How to Fix a Wobbly Lawn Mower Wheel Cheap (Mend it Man quick fix tip) 😃😎🔧
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- Welcome to another video, in this video I show you a Mower that had very wobbly wheels, this is how I repaired them very cheap. Thanks for watching 😃👍
#Tip #Fix #Mower
AMAZON WISH LIST - www.amazon.co....
Instagram link- / menditman76
Channel Email- menditman76@gmail.com
/ posts
![[UNCUT] “บอสณวัฒน์” ลากไส้!! ใครหนุนหลัง "แม่ตั๊ก ป๋าเบียร์" I คนดังนั่งเคลียร์ I 30 ก.ย. 67](http://i.ytimg.com/vi/QlD7mU2KKRk/mqdefault.jpg)
AMAZON WISH LIST - www.amazon.co.uk/hz/wishlist/ls/12730JDVH330O?ref_=wl_share
A WISH LIST . SOMEONE BUY YOU A TOOL . DO YOU HAVE TO GIVE YOUR ADDRESS OUT ?
@@shanesquire1 No you can set it so the sender doesn’t know. 🙂👍
EXCELLENT THX!!!!! Saved 60.00 on Amazon
I've been dealing with the wobbly wheel syndrome for a little while now, I finally got some time to take care of it. Well it's Sunday June 26, 2022 and and I didn't want to go to the Home Depot.... Soooo I went to the TH-cam store and seen your video, your hack is completely AWESOME!!!!!! I Went outside and did it and it worked awesome. My mower looks brand new to begin with, but now it pushes without the wobble. The wheels are solid. You saved me some money and for that THANK YOU GOOD SIR, JUST SUBBED YOUR CHANNEL
Hi this is the comments I live to see, helping people do cheap or free fixes, I’m really pleased you’ve sorted your wheels with my cheap little fix that makes doing these videos all worth while, thanks for watching and for the sub 🙂👍
Massive quick fix. Thank you. Im going to give this a go when our weather clears 🎉
Have a very old Fleet Farm mower with 4 floppy wheels. Engine is good so im gona give it a go with your method!
Very Good idea! Thank You!
Hey that worked out well .. Great tip !!
Yes I needed to find something that was on hand, as the van was just right. Thanks for watching 🙂👍
Just bought a new Hart cordless mower that I love, but got the wobble quick because of my turf. Fixing today, thanks to you! SUBSCRIBED!
Hi I’m pleased my video has been of help to you, thanks for the sub 🙂👍
Thanks for the video! I did fix wobbly wheel following your method of using soft drink to shim the axel, it is not totally perfect but good enough for my nephew, as the wheel kind of wobble much less 8-) it is after all 26 years old lawnmower, engine still good, also I just replace the drive belt and clean carburetor! Thanks.
Thats a great Fitz, I have been know to use thin wall copper pipe hose as it's called in the wonderful UK
Hi yes i know of people that have used the copper pipe, when i was doing this I didn’t have any copper so coke can idea popped into my head😃 Thanks for watching 🙂👍
Nice little tip! Even though there are no bearings in the plastic wheels, I like to glob some bearing grease in the once in a while during a tune up. It seems to keep the wheels spinning freely, and reduces some of the friction that leads to the dreaded wobble
Hi yes a bit of grease is a good idea 🙂👍 I’ve just subbed your channel 👍 Thanks for watching 👍
@@menditman2004 your welcome! Thank you!
Great Tip mate
Thanks for watching 🙂👍
NICE ONE LUKE . I HAVE NEVER DONE THIS .
Hi Shane, that’s why I do the videos, if I can help people out it makes it all worth while. Thanks for watching 🙂👍
Nice! I pinched a can out of the recycling bin.
Hi great it’s a free fix😃 thanks for watching 🙂👍
Great fix. My axles are worn down at a tapered angle and I couldn’t make anything fit right. Thanks from Florida.
Great tip mendit
Great fix. I will have to try that sometime. Thanks for sharing that!!
Great tip! Thanks!
WOW! Nice
Hi thanks for watching 🙂👍
Sweet fix, top tips nice one
Thanks just this simple fix makes the world of difference, thanks for watching 🙂👍
Nice! Thankyou!
Neat fix Luke.
Thanks Pete, yes I think it worked well. Thanks for watching 🙂👍
good video and job done Luke
Hi I wasn’t quite sure how to fix it, but it just came to me and worked out a good fix. Thanks for watching 🙂👍
Well done Luke nice use of shim material from a pop can. Steves Saloon did one using copper pipe provided you have room to drill out the bore to 5/8 inch and we use bronze isostatic bushings with only 0.001" clearance from the shaft size.
Hi I was getting this old mower ready for sale, but the wheels really let it down, I had some thicker aluminium sheet but that didn’t work so I thought of the can and it worked well. It’s something that everyone will likely have around the house. On a better mower I probably would go the copper pipe route, but for this the coke can did the job. Thanks for watching 🙂👍
@@menditman2004 To use the copper pipe you need to drill out the bore to 0.625" and your wheel did not look like it had enough meat for that size. Additionally, you have a much better fit since the ID of copper pipe is approximately 0.028" bigger than the 0.500" axle diameter.
Great hack, thanks bro.
No problem 👍
Iv done that a couple of times luke 👍🏻
It works a treat doesn’t it, so quick and makes the world of difference. Thanks for watching 🙂👍
@@menditman2004 and you get a drink out of it win win situation 👍🏻
excellent!
Thank you🙂👍
i will have to try that on my old countax sabre 19 bud it has 4 wobbly wheels ;o)
Hi it’s worth a try and it doesn’t cost anything, thanks for watching 🙂👍
so ghetto - i love it!
Thanks 🙂👍
Sunscribed ❤