BMW S1000RR Custom CLUTCH SWITCH Replacement for BMW Motorcycle QUICK SHIFTER Fix

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ม.ค. 2025

ความคิดเห็น • 21

  • @NoLimitsNoRegrets
    @NoLimitsNoRegrets  2 ปีที่แล้ว +1

    A common quickshifter issue on bmw s1k's are the pesky clutch switches, and here's how to replace it.

    • @NoLimitsNoRegrets
      @NoLimitsNoRegrets  ปีที่แล้ว

      @FITNESSOVER45 that would be my first guess. sounds like your bike isn't seeing the clutch pulled in when in gear, so that's where i'd start looking too.

  • @cachencoriver5738
    @cachencoriver5738 ปีที่แล้ว +1

    My quick shifter is not working at all, my CC is fine. I did the plate reversal to close the lower micro switch as you mentioned on your video and did the gear 1-6 reprogram. My QS is still not working, should I assume the microswitch is damaged? Do you know is there's a way to check the microswitch with a multimeter for continuity? I have a 2016 S1000R, but the double microswitch is the same.

    • @NoLimitsNoRegrets
      @NoLimitsNoRegrets  ปีที่แล้ว

      if it were me, based on what you said, yes, i would change the microswitch as it's much cheaper than the QS device replacement.

    • @cachencoriver5738
      @cachencoriver5738 ปีที่แล้ว +1

      Thanks, that's my next step, hope it works.

    • @huynguyenvlog6211
      @huynguyenvlog6211 4 หลายเดือนก่อน

      i have the same problem with you, did you fix it yet? how did you fix it?

  • @Chino1544
    @Chino1544 ปีที่แล้ว +1

    Any idea where I can get that little bolt that fastens the switch?

    • @NoLimitsNoRegrets
      @NoLimitsNoRegrets  ปีที่แล้ว

      the only place i know you can get it is with the switch from the dealer, which would be the fastest/easiest choice. you could try online searching for that screw (i don't know what size it is but the dealer might know) to see if you can find one, but last time i tried something like that, i had to buy 100 in a pack. it's obviously a unique size, so it might be hard to find by itself.

  • @jamalzafar6705
    @jamalzafar6705 8 หลายเดือนก่อน +1

    Hey, what screw opener to use to
    Open the kill switch? I am new can you tell me?

    • @NoLimitsNoRegrets
      @NoLimitsNoRegrets  8 หลายเดือนก่อน

      screwdriver? i don't recall. i think those are torx screws, but no idea what size it was offhand.

    • @jamalzafar6705
      @jamalzafar6705 8 หลายเดือนก่อน

      @@NoLimitsNoRegrets my grip broke and i cant do anything about it. I tried finding on web and i found nothing.

  • @throughchuckseyeso_o3771
    @throughchuckseyeso_o3771 ปีที่แล้ว +2

    Where can I buy the new actuator?

    • @NoLimitsNoRegrets
      @NoLimitsNoRegrets  ปีที่แล้ว

      i ordered mine from maxbmw but any bmw dealer should either have it or be able to order it quickly.

  • @SPEEDPRIME017
    @SPEEDPRIME017 ปีที่แล้ว +1

    Já fiz a substituição das 2 peças mais mesmo assim não voltou a funcionar, oque pode ser ?

    • @NoLimitsNoRegrets
      @NoLimitsNoRegrets  ปีที่แล้ว

      my video on troubleshooting everything i could think of for QS is here th-cam.com/video/ze6FsspxBwo/w-d-xo.html

  • @georgepurtseladze34
    @georgepurtseladze34 ปีที่แล้ว +1

    Hello , i have the problem wich cant fixed. I wash my motorcycle and left multifunctional controller stopped working. I bought new one and its still not working. I checked wires and everything looks fine in wires. I checked cluster dashboard and it have some problems inside cause of water. If anyone knows if the cluster is damaged inside cause of the water, it will takes effect to left multifunctional controller?

    • @NoLimitsNoRegrets
      @NoLimitsNoRegrets  ปีที่แล้ว

      i've been washing motorcycles my whole life and i don't think i've ever had an issue from it. Granted, i always let them sit for a while before using them, just in case there is any water inside anything, it can evaporate out and not cause shorts. Most modern bikes are sealed really good though. the switch housing seems more likely to get water in it somehow than the cluster, but i have no idea what might be wrong.

  • @alfarttosiameen8085
    @alfarttosiameen8085 11 หลายเดือนก่อน +1

    the s1000rr its 2012 with the cross control?? how

    • @NoLimitsNoRegrets
      @NoLimitsNoRegrets  11 หลายเดือนก่อน

      i don't quite understand your comment, but i think the '12 model is like my '10 originally was. it has a horizontal QS for upshift, but no blipper for downshift, and i don't think it has the clutch switch in this video either.

  • @kingofkingz5789
    @kingofkingz5789 ปีที่แล้ว +1

    Do you have a part # for the micro switch and the actuator?

    • @NoLimitsNoRegrets
      @NoLimitsNoRegrets  ปีที่แล้ว

      i don't as i already tossed the packaging, but if you go to maxbmw website, they have the complete parts diagram and you can find it there. They have part number, cost, can order right there, and even weight on a lot of the parts. That's where i look for everything, and where i found these parts.