Loving the RC videos mike :) Thanks for the shoutout man. TRX-4 freestyle would be epic! Maybe I could do one too and the viewers can decide the winner? lol
RC FREESTYLE VIDEOS, YES PLEASE!!!!! I saw the freestyle you did with your TRX4 at the end of your newest video and I loved it! My favorite part was the one weel save you did.
Ah yes that motor mount screw falls out all the time on my udr and it sometimes kills gears and it sometimes doesn’t I just put a drop of locktight on it and fixed the problem. My udr is runing 8s now and the thing is a beast I take it to the sand dunes in California all the time as I only live 40min from some dunes. On 8s with paddle tires in the rear only it wheelies at half throttle soo epic! Love the vids keep up the great work 👍🏻
Bronco Monster Truckin’!!!! That’s my bucket list truck right there. Now we all know the bennies of that 2 speed trans on a crawler. VIDEO!!! the UDR on paddles is quite beastly. Can’t wait to see that run too!
Same EXACT thing happened to mine. Lol.. that's why I'm watching your vid. Appreciate you brother. Last trx I had was a rustler. All my rigs now are arrma 6s. Vid VERY helpful so far bro...
hello from canada ! im a plumber who loves rcs ! slowing down here due to everything going on started posting my old phone videos of my rcs ! loving ur content going to work on mine ! u r doing great job ! keep it up we got to keep ourselves occupied not to be preocupied rc is a great way 😎
Well I'm glad to see you're having fun love seeing the RC stuff can't wait for you guys to go back racing always enjoy your videos thank you for sharing be safe stay healthy👍👍👍✌😎
Do more vids dude freestyle. I have the traxxas slash 4x4 and same here changed the pinion and snapped 2 drive shafts so wateing for parts now. I also have the padel tyres for it for the sand. Grate vid keep it rc Tom
Yep, the UDR hiccuped to a stop then went on, but a few minutes later I heard some rattling. I opened up the transmission and found the motor mount screw just laying there all chewed up. I lost several teeth from the pinion and spur gear. Afterwards when I replaced both of them I couldn’t get the grub screw to stick. I used blue and red but had no luck until the last run. The vehicle ran for five minutes then I saw smoke!! I removed the skid plate and viola the entire body of transmission had melted. The issue? Back when the mounting screw fell out it had warped the motor shaft which caused it to wobble so bad it was loosening the grub screw and caused enough friction to melt the transmission. I replaced the motor and all is fine now.
Heck yeah make a video of it. I'm considering buy one myself being that we aren't supposed to be getting out much. Might as well make a track on my land and have fun.
About the motor mount, mine had the same exact issue a few months ago where the screw came loose in it mid run, probably a common thing but it was a simple install a new screw as long as you catch it early enough, just put a new screw in and worked fine afterwards.
I don't have a UDR but I have had bolts back out and cause more damage than the loose bolt or screw did. Try to use a dab of blue threadlocker on anything metal on metal. 👍 I have burned out a few pinions before on my nitro, most likely from not setting the gear mesh correctly or the motor moving slightly after a crash
Aloha Mike!! Have you ever thought about getting a Cen Racing HL150 Monster tuck?? I heard that it's a pretty well balanced, realistic monster truck at an affordable price. It would look pretty sick with the Overkill Body. I plan on getting A HL150 very soon. Awesome vids. Keep um coming. By making these vids You are keeping a lot of our spirits up during these hard times. Please keep you and your family safe!! Take care!!
Heck yeah dude. This stuff Really helps motivate me to keep working on my RC's and to keep going on with life in general. I would be stoked to see more TRX4 freestyle. 🤙
I love the RC content Mike, I wish I had the money to dive into the hobby, I've loved R/C my whole life, but unfornately never have the money to invest into it. Some day though, my sights are set on the Traxxas Bigfoot truck. Unless you have a better recommendation :) Thanks Mike!!!
You need to threadlock those screws that hold the motor to the motor mount or the screws will work loose with such a tourqy motor and will only shrewd your gears. I know from experience lol.
ive had that happen to me before but i caught it before the motor screws came out. its a good idea to stay stock gearing, a bigger pinion mixed with the paddle tires will result in the motor overheating cause the paddles have so much grip. since it has planetary gears it has more torque than it needs with any pinion size. p.s. when its not frozen outside, you should take that udr to a pond and hydroplane across it. the UDR hydroplanes better than any other rc, i have a video of it passing an e-revo 2.0 on the water
Actually more grip will cause less heat in some cases, as then the energy won't be wasted and turned into heat. See you have to make your motor work hard enough, but not too hard.
Loving the RC videos mike :) Thanks for the shoutout man. TRX-4 freestyle would be epic! Maybe I could do one too and the viewers can decide the winner? lol
Yeah man. Sounds good to me
Kevin Talbot hi I love ur vids
RC FREESTYLE VIDEOS, YES PLEASE!!!!! I saw the freestyle you did with your TRX4 at the end of your newest video and I loved it! My favorite part was the one weel save you did.
Bronco monster truck rc free style jam. Heck yeah. Good video mike and good seeing kev on there too
That trx4 GAHDANG SAVE....we need more of that thing
Heck yeah I want to see a video of the trx
Yeah we do. It would be sick
Ah yes that motor mount screw falls out all the time on my udr and it sometimes kills gears and it sometimes doesn’t I just put a drop of locktight on it and fixed the problem. My udr is runing 8s now and the thing is a beast I take it to the sand dunes in California all the time as I only live 40min from some dunes. On 8s with paddle tires in the rear only it wheelies at half throttle soo epic! Love the vids keep up the great work 👍🏻
Bronco Monster Truckin’!!!! That’s my bucket list truck right there. Now we all know the bennies of that 2 speed trans on a crawler. VIDEO!!!
the UDR on paddles is quite beastly. Can’t wait to see that run too!
Definitely rc freestyle would be awesome!!!!!
Im thinking of getting that overkill evolution body.
I think you're Overkill evolution RC would look awesome freestyling in the basement too!
Same EXACT thing happened to mine. Lol.. that's why I'm watching your vid. Appreciate you brother. Last trx I had was a rustler. All my rigs now are arrma 6s. Vid VERY helpful so far bro...
Keep it up and you’ll have that spool back in your monster truck
sweet man good see you keeping up on the videos through hard times
That was a killer teaser. Can’t wait to see you hopefully make a full video on one!
Love my UDR! Next purchase will be an xmaxx. Awesome video!
Need blue locktit not red to keep them from coming loses can't wait see you back in the seat just have fun with the family and your rc
I am so thankful for this channel! my guy please never stop pursuing this!!
hello from canada ! im a plumber who loves rcs ! slowing down here due to everything going on started posting my old phone videos of my rcs ! loving ur content going to work on mine ! u r doing great job ! keep it up we got to keep ourselves occupied not to be preocupied rc is a great way 😎
I'm just west of Ottawa.!
thats crazy we are closer then i taught im 1 hr north of mtrl !
@@johnyrc5216 Drummondville?
no im in st-placide near oka
Nice Vid!! Like the mini Monster Jam Freestyle!! Epic!! 👍👊😎
Well I'm glad to see you're having fun love seeing the RC stuff can't wait for you guys to go back racing always enjoy your videos thank you for sharing be safe stay healthy👍👍👍✌😎
Do more vids dude freestyle. I have the traxxas slash 4x4 and same here changed the pinion and snapped 2 drive shafts so wateing for parts now. I also have the padel tyres for it for the sand.
Grate vid keep it rc
Tom
nice vid thanks for making it. that truck at the end of the vid was cool ill score that a 10 for its freestyle. have a good one.
Yep, the UDR hiccuped to a stop then went on, but a few minutes later I heard some rattling. I opened up the transmission and found the motor mount screw just laying there all chewed up. I lost several teeth from the pinion and spur gear. Afterwards when I replaced both of them I couldn’t get the grub screw to stick. I used blue and red but had no luck until the last run. The vehicle ran for five minutes then I saw smoke!! I removed the skid plate and viola the entire body of transmission had melted. The issue? Back when the mounting screw fell out it had warped the motor shaft which caused it to wobble so bad it was loosening the grub screw and caused enough friction to melt the transmission. I replaced the motor and all is fine now.
Yup cool stuff like to see some more RC jumps and that one get after it with the paddles
Had same issue. Had to replace pinion and spur. No issue since
Sweet moves at the end...i like the freestyle ramps
You would love the Axial SMT-10. An actual RC monster truck. Solid axle and everything. 🖖
Nah, axial yeti xxl all the way man.
I have a UDR and had the same thing happen to me with the motor mount screws came out. Luckily I caught it in time and there was no damage.
Hope you are having fun with your RC car looks really cool if you ask me
The freestyle run is the only thing that's given me have a happy laugh in the last 2 weeks.
Great video! Would be sick to see an SMT10 in that fleet of RC’s!
That montage in the end was great! I for sure want to see more of that. Great job Mikey!
Its a dope ending!
Yes make a vid of your trx! Loving the videos
Nice freestyle!
Awesome bro keep urself entertain while stuck in the house
I don't know much about rc' but I love to learn about em! Now diecasts, that's a different story haha...stay safe dude!
Had to add, love the freestyle teaser man, definitely show more!
You have some cool rc’s 👍
HELL YEA LETS SEE MORE FREESTYLES
Use blue thread locker on the motor mount screws. It will help the motor to hold on.
Thumbs up for the end of the video that was great
Heck yeah make a video of it. I'm considering buy one myself being that we aren't supposed to be getting out much. Might as well make a track on my land and have fun.
About the motor mount, mine had the same exact issue a few months ago where the screw came loose in it mid run, probably a common thing but it was a simple install a new screw as long as you catch it early enough, just put a new screw in and worked fine afterwards.
Hello New RC channel by the best V2Vids 💙
Love the different kind of content!
I love the rc video
Nice wrenching video love the trx4
Great to see
Dude that’s sick!!
the trx4 is so cool
Definitely post that teaser video from the end
I love the R/C video’s Please do more !!!!
watching you freestyle the TRX-4 was like if John Moore handed you the keys to No Problem (before the tube chassis), haha. that was cool to watch.
I don't have a UDR but I have had bolts back out and cause more damage than the loose bolt or screw did. Try to use a dab of blue threadlocker on anything metal on metal. 👍 I have burned out a few pinions before on my nitro, most likely from not setting the gear mesh correctly or the motor moving slightly after a crash
would love to see make a video of it, thinking about getting a traxxas rc truck not sure what to get though i just spent money on a custom PC build
Like the wrenching vid
Awesome job keep it up love it
Yea its to nice to take to skate park 😁. I'd like to see u doing some work on your home 👍
Awesome video!
Definitely keep up the good work buddy. And if you need other parts let me know.
Thanks man much appreciated.!
Keep up the rc vids man I love it
Aloha Mike!! Have you ever thought about getting a Cen Racing HL150 Monster tuck?? I heard that it's a pretty well balanced, realistic monster truck at an affordable price. It would look pretty sick with the Overkill Body. I plan on getting A HL150 very soon.
Awesome vids. Keep um coming. By making these vids You are keeping a lot of our spirits up during these hard times. Please keep you and your family safe!! Take care!!
Love the vid, keep up the good work!
best part of your video was at the end
Wow bronco goes front flip I think or backflip I love it
Had the same issue with the motor mount screw the hole on the motor was stripped out from factory had to send it into Traxxas to get a new motor
I love that truck best truck Traxxas has👊✌️
Heck yeah dude. This stuff Really helps motivate me to keep working on my RC's and to keep going on with life in general. I would be stoked to see more TRX4 freestyle. 🤙
Awesome 👍👍
Nice vid man
You don’t even need to remove on the trailing arms. Just fully extend the rear shocks and the shaft will come off the rear planetary
It doesn't. Or I wouldn't have done that.
2nd comment baby. Mikey ur videos are the best. Each time I finish 1 video I can’t wait for the next
Oh Man!! Those Thangs are as pretty as a...as a....well, theyre just nice.
I love the RC content Mike, I wish I had the money to dive into the hobby, I've loved R/C my whole life, but unfornately never have the money to invest into it. Some day though, my sights are set on the Traxxas Bigfoot truck. Unless you have a better recommendation :) Thanks Mike!!!
Love the RC content.👍
Nice skills
When you swap the pinion next replace the front centre drive shaft to a GPM, D-Hawk, Hot Raing or Vitavon one
Keep up whith those good videos😉
Typical monster truck driver, landing upside down on your lid lol... great vid I enjoy it
I need to get me one of these
Awesome video. Would love to see your bronco do some freestyle.
Awsome
I really appreciate you making these videos, but man.... I can’t wait to see Overkill in action again!!!
You need to threadlock those screws that hold the motor to the motor mount or the screws will work loose with such a tourqy motor and will only shrewd your gears. I know from experience lol.
bro you did a awesome job on this rc video bro
I like it
Heck yes make the video
ive had that happen to me before but i caught it before the motor screws came out. its a good idea to stay stock gearing, a bigger pinion mixed with the paddle tires will result in the motor overheating cause the paddles have so much grip. since it has planetary gears it has more torque than it needs with any pinion size. p.s. when its not frozen outside, you should take that udr to a pond and hydroplane across it. the UDR hydroplanes better than any other rc, i have a video of it passing an e-revo 2.0 on the water
Or just threadlock motor mount screws. 🙄
Actually more grip will cause less heat in some cases, as then the energy won't be wasted and turned into heat. See you have to make your motor work hard enough, but not too hard.
I like the Trx4 what motor are you running in it
Just a stock brushed on 3s
More freestyle 👍🏻👍🏻👍🏻👍🏻
Amazing video. Can you maybe make a video on the traxxas maxx plz
Hahahahaha epic, I do just that with my axial Jeep, moon walk sweet. Be safe mizta.
What made you get the udr and what is your all time favorite rc you have
You should put lock tight on most of the screws
You mean the ones that go in metal? Never put that stuff in plastic.
Please do a trx4 freestyle video!!!
🔥🤜🤛🔥👍👍🔥
Were you find the tires I can't find any for my mojave
What doesnt Kev beat on?
That bit at the how the hell?
I dont see s single scratch on the under carriage. Has this truck been driven?
Yeah I've driven it a bunch but I got it in November so its only seen snow.