe a lighter person can get a higher speed with the same set up. What about the indicated speed on the remote if you just max it out without weight on?
I believe it can with a longer runway. I've hit 32 mph on my Exway X1Max Hub motor with 110rovers on it. That first runway your testing on is so short bruhhhhh. And how many miles did you get on your rovers before they failed tread wise? I had my hub sleeve internal plastic sleeves fail on both my rovers after 200miles
@@JackHasWifi see mine failed for the hub version has two internal sleeves that slide on motor before the donut does, and those two plastics sleeves failed under max temperature and constant 28-32MPH rides, 6-10 miles at a time, several times a day when I could get charges in, and those sleeves failing resulted in inner cores failing as well. All within 1 month. 200 miles. Then cloud is fucking me around with slow as hell shipping, telling me 7/17 the items would ship in two days for them to ship 9days later with a 3rd party slow courier, not FedEx which would've taken 5days total. Amazing wheels but faulty design for hubs and really shitty logistics etc
I need to get myself the right gear, so I can do a straight forward review on it reaching 40mph, but ofcourse I need the safety gear. I am not going to make that kids mistake on the Hurricane, glad he was okay in the long run, but ouch.
Hey I have the meepo voyager with 110mm cyclone wheels and 32t pully says only 29-32mph with gps the controller wheel speed doesn’t change the speed of the board in real life just adjust calculations for a guess of your speed. if you want to go 40mph you gotta get a smaller pulley then 32t or a bigger pully on your motor
Hello, i orderd the AT2 pluss and it keep getting delayed. It's been 10 days since it was supposed to ship. Is this normal, have i been scammed? Can anyone help with this?
Use the downhill longboarder aerostance, Get the smooth mad 105 clones, a treaded wheel slows you down. It may also be a good idea to pack your bearings with grease.
Gree8 vid. That little board has a bunch of power and response to it. I bet a smaller pulley and wheels that arnt chewed up will get real u close. The fastest I ever got it was around 35 with a nice tailwind and 100mm boas and that felt feee-ast. Gre8 job bro🫡🫡
![[ TEASER ] เงาะป่า - วงL.กฮ. | TMG RECORD](http://i.ytimg.com/vi/M4ObdFfcPww/mqdefault.jpg)
what made you come to the conclusion that the gps data isn't accurate? I can assure you, the gps is far more accurate then Meepos remote, even if your using the wheel speed they provided
Drove the board next to cars and other boards and the speed finally synced. Also the GPS data in editing started going to 0, so idk if the spot we filmed at was good for that
One thing I noticed was you guys were not in an aero position. Your torso should be more forward so your head is more in-line with your back and get your arms out of the way by keeping them straight back as much as possible. Your body has a lot of drag when you're getting above 35mph. Speaking from experience as a road cyclist, body position is very important in order to get those top speeds. @@JackHasWifi
@@JackHasWificars aren’t accurate per say either. Get in front of a radar
I own the Voyager. this board is NUTTS! Crazy fast! I never feel like I’m lacking power.
I agree. I rarely sit on full throttle.
If you tune the remote and add the 110 cyclone wheels 40t gear band you can hit 40 to 45
lol ya never go by the remotes. in my experience, MOST remotes (not all) are off, even when the proper data of wheels/pullies are logged in. always use a aftermarket gps app..
Which one do you recommend?
So close, I'll get your camera equipment one day 🤣🤣💀
super underrated channel man, recently found ur vids and now i cant stop watching!
Those words mean a lot more than I can express🥲
⚡ *Another bangin video* ⚡
I try to stay under 20mph 😂
I love pulley videos, it's interestin stuff.
Hobbywing remotes keep it simple, gear ratio easily calculated. Ratio Settings make sure your speed/distance are shown correctly. Better off usin a GPS for most accurate readings.
My Meepo comes with 105mm wheels and 36T pulley, I'm tryin 32T with 85mm caguamas, thick plastic risers replaced with thin cork shock pads, much closer to the ground 👌🏼
Ideally 32T is better with 90mm for the Flow but I can use the app to turn down the torque/braking a little bit.
Probably more honestly! With the right gear ratio and remote set up. Having had this board with the 105mm that comes with it. I switched to those beautiful 105's. I recently had to replace my remote and had to learn all the setups. There is a mode or power on the remote maxing 99 output. I set it up to 92 ish. Of the four modes, I put it on 3 and it already goes up to 35 mph no problem what so ever. By contrast the stock wheels only maxed it to 30 mph on mode 4. That said the more you get to know this board the faster you realize it can go with the right set up. Pretty sure anything bigger than the 110mm will exceed 40. Of course this is for riders under 220 pounds. Weight is definitely a factor as well.
I have this board & its powerful even compared to the other boards that cost hundreds more,its a fly under the radar board
Bonjour, pour aller plus vite,garde les roues mais utilise les 32t pulley,tu verras que les 65 sont réels
Meepo needs to supply 23T or 29T pulleys to back up their advertised 40 mph top speed! Voyager has big pulley bearing, no other pulleys fit (unlike Hurricane, Verreal RS, Zeus Pro Bamboo)
Stock comes at 30mph, switch to 105 or 110's. Program the remote power output from 1 to 99. Increase output to 90 or higher. I promise you won't be disappointed if you want to go 40...! Insanely fast.
Only real friends tell you you’re gonna die and ask for your possessions. 😂
It’s funny, 40 isn’t shit on a board. Just tighten the trucks. Keep your legs firm, and little tip. If you have good enough balance and stand your weight right above the motor the acceleration gain is A+
man i got some 23 tooth gears going with some random belts right now. my remote said 35 kph. but the speed radar said 51. trust that gps, its really hard to tune these remotes to give a correct speed.
I really enjoyed that. Great job 👍
Did you mention your actual weight? Maybe a lighter person can get a higher speed with the same set up. What about the indicated speed on the remote if you just max it out without weight on?
I believe it can with a longer runway. I've hit 32 mph on my Exway X1Max Hub motor with 110rovers on it. That first runway your testing on is so short bruhhhhh. And how many miles did you get on your rovers before they failed tread wise? I had my hub sleeve internal plastic sleeves fail on both my rovers after 200miles
Tread didn’t take long to fail, but the reason behind it was because I’d drift them and force them to slide.. which they obviously weren’t meant for😅
@@JackHasWifi see mine failed for the hub version has two internal sleeves that slide on motor before the donut does, and those two plastics sleeves failed under max temperature and constant 28-32MPH rides, 6-10 miles at a time, several times a day when I could get charges in, and those sleeves failing resulted in inner cores failing as well. All within 1 month. 200 miles. Then cloud is fucking me around with slow as hell shipping, telling me 7/17 the items would ship in two days for them to ship 9days later with a 3rd party slow courier, not FedEx which would've taken 5days total. Amazing wheels but faulty design for hubs and really shitty logistics etc
Dude should have put 96a riptide bushings on it. Would have been super stable.
Man what type of wheels did u ride on this contention?
I couldn’t find those wheels on their site
hey so i got stock meepo voyager what do i need to buy to get 40mph ?
Ace deck n1!
What song was that right before attempt 3?
Raith is the fastest street Board..86mph top speed
No not die become crippled for life and your body becomes your prison, much worse than dying.
I need to get myself the right gear, so I can do a straight forward review on it reaching 40mph, but ofcourse I need the safety gear. I am not going to make that kids mistake on the Hurricane, glad he was okay in the long run, but ouch.
The board is already capable, I just need the safety gear lol. It will keep up with 35mph traffic in mode 3 of the 4 modes!
Great video as always, definitely not bias!
Hey I have the meepo voyager with 110mm cyclone wheels and 32t pully says only 29-32mph with gps the controller wheel speed doesn’t change the speed of the board in real life just adjust calculations for a guess of your speed. if you want to go 40mph you gotta get a smaller pulley then 32t or a bigger pully on your motor
Great video Jack. Keep em coming mate
I appreciate your support a lot Craig🫡🫡
Hello, i orderd the AT2 pluss and it keep getting delayed. It's been 10 days since it was supposed to ship. Is this normal, have i been scammed? Can anyone help with this?
Did you order directly from Wowgos website?
there must have been something on the camera lens, I thought it was my screen for a second
Found it nvm thanks !
Use the downhill longboarder aerostance, Get the smooth mad 105 clones, a treaded wheel slows you down. It may also be a good idea to pack your bearings with grease.
105 won’t get to 40mph.
I get 33mph max with 105s
@@akultimate9431I’m hitting 38mph voyager 105s
@@dwight_boi how?? Track your speed on a phone and not the remote. Then see what your top speed is
Awesome video man
Fire
42 😂brother
Gree8 vid. That little board has a bunch of power and response to it. I bet a smaller pulley and wheels that arnt chewed up will get real u close. The fastest I ever got it was around 35 with a nice tailwind and 100mm boas and that felt feee-ast. Gre8 job bro🫡🫡
That gives me hope, might have to do a part 2😭