Trail Tech Vapor Stealth install on a Yamaha YZ426F
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- In this episode I'm installing a Trail Tech Vapor Stealth computer, gauges, I'm hard wiring it to the bike power, installing the engine temperature sensor, speedometer and RPM.
The YZ426F is coming along very nicely.
I hope you guys enjoy and thanks for watching.
SUPPORT THE CHANNEL: www.paypal.com...
Most of the products I buy on Amazon can be found here:
www.amazon.com...
GET YOUR ALBE'S ADV SHIRT: teespring.com/...
IF YOU LIKE THE ALTRIDER SHIRT: amzn.to/2ET2toN
Subscribe for more YZ426F / albesadv
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
IN THIS VIDEO:
Trail Tech Vapor Stealth: amzn.to/2JQ0qHC
I BUY MOST OF THE O.E.M. "difficult to find" PARTS FROM BIKE BANDIT: bit.ly/2AF3t0n
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If you live in Socal have an ADV/DualSport bike join my FB group and let's go ride together.
www.facebook.c...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For more about the F800GS check out my site
www.albesadv.com
GET YOUR ALBE'S ADV SHIRT: teespring.com/...
IF YOU LIKE THE ALTRIDER SHIRT: amzn.to/2ET2toN
I BUY MOST OF THE O.E.M. PARTS FROM BIKE BANDIT: bit.ly/2AF3t0n
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
BMW F800GS ACCESSORIES: albesadv.com/bm...
MY GEAR: albesadv.com/gear/
CAMERA GEAR: albesadv.com/gear/
DUCATI SCRAMBLER ACCESSORIES: albesadv.com/sc...
APRILIA TUONO V4 1100RR ACCESSORIES:
EVOTECH front and rear axle slider: ebay.to/2L4eM5K
EVOTECH frame sliders: ebay.to/2wIIdHl
EVOTECH radiator guard: amzn.to/2tOApPE
EVOTECH oil cooler guard: amzn.to/2tClNU4
ProGrip wheel tape: amzn.to/2tEhoAd
Tinted windscreen NOT OEM: ebay.to/2x8snG5
Tank Pad: amzn.to/2IWm2PS
Brake reservoir sock: ebay.to/2xcUxjm
PMP 2.0: www.af1racing.c...
YAMAHA YZ426F PARTS & ACCESSORIES:
ProTaper Contour Handlebars: amzn.to/2QMmjg5
Cycra handguards: amzn.to/2R8sDh6
Barkbusters handguards: amzn.to/2UZACw7
Generic brand Handguards: amzn.to/2R3eC4r
Blue Grips: amzn.to/2Lv5mR3
Yamalube 20W-50 1Gallon: amzn.to/2F6wiFY
Yamalube 20W-50 1Quart: amzn.to/2BVixXe
Oil Filter: amzn.to/2CLYkVE
UFO frame guards: amzn.to/2GtAEHL
YZ426F spark plug: amzn.to/2HZ8dDN
Fuel valve: amzn.to/2HX77s8
TWIN AIR dual foam filter: amzn.to/2ECFUar
ALL Balls Carburetor Repair Kit: amzn.to/30CHwu3
HELIX Clear Blue 1/8" Polyurethane Vent: amzn.to/2QgLSCl
Trail Tech Vapor Stealth: amzn.to/2JQ0qHC
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
follow me here:
FACEBOOK LINK
/ albes-adv-163688985325...
TWITTER LINK
/ albesadv
INSTAGRAM LINK
/ albesadv
GOOGLE+ LINK
plus.google.co...
#albesadv #dirtbike #trailtech
FAN MAIL TO:
Albe's ADV
P.O.Box 7571
Riverside CA 92503
Whatdafunk by Audionautix is licensed under a Creative Commons Attribution license (creativecommon...)
Artist: audionautix.com/
I'M NOT A MOTORCYCLE MECHANIC NOR AN ADVENTURE RIDING INSTRUCTOR, TAKE EVERYTHING I SAY WITH A GRAIN OF SALT, I'M JUST AN ENTHUSIAST SO DOUBLE CHECK YOUR OWNER'S MANUAL FOR THE CORRECT PROCEDURES AND SPECIFICATIONS.
EMULATE AT YOUR OWN RISK.
Great video, thank you! Gave me the confidence to install this on my 04 wr450f. I wrapped the wire around the coil. With the water seal holding it in place it was actually a clean and stable install. I also went directly to the battery for power and it worked well. Just in case anyone was apprehensive about soldering to the stator wires on a bike equipped with a battery.
Well done 😀👍
I just ordered my Trail Tech, thanks for sharing this, I feel confident installing it on my WR426 now!
Thanks man, I was having trouble wiring it up to the stator. I was trying to run it off the pink and black wire. It doesn't like it. I hooked it up like you did, and I runs perfect on my 09 yz450. This is the best trail tech installation video I've seen over the years.
Thank you Kaiden, glad to help 😀👍
The stuff your putting on the wires is called wire loom😁👍
WIRE LOOOOOOOOOM!!! thanks 😀👍
We goinnnnnnn hardddddddd
Such a good video!
Thank you 👍
Hey Albe! Very nice video!!👍👍 i have a question.....from
those two wires (green and black) do you know how much Volts does it have?
Hi Smc Sumo, unfortunately I don't know and I can't even check cause I don't have the bike anymore
Only works if you keep the front wheel on the ground! Not great for the 426
Dude I never thought you could run the vapor tech off the stator ? Have you noticed any ignition issues or riding power issues?
No power issues, when it comes to the ignition I’ll let you know as soon as I’m done rebuilding the carb. I’m replacing the mid-body o-rings, adding a sigma jet kit and a quick-shot 3 and new accelerator pump membrane.
Albe's Adv Yeah those are all very necessary mods the mid body gasket is usually the reason these FCR carbs start acting up...if you’ve got a small hiccup right off idle that won’t go away the mid body is usually the culprit
Could you show me how to wire a headlight on a wr426f please.i don't know wha5 wire is live and neg . Will it be green and black like ones for power on trail tech? Great vids from the UK ✌✌✌
Unfortunately without having a wr426f in my hands to figure out the wiring i can’t help, I don’t want to give you the wrong info and make a mess.
@@AlbesADV thats fine bud thank you for the reply
How do you get the dash to light up all the time ?
The unit is wired into the bike and every time the bike is started or even just kicked the light comes on, is you don't start the bike, the light goes off after a few seconds if you start the bike the light stays on
Did you upgrade the stator, or is that the factory stator?
Factory stator
@@AlbesADV thanks, im running a vapor off battery. I didnt realize that i could run an extra electrical load off the factory stator.
You are certain you are running the Trail Tech Vapor off of the bikes factory AC output? I want to run the same setup on my 426f. How are you certain you are not using the Trail Tech’s battery?
@@christianbenfell2715 because when I start kicking, even before the bike turns on, the dash lights up with every kick. If you are off the battery you need to turn the back light on manually
Okay thank you. I will copy you. I am surprised the instrument cluster operates off AC current.
I got one guestion, did you wire the rpm sensor directly to the ignition coil 12v wire? It kinda shows and kinda doesnt in the video
Yes, directly to the coil male plug.
@@AlbesADV did you just use the red sensor that you normally wrap around the spark plug cable?
Yes, I shortened to the length I needed, I attached a female connector to it and plugged it in, in my case the coil had an empty male connector on it
@@AlbesADV thanks so much man! I will look into it shortly, I got a WR426 but it's quite similar.
What kick sta.d is that for a trail stand??
Not sure, it came with the bike
Where did u get your steering Stabilizer?
That one was on the bike when I bought it
Just got new trail tec pro too. but it did not come with wheel sensor is it gps automatic or how dose it work?
If you bought the one specific for your bike should have come with the speed sensor. The GPS is integrated and should just work.
What part number is this
752-200
How’s it running ?
So far it’s working great, really worth it.
How much did you spend on the whole set up ?
About $150 the trail tech kit came complete with all the sensors, and I made the bracket out of aluminum I had laying around.
Thanks for the info