Repair Of Rob`s L322 (91452C) Thermo Top C Board

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ม.ค. 2023
  • Rob contacted me because his Webasto was not working and would start and stop when he opened the doors or windows.
    Leaking caps caused damage to a few components on the board and the pump mosfet was blown.

ความคิดเห็น • 28

  • @robertbanks3775
    @robertbanks3775 ปีที่แล้ว +1

    Rob is definitely pleased. I will be recommending you.
    The water pump that came one that webasto was sized when I got it. I had replaced it but clearly it wasn't going to help with all those issues.
    Looking forward to lots of heat again! Thank you.

    • @robinsonlabs
      @robinsonlabs  ปีที่แล้ว

      Thats what we are here for!

  • @simonparkinson1053
    @simonparkinson1053 ปีที่แล้ว

    Reminds me I still haven't sent you my 91452C board with the fan MOSFET gate drive fault.
    Made me think when you were talking about the MOSFET on this board operating in the linear region.

    • @robinsonlabs
      @robinsonlabs  ปีที่แล้ว +1

      You know what to do then, the faster you send the faster its repaired👍

  • @StreetMotionUK
    @StreetMotionUK ปีที่แล้ว

    Loving the content. You're like a British Louis Rossmann 😁

    • @robinsonlabs
      @robinsonlabs  ปีที่แล้ว +1

      Thank you so much! i will be doing a soldering tutorial in the next video, showing what tools i use while recreating an old Land Rover board from scratch that is not available any more!

    • @StreetMotionUK
      @StreetMotionUK ปีที่แล้ว

      @@robinsonlabs Are you able to repair the L322 LCM boards? I think mine is on the way out.

    • @robinsonlabs
      @robinsonlabs  ปีที่แล้ว

      @@StreetMotionUK Is that the seat motor ecu?

    • @StreetMotionUK
      @StreetMotionUK ปีที่แล้ว

      @@robinsonlabs It's the 'Light Check Module' - slightly odd name, but it essentially controls all the lighting circuits in the vehicle and I think also stores a backup of the odometer value. Not sure if it does the seats as well, I'd guess that may be a different board. The LCM is located in the right of the drivers side footwell and suffers from moisture ingress as per everything electrical on a range rover!

    • @robinsonlabs
      @robinsonlabs  ปีที่แล้ว

      @@StreetMotionUK i tell you what, give me an e-mail and we can talk more

  • @madmax_ro
    @madmax_ro 7 หลายเดือนก่อน

    Can you please post the exact specifications of the replacement components there?
    I managed to find the 10k ohm , 7.5k ohm and 49.9k ohm resistors.. but they have them in many mW specs like 100mW, 0.2W, 0,3W.. so not sure wichs is needed. Also found the mosfet (are they all the same BTS117TC?) .. Failing to identify those JRB capacitors tho. Can you please post the details? Thanks and awesome work there..

  • @ANAana-xf7cf
    @ANAana-xf7cf 4 หลายเดือนก่อน

    Hello. Dear Rob Where can i find the schematics for this board ? Thanks

  • @alcramb9184
    @alcramb9184 ปีที่แล้ว +1

    Excellent vid👍, where do you get your components from? I'm struggling to find quality particularly the caps

    • @robinsonlabs
      @robinsonlabs  ปีที่แล้ว

      switch electronics, jrb and hitano caps!

  • @user-ve4dy6xw9m
    @user-ve4dy6xw9m 6 หลายเดือนก่อน

    Hi I have a webasto thermo top c 5 kW heater, I after one of your PC boards, I've looked you up on Google, but I can't find you, thank you also thank you for your videos

  • @David_11111
    @David_11111 ปีที่แล้ว

    what uv torch do use / recommend? Mechanic 10ML GY-UVH900 Green UV Curable Solder Mask Paint for PCB Jumper Wire Protection would that do ?

    • @robinsonlabs
      @robinsonlabs  ปีที่แล้ว

      Hi, i use this with both leds on: www.aliexpress.com/item/33003736533.html?spm=a2g0o.productlist.main.1.3e723f7fOLPlXY&algo_pvid=10998965-3960-466b-b383-d1ff80e31cef&algo_exp_id=10998965-3960-466b-b383-d1ff80e31cef-0&pdp_ext_f=%7B%22sku_id%22%3A%2210000006044528036%22%7D&pdp_npi=2%40dis%21GBP%2111.4%2110.25%21%21%21%21%21%402102160416729701625772701d06cd%2110000006044528036%21sea&curPageLogUid=zZsf1z6wa0L2
      It must have both 365 and 395nm!
      regards

  • @robvosters
    @robvosters ปีที่แล้ว

    I see nice video`s. Where is the video where you show the track and trace as promissed. When will my board be returned?

  • @benjaminjartou9988
    @benjaminjartou9988 ปีที่แล้ว

    Hello and thank you for all your videos.
    In france we are a large community Who have Volkswagen t5 (caravelle Multivan etc) between 2003 and...2012 perhaps. We all have the same defect with our webasto thermo top c. The ventilation of webasto is always turning, it doesnt matter if the vehicle is running, stopped, with key or not. It kill the secondary batterie and, of course, stop ventilation. During this time , i think generally the webasto is not hitting.
    Do you know this defect ? And the way to repair ?
    Many thanks for your videos. Thats very helpful and sorry for my english.

    • @robinsonlabs
      @robinsonlabs  ปีที่แล้ว

      Hi, there can be a few reasons for the issue of the fan running all the time! E-mail for more info... robinsonlabsltd@gmail.com

  • @jusgaa
    @jusgaa ปีที่แล้ว

    How you can test webasto in bench which uses CAN network to work?

    • @robinsonlabs
      @robinsonlabs  ปีที่แล้ว +1

      by using the diagnostics on w-bus.

  • @nickschaefer77
    @nickschaefer77 ปีที่แล้ว

    Hi
    I have a webasto with the exact same board.
    Is there like a pattern, which parts cause which malfunction.
    Or else, is there a pattern, which error is caused by which part?
    Great Video

    • @robinsonlabs
      @robinsonlabs  ปีที่แล้ว

      With that board problems arise from aging of the caps that leak, then cause more problems! but caps leaking only really affects the (91452C) board, other boards all have there own common faults!

  • @David_11111
    @David_11111 ปีที่แล้ว

    yay

  • @jamesfitzmaurice2985
    @jamesfitzmaurice2985 9 หลายเดือนก่อน

    Hi I paid for a pcb repair and have not heard anything HL30 12 VOLT thanks james

    • @Ade-gs3lj
      @Ade-gs3lj 7 หลายเดือนก่อน

      Hi, have you heard anything yet. I too have paid for the PCB repair and heard nothing. Cheers

  • @sidney6383
    @sidney6383 ปีที่แล้ว

    *PromoSM*