How To Install Roaring Toyz Lowering Links
ฝัง
- เผยแพร่เมื่อ 18 พ.ย. 2014
- This is an installation video for Roaring Toyz 5 Hole Lowering Links. Our 5 hole lowering link allows for 5 different levels of adjustment and this video shows how to correctly install them.
We make these links for Kawasaki Ninja 250, Ninja 300, ZX6R, ZX9R, ZX10R, ZX12R, Suzuki Hayabusa, GSXR 1000 and Yamaha YZF 600.
Check out our lowering links at www.buynowroaringtoyz.com/cust... - ยานยนต์และพาหนะ
Who is watching this in 2023
2024!
This is one of the best how to videos for lowering links on the internet. Thanks a lot!
Thanks for uploading this video! This is the most informative and instructional video out there. Please do a complete video on how to properly lower the front end in proportion to the lowering links installed. Subbed!
Thank You! This gave me the confidence to buy your lowering kit to adjust my bike so my girl can ride it now!
Very detailed and informative. Thanks for making a complete video with “tips” for making it easy.
I am sold, this video was executed so well. I am ordering mine right now.
Greetings!! Thank you so much for this great video. Thanks to it today I successfully to install a lowering kit for Kawasaki Z400 without any issue. All thanks to your detailed tutorial. You saved my day...
Best video. Straight to the point and went over every little thing.
Can you do a video on chain tightening? This video was so detailed and helpful! That would be SO much appreciated.
One of the best videos I have ever watched on TH-cam!
That was very enlightening. I have a lowering kit I want to remove and it seams much easier now.
First of all; why the blazes is this bike boosted!? Hahaha! Awesome.
Extremely well done video with experienced tips and tricks! Thank you!
Most informative video of what I was looking for. Thank you
Simple and right information good job and thanks!
Thank you, very nice video and clear ! I did mine on my z750
GREAT VIDEO!!!! I CAN NOW BUY THE BIKE I WANT! THANK YOU.
Awesome video! Thanks 😎👍
Awesome video! Thanks.
Thank You! I’m 5’ 7’ This will be Great!
Thanks for most detailed
Well specified berry good video
...
Interesting video, quick question, do you need to increase the chain free play when a bike is lowered? Thanks
very helpful. thank you
Who is watching this video in 05/2020>
5/2023
6/2023 😂
@@munirsiraj1451 oh my sold it already 😀
So glad I found this. I'm 16 and only 5 foot, and I want a Honda CBR250 and I'm too, well short. This helps alot. However, does this cause an increase in tension in the rear spring.
Great video thanks for sharing.
Great video, I'm sure the ninja 300 and the ninja 400 are pretty similar, so this gave me an idea of how to go about the job. However, would it be a good/safe idea to use a rear bike mount to do this job?
Roaring Toys, do you drop the front then as well? Could you do a video showing how to lower the front the right way so the geometry and handling isn't messed up? Would love to buy lowering links from you guys but lowering the front seems difficult
I bought the roaring toys lowering kit. Rear, front and kick stand. Any chance you can do a video on how to lower the front and install kick stand on a ninja 300???
i have these lowering links, i wanted to raise it a bit more, i lifted it like here in the video with that lift but the links still were not budging, it still felt stuck. Could'nt find a sweet spot. If I hit the long bolt out the other end, will my bike be okay? it wont fall right since the jack is what is holding it up. please answer.
Is it possible to increase the height of the ninja 300? I hear that the seating in that bike is very low and that its good for short riders. I kind of prefer a bit higher seating position bikes so I was wondering if there was a way to increase the height of the bike.
Finally the right way to do it
the farthest the distance of the holes, the lower the bike but, measure first what you need THEN use the correct hole. Usually the "bone" goes from 120mm to 150mm. My Tiger 900 Rally Pro standard is 100mm, 120 was too low, so I ordered a 110mm , the bike lowered 10mm (1cm) and high was perfect for a flat foot.
Is the r6 and the r1 the same as the bike you are working on? Very good video thankyou.
Looking to lower my Roadstar 3" in rear.Will this kit work?
Will lowering front fork make the clutch cables longer relatively?
Is this the same process regardless of the type of links including if you wanted to put the stock links back on?
hi, does lowering the bike by an inch already affect the handling and side stand of the bike? i want to lower my cbr500r only by an inch, i don't want it too low, i just need 1 inch to be flat footed. does it affect the handling and side stand already? thanks
Do you have a way to correct the swing arm angle after dropping it that much?
any idea where i can buy a lowering links for my yamaha tt e 600 1997 model ,thank you
Great help 👍 👌.
I have a 2013 honda cbr600rr do you guys have any lowering links for my bike?
i know im asking this a little late in the game but i just started riding again after a 10 year break. i recently got my hands on a ninja 300 and have been doin some mods on it. so the questions is. IS THAT A TURBO YOU HAVE ON IT?
Killer sleve trick Thanks
can you do a lowering video on suzuki dr650. thanks!
Man can u help me. I have a honda hornet 599 2006. And I can't find any lowering link do some other bikes have different way to lower. ?
any peep the turbo??
How much power did it gain after the turbo?
Ok if you lowered it to the max what is the seat hieght at from original. Thanks
Good video
jjrock5 Thank you! We hope it was informative and useful.
+Roaring Toyz, If people aren't too too short imo people should regret lowering their bike once the bike is moving. Stopping is 10% and 90% is riding. Lowering the bike makes it worse I assume. When leaning you want suspension travel when you hit something because when you bottom out leaning the bike can go down. I like the comfort knowing I can lean w/ confidence because I didn't lower the bike. I'm 5'275 and like 5'375 with the shoes. I can tippy toe both sides with like half an inch in the air on a stock '05 R6. I can flat foot on one side which means I'm covering the rear brake uphill. I just get off the bike and roll it with 2 feet on one side. There is no need to 2 feet backup while on the bike.
hi im looking for a lowering links for my yamaha tt e 600 1997 model ,can you help me find the item please
Any tips for getting the sleeve out? The screw moves in and out, but the sleeve doesn't seem to want to budge.
Do you make these for the cbr600 f2
You didn't even torque bolts when you were done ..do you have to put lock tite on them when you tighten them up???
No because they are nylock nuts,,
Question someone please please help, Can I lower the rear without having to worry about the front? 2015 Hayabusa
Can i lower my r1 2012 the same way? I want lower my bike 1 or 2 inch will it affect the performance and handling of the bike?
will that link work for a 2008 honda 600rr
will this link work on gsxr 600/750?
Hi,
Can be this done with cbr1000rr?
Tie down the front, Jack it from the bottom to release the load. Is what i have always said
I want to raise my bike, what should I buy? I have a honda crf 250 L
Does this fit a 2012 yamaha yzf-r6?
Any need to adjust the fork tubes ?
Will this fit 2017 Yamaha r6 ?
Roaring toyz doesn't have a stock option -- at least I think. I ordered a link with a stock setting, and Roarint toyz's top notch is an inch less than stock.
Is use full for Yamaha fz bike
Will it work in an 2015 R3
Can we do it for yamaha r6 ?
Why did the video cut off? I wanted to know how to lower the front end to the correct height too..
Would those work on a 2023 zx
is that a turbo on that 300!?!?! what turbo is that? and what upgrades are on the bike for this turbo?
I think it is
That would be a water pump...
I SEE A TURBO !!!!!!!!!! good vid btw
Happy Trails haha I thought that’s what that is. Interesting to put on a 300
Thx
Não falo inglis mas me ajudou!!! Obrigado
Could have replaced to bolts in the opposite direction, meaning, nuts on the other side. Allowing further adjustments easier
why would you have a turbo on a 300cc bike !?
2020 ninja??
I lowered about 2 cm what about the fork, 1 cm? Ratio : the half cm than rear ? Thanks
Me also facing same question.
thanks for the video i installed the rear link but i dont think its the right height could you please tell me which hole is only for the 1 inch drop?
1ST HOLE IS 0", 2ND IS 1", 3RD +2", ETC.. bUT YOU CAN VERIFY WITH STOCK TO SEE WHICH IS 0, as it might vary from bike to bike.
At the lowest, how man mm can you cut
How much does lowering a sportsbike really affect its handling?
i have my 2015 zx6r lowered with this company links. it makes your takeoff a little unstable. like the handle bars sway :[ almost like a speed wobble. also its had to ride with a passenger on the back.
this is how i bought it... changing it back to stock
for ninja 400?
Is that a turbo I spy
400
how many inches is each setting?
1-5 inches between.
Im guessing its between 0.5 - 2 inches
Great vid but......can we hear that bike running?! ;) :-D
How much of a drop is the lowest setting?
on a 2013 zx6r
Matt Wagers Somewhere around 3.5"- 4".
Am I the only one noticed a very small turbo charger on the 300? On to the reviews lol
Is that a turbo? damn
Seriously Does it come stock with the bike
"No jacking on the suspension" ROFL got it
Why lower it? Doesn't this mess up the bike's geometry?
For short people or drag races
For a bajaj pulsar ns 160
BOOST !!!!!!!
Turbo'd 300..Yea we're doing other stuff on this bike.
Zx6r
do we really need that background music ?
600's be sleeping on a boosted 300😴
...did I just see a turbo?? I swear I saw a turbo
does it come stock with the 300
He pointed to it at the beginning of the video saying something about not needing the fairing off. They were just doing other work.
Ninja 300 turbo??? LoL! o_O¡¡