Wall Repairs After Chimney Removal | THE HANDYMAN |

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ธ.ค. 2024

ความคิดเห็น • 53

  • @jordanalvey927
    @jordanalvey927 ปีที่แล้ว +8

    Straight up dying over here about the "is that a drill" comment. Literally just got in an argument with my wife and daughter about the proper name for my IMPACT DRIVER. Also just put in my notice at work. Going out on my own 11/10/23. Thanks for always encouraging!!

  • @kyle3045
    @kyle3045 ปีที่แล้ว +4

    A grinder always helps me alot when going through that lathe. Especially when I can see the other side like this it saves them pricy multitool blades

  • @rok1341
    @rok1341 ปีที่แล้ว +5

    You should put a fake treasure map in the wall cavity

  • @peterwest323
    @peterwest323 ปีที่แล้ว +2

    I use the corner/edge of the blade to cut through old plaster. Works well for me. Once the mesh is exposed, if there is any, use the teeth. In my 90 year old house, most of the walls were pure plaster and lath and the only mesh I found was from a partial kitchen renovation done in the 50's or 60's - that's where I found all the dangerously hacked (and hidden) electrical work too.

  • @JREfunnies
    @JREfunnies ปีที่แล้ว +2

    I always go for a real tight fit too.

  • @918scott
    @918scott ปีที่แล้ว

    RE: Spanish mac vr Skip trowel at 12:10.... We call it Skip trowel here in AZ too.

  • @batbawls
    @batbawls ปีที่แล้ว

    8:29 good old wall mayonnaise

  • @derekszyszka
    @derekszyszka ปีที่แล้ว +10

    I've been trying to find the secret TH-cam channel for months :(
    Love the videos!

    • @wwardak
      @wwardak 6 หลายเดือนก่อน

      Same here, is there really a secret channel or he is just kidding? If it's real, please post a link so that we could subscribe.

    • @derekszyszka
      @derekszyszka 6 หลายเดือนก่อน

      @@wwardak It's likely an engagment bait tactic and the channel doesn't exist.

  • @rrh220
    @rrh220 ปีที่แล้ว +2

    You're such a tease with these short little videos! 😉

  • @Lincoln_Hawk
    @Lincoln_Hawk ปีที่แล้ว

    Number 1 in the world!

  • @natechandlerjr2744
    @natechandlerjr2744 ปีที่แล้ว +4

    Handyman...put on some safety glasses man so you won't have to squint so hard lol. Great content!

  • @know-a-guy
    @know-a-guy ปีที่แล้ว

    Nice Spanish mackerel finish. Around here we call it unacceptable. Take it easy Handy! Handyon.

  • @michaelplays2449
    @michaelplays2449 ปีที่แล้ว

    Great video !!

  • @JREfunnies
    @JREfunnies ปีที่แล้ว +2

    I found and sub the super secret third channel. I'm not saying what it is. So don't ask. Keep up the good work handy.

  • @Dan-ot2ry
    @Dan-ot2ry ปีที่แล้ว +5

    Whats the third super secret channel? I want to subscribe to you over there.

  • @arnoldgood8634
    @arnoldgood8634 ปีที่แล้ว

    I miss seeing you with a beard! It looked great in my opinion!

  • @mr.jitters6531
    @mr.jitters6531 ปีที่แล้ว

    I hate that diesel can.
    Good video though. 😀

  • @jimc.964
    @jimc.964 ปีที่แล้ว

    Link for the bit in your impact?

  • @5eyes1294
    @5eyes1294 ปีที่แล้ว

    You spelled "skills" wrong in your headline. Love the videos.

  • @AdamS-lh2ug
    @AdamS-lh2ug ปีที่แล้ว +2

    I did a whole house demo of plaster and lath, as an electrician because I chose a bad company to work for 😂. I don’t wish that hell on anyone.

    • @jimkane9832
      @jimkane9832 ปีที่แล้ว

      I did a whole house demo on a 5 bedroom house that I thought was going to be easy because it was drywall. It turned out to be drywall over plaster with metal lath that was over the original plaster with wood lath. Luckily I was still hourly at the time.

  • @capn.c5321
    @capn.c5321 ปีที่แล้ว +1

    I can't cut drywall straight to save my life 😂

  • @EastRiverHomestead
    @EastRiverHomestead ปีที่แล้ว

    Spanish Mackerel? Wha? You said what it meant, but never heard that term. Too funny. Would love to find out how that started.

  • @targetedfordeath359
    @targetedfordeath359 ปีที่แล้ว

    What is DRYWALL ?

  • @JoJoTavern
    @JoJoTavern ปีที่แล้ว +1

    I can't believe some people's dont know what an impact driver is / Makita is best

  • @douglasthompson2740
    @douglasthompson2740 ปีที่แล้ว +1

    FYI: Impact drivers are meant for drilling. That is why they make special drill bits with a hex shaft. Very handy but it is not as efficient as a drill if you are going to be doing a lot of holes. You can buy sets of the hex shaft drill bits (generally also have a shorter flute section). Makes it easy to carry a selection in your tool belt.

    • @TheHandyman1
      @TheHandyman1  ปีที่แล้ว +2

      Those bits you are talking about are for a quick connect adapter that goes on a real drill. NOT an impact driver.

    • @douglasthompson2740
      @douglasthompson2740 ปีที่แล้ว

      The ones I have are rated and labeled for impact use. I have been using tools since before your parents were born.

    • @TheHandyman1
      @TheHandyman1  ปีที่แล้ว +1

      That's hilarious.

  • @MikeM-bi5ot
    @MikeM-bi5ot ปีที่แล้ว

    We had old alcoholic master/ licensed plumber, electrician, carpenter, contractor, professor of engineering inform me you don’t use impact drivers in home construction, that is for working on vehicles. I upset him when I informed him that I wasn’t a professional, I was just hired to come in behind you and fix your screw ups. Lol

  • @dreamingofsailing757
    @dreamingofsailing757 ปีที่แล้ว +3

    How many screws did you
    Munch on during this job?😂

  • @shanewarren7567
    @shanewarren7567 ปีที่แล้ว

    I prefer to drywall with an oyster perpetual

  • @MyDIYAdventures
    @MyDIYAdventures ปีที่แล้ว

    OMG Handyman! Why did you abandon your family???😂

  • @paulgrice6766
    @paulgrice6766 ปีที่แล้ว

    What is the super secret third channel

  • @fmradio42
    @fmradio42 ปีที่แล้ว +1

    I too want to know how to subscribe to your 3rd channel.

  • @oldnstillworkin5709
    @oldnstillworkin5709 ปีที่แล้ว

    That wire lath is the worst!

  • @oldnstillworkin5709
    @oldnstillworkin5709 ปีที่แล้ว +6

    What happened man?!?! Thought you had a family. I hope everything is ok with you personally.

    • @TheHandyman1
      @TheHandyman1  ปีที่แล้ว +15

      I do have family. Its elk season. I spend every September and October hunting. They are home.

    • @beanieweenie9543
      @beanieweenie9543 ปีที่แล้ว +2

      @@TheHandyman1ah one of the many many great pros to being self employed, I spend every November, December and January at the deer camp with the the exception of thanksgiving and Christmas Day! Good luck this season!

  • @myhermitlife
    @myhermitlife ปีที่แล้ว +1

    🤘🤘🤘

  • @brandonjensen5292
    @brandonjensen5292 ปีที่แล้ว +1

    Where’s the fam? Back home?

    • @edflower
      @edflower ปีที่แล้ว

      I wondered the same thing.

    • @TheHandyman1
      @TheHandyman1  ปีที่แล้ว +2

      I do have family. Its elk season. I spend every September and October hunting. They are home.

    • @brandonjensen5292
      @brandonjensen5292 ปีที่แล้ว

      @@TheHandyman1 enjoy!

  • @markarita3
    @markarita3 ปีที่แล้ว

    10:20 you're welcome ;-)

  • @abdullaahibnabbas3745
    @abdullaahibnabbas3745 ปีที่แล้ว

    Their are people with a lot skills but lack safety for themselves and other people around them.

  • @artimus7525
    @artimus7525 ปีที่แล้ว +1

    South Park brought me here.

  • @meyer629
    @meyer629 ปีที่แล้ว

    Sills?? Or Skills......Lolol

  • @chrisnguyen5922
    @chrisnguyen5922 ปีที่แล้ว

    Handyman, i am concerned about your well-being. Please wear PPE. Thank you