Step By Step || Installing & Activating Daly/Deligreen 4S BMS
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- In this video, we show how to connect a Daly/Deligreen 4S BMS to our EnerAmp 170Ah 3.2V LiFePO4 Cells and hook it up to an inverter.
You can buy BMS's like this on our website at currentconnect...
✅ Our Top Pick LiFePO4 Batteries by Voltage & Capacity: 🔋
1️⃣2️⃣V Batteries: 🔋
▪️ Epoch Essentials 105Ah Battery - www.currentcon...
▪️ Epoch Essentials 300Ah Battery - www.currentcon...
▪️ Epoch Essentials 460Ah Battery - www.currentcon...
▪️ Epoch Pro 460 Ah Battery - www.currentcon...
▪️ EG4-LL 400Ah Server Rack Battery - www.currentcon...
2️⃣4️⃣V Batteries: 🔋
▪️ EG4-LL 200Ah Server Rack Battery - www.currentcon...
▪️ EG4 LifePower4 200Ah Server Rack Battery - www.currentcon...
4️⃣8️⃣V Batteries: 🔋
▪️ EG4 LL-S 100Ah Server Rack Battery - www.currentcon...
▪️ EG4 LifePower4 100Ah Server Rack Battery - www.currentcon...
▪️ EG4 Indoor WallMount 280Ah Battery - www.currentcon...
▪️ EG4 PowerPro Outdoor WallMount 280Ah Battery - www.currentcon...
✅ Our Top Pick Inverter/Chargers by Voltage: ⚡
1️⃣2️⃣V Inverters: ⚡
▪️ Victron 12V Quattro-II 3kVA 2x120V - www.currentcon...
▪️ Victron 12V MultiPlus-II 3kVA 120V - www.currentcon...
▪️ Victron 12V MultiPlus-II 3kVA 2x120V (UL Model) - www.currentcon...
2️⃣4️⃣V Inverters: ⚡
▪️ Victron 24V MultiPlus-II 3kVA 2x120V - www.currentcon...
▪️ Victron 24V MultiPlus-II 3kVA 120V - www.currentcon...
▪️ Victron 24V Quattro-II 3kVA 2x120V - www.currentcon...
4️⃣8️⃣V Inverters: ⚡
▪️ Eg4 3000 EHV-48v Inverter/Charger - www.currentcon...
▪️ EG4 6000XP Off-Grid All-in-One Inverter/Charger - www.currentcon...
▪️ MidNite Solar Rosie 7048RE 7000W Inverter 120Amp Charger - www.currentcon...
▪️ MidNite TheOne - 11.4kW Hybrid All-in-one Inverter - www.currentcon...
▪️ EG4 12kPV 48V 8kW Hybrid All-In-One Inverter - www.currentcon...
▪️ Sol-Ark 15kW All-In-One Hybrid Inverter - www.currentcon...
▪️ EG4 18kPV | 48V 12kW All-in-One Hybrid Inverter - www.currentcon...
FTC Disclosure Statement:
Some links on this TH-cam channel may be affiliate links. We may get paid if you buy something or take an action after clicking one of these.
![CAMPปลิ้น | EP.82[1/2] แก๊ง 3 สาวเพื่อนซี้บุก CAMPปลิ้นครั้งนี้ห้ามเสียอาการ](http://i.ytimg.com/vi/_6WUjXHe1TM/mqdefault.jpg)
Great video. But i would recommend to tel the subscribers that you should ALWAYS top balance the cells 1st before connecting the bms. I myself have burned 2 daly bms because i did not top balance my cells.
Nonsense
How do you balance each cell? Can it be done by connecting a charger to each cell until they are charged?
When you setup a BMS balancer cables, they all go on negatives with the exception of the last one that goes to positive. Balancers only balance by the negative cable. Will be better to explain that goes to B0, B1, B2, B3 and B+. Nice video.
Please 🟥 What is the "zero drift current calibration" (on the last page of the App of the Daly BMS) ? Thank you
HOW about the software setup and all the setting the physical setup is nothing
its the app and setting that's what would be good since this China product leave you on your own and DOESNT send any paperwork warranty or anything but the unit in box is really subpar to leave the customer hanging
Здравствуйте! bms Daly 4s12v250 am подскажите если напряжение с bms 9.45 а на батареи 13.2
Между b- p- -3.07
Замыкание b p не даёт результат.
Зарядка тоже нет результата.
Зарядка под нагрузкой инвертора и замыкание b p тоже нет результата. Возвращает напряжение 9.45 как только зарядку снимаю.
(Балансировочные провода с bms
Подключены верно)
Как запустить bms Вы знаете ? Буду благодарен.
Hey buddy good job man so hard to find a simple direct short to the point directions and the activation tip to turn bms on is sooo criticall for newbees like me 😊😊😊😊😅😅?!.,
I don't get the point of shorting electronic devices. I have same BMS not short circuit needed to activate.
Are there any other tips if bms still won't work after these steps please? 😢
Hi and thanks for this useful video !
I wanted a battery with the best BMS, so I chose one with a Daly Smart BMS 4S 12v200A (with bluetooth).
But the battery can't charge.
So I opened it. And I saw that one connector was the wrong size. It's the connector with 4 red and 1 black.
When I connected it correctly, the battery screen was finally on (68% of charge).
But the battery still not charging. And no bluetooth.
To initiate the BMS, I tried to connect P- and B-, and the charger turned ON. But when I stop connexion P-/B-, the charger turns OFF.
Do you think the BMS is dead ?
Excellent video and very clearly explained in brief. We connected the balancing terminals to batteries, NTC is connected. We shorted the P- and B- terminals and tried to switch on the supply of 60V for a 52V Li-ion battery, 100 AH for around 6seconds. Still we are unable to charge the batteries through Daly 16s BMS. Any inputs please.....
No current is supplied to batteries, meaning the BMS is not allowing the batteries to charge.
Ditch the annoying background noise.
When i was wiring my bms i measured the voltage of the battery and it was 54.0 volts (13s battery)
then i connected the bms wires, everything was fine, 1 =4,15 2= 8.3 and so on, but when i soldered the b- to the - port of the battery and measured the b- port and the + port of the battery it showed me 25.5 volts... i dont really know why... maybe you can help`?
I noticed when the voltage of BMS is lower than battery voltage? The BMS is not turned on. Must have charge current on, after shorting B- P-, try pushing the blue tooth dongle switch, was also told you can try to run a jumper from pins 1 to 3 where the light board plugs in. I'm guessing the light board has a momentary switch that acts as an on off switch. Instructions are horrible from Daly.
Na my daly BMS still want turn on!!!
What kind of inverter charger is that
Hello... I am currently in the process of connecting a 200 amp Daly bms to a 340 ah battery bank that is connected in a 2p4s configuration. I had the same issue as you where the voltage of the P- wire was around 9 volts where as the battery bank is 13.20 volts. Is that normal ? According the to Daly instructions the voltage at the P- wire is supposed to be the same as the B- wire.
Apply charge current to P- after checking to make sure your NTC probe is plugged in.
@@CurrentConnected So 14.4V from a bench charger will work? How many amps are necessary?
I've done all these are steps and can't get the BMS to wake up. Could the temp sensor calibration be a reason that it's not waking up? It was 36 F outside during my attempt. My inverter powered up with a load but when I removed the bypass jumper between B- and P- it shut down. BMS app isn't seeing BMS. Voltages on balance leads are good. Temp probe and uart Bluetooth connected securely.
Turned out with this older unit I needed the light board with it's switch
I am having this issue can you help me? What light board?
Thanks for this info!@!
Question. I hope you or someone can answer. If I have an inverter and charger... where would they hook up in relation to this set up?
Dude, THANK YOU. I was losing my mind trying to get this to work, but the one tiny detail you mentioned about how it won't turn on without the temperature sensor was the one bit of information I was missing. Really clear and to the point guide - you saved my butt!
Excellent video, thank you.
Glad you liked it!
Really informative video!
Let me ask one question. After connecting the inverter, you touched P-. I'm not sure what is the purpose of this touching.
It allows the inverter to turn on and kick into "charging" mode, if the charger didn't see battery power it wont turn on. Then, when I stop touching them the power is re-routed through the BMS to activate it.
How often will I have to “turn on” the bms? Every time I reconnect to a load?
it's not deli it's Daly
Hi, I have a brand new DeliGreen 8S 24V 150A, and then follow exactly the same steps as on your video, but NO SUCCESS, I repeated it again and again, still with no success. Tried some other ways (checking the resistant between B- and P- to get 0 Ohm, also did not success, never get 0 Ohm, always showing somewhere around 300 Ohms). The BMS still won't activate. My battery is around 26.74 Volt, is this voltage too high for the charger? I have tried to charge it with 30V, but still no success. Can this be a faulty BMS? How many volt should I charge the battery, if the battery is still having 26.74V. Is 30V charger not high enough, to activate the BMS? In may case, on the last steps, if I unplug again the power from the grid, then the inverter will switch off and will not take the electricity from the battery... (because BMS is still not active = B- to P- still has around 300 Ohms).....
Did you plug in the NTC Probe?
I have a bad 4s12v Daly BMS that has the exact symptoms yours does. I tried for a hour to “wake” to no avail. I also made sure everything was connected .I.e. temp probe. Solar power is not a poor mans sport. Buying a new high quality BMS would add 6 months pay off time to my DIY system. SUX
Same shit here guys, did you find a solution?
We tried a Daly LiFePo4 8S 24V 100A BMS with a Epever UP3000-M6322 nothing no lights on so ordered another unit assuming it was dead. The trick of shorting the B- P- together briefly did it so we now have two Daly BMS's short spark when shorting but expected that now I need to adjust Epever setting as I had lead-acid leisure batteries before. Thanks for the hint
How would this wire up with a 4S 2P? You don't need two BMS for that do you?
Can you "wake up" the BMS using power from the Solar Charge Controller?
Yes, but this only works with Victron Solar Charge Controllers.
@@CurrentConnected I have a Renogy Rover 40am MPPT Charge controller now. So if I connect it to the battery bank after all these other wires are connected for the BMS, will that damage the BMS?
Hello, I have a question. Why do you touch briefly the P- to B-? If you do not, the BMS will not start at all?
It is to get powered inverter so it can start in charge mode
@@CurrentConnected thank you
How much ampere of current is needed to activate daly 8s 100 amp bms
Excellent info….overhead cam would be nice for the connections.
Sir what bms im going to used for my 8 pcs 12 volts - 100 ah lifepo4 battery bank
Hi nice video ...i need a help i have online UPS which requires 192v to run which bms i should use for such pack ...i googled i came with information of can bus bms ... But i can't understand it properly ...can you make video on that
What's the size of the BIG red cable you connected on the last positive? What size do I need for 280 AMPs? Thanks!!
On the Cell Characteristics on my deligreen bms should i set the Rated Capacity to my lifepo4 cell 202ah.
Or 100ah as rated capacity.
Please advice.
i activated the bms by charging the battery and bms. Then i could find the Bluetooth connection in the Phone.
but now a few hours later i cant connect to the bms with the Phone.
Do I have do activate it everytime to connect to my Phone?
If I have 2 24v packs that I want to connect in parallel. Do I need 2 bms and how do you wire up. Thx
Thank You from me too! I was trying to get my system going as well but the instructions were in Chinese. I purchase the touch screen display as well and nothing worked! I will give it another go with the info you have provided!
This is a great video of a simple setup, however I am stuck on the part as to where my solar charger comes in. I do not have a all in one charger and inverter. How should I wire the solar charger to my BMS and at what terminals on the battery pack? Do I just use the same terminals on the battery pack that my inverter is bolted down with?
Thanks for this video. Very straight n concise.
👍👍
Do you need to leave the mains on to charge the batteries up for the first time ?
Hello, I have a siliar situation, my charger does not recognize the battery, it marks an error because it detects too low a voltage. Can I connect B- with P-? That can activate the BMS without connecting the charger yet? Thanks.
Connect the charger to P-, touch together P- and B- so the charger sees voltage and activates, then once the charger starts up stop touching together B- and P- and the charger will continue charging, and it also will already have woken up the BMS.
Does the low temperature cut off on the Deligreen BMS actually work, as i know alot of the Daly ones don't and are advertised wrong? Brilliant video
Thanks for the video dude really easy
Great video. After watching it I bought a 50a version of the same bms but after setting it up I notice that all it does is monitor the state of charge and temperature essentially. it does not balance the cells and does not cut the charge current when it hits the overvoltage protection level. does it require additional configuration for it to run properly?
czy możesz podać link do takiej ładowarki
thank you.now it works perfectly!
Thanks for the nice video. Could you please tell me the maximum balancing current of this BMS?
What is the default low temp disconnect value? I have heard -7c is that correct? Is that a good number for LIFEPo4 Chemistry? Have you had any luck updating the low temp value through the bluetooth app?
To my knowledge, updating any parameters through bluetooth is not possible, but they certainly can be changed through the USB-UART cable. The low-temp setpoint has various that typically are out of whack and require programming through a computer.
Thanks so much it is now working
A really well-made video. To the point and no wasted time. Really helpful. Thankyou.
Glad it was helpful!
Those ring terminals with shrink wrap would be super helpful!! Cannot find them here in the Philippines.
There are loads on Lazada.
Great Video! Straight to the point. I am curious though. I would like to put my 200Amp Daly Bms inside of an enclosed battery box. Does anybody reading this have any real world experience with heat from the BMS. It looks like it is intended to have air over it?
They barely ever get warm, even with sustained heavy loads. Unless you are getting to 300a+ levels, you really don't need much airflow.
very well done thanks
Great video. Quick and to the point 👍
I saw that you connected the AC side of the Inverter. Was that to put load on the inverter or was that for charging?
It was to send charge current through the BMS to "wake" it up.
Nice video. Where did you get that bms? I can’t find any Daly with a low temperature disconnect. Edit: I see you have a store.
Yes and yes
this is a great, concise, short and sweet how to video! You’re the best!
Hi All
Just joined the group,
I have a question about the Dali BMS if anyone can maybe assist please.
I have connected my Dali BMS to 14s Lithium ion pack I put together.
My question, wat type of charger do you connect to the charging port to charge the battery pack. I am not sure if the BMS will take care of the charging (constant current/constant voltage) .Do it need a special Lithium ion charger or just a DC power supply.The DALi wire diagram and wiring instructions do not specify anything.
Thanks in advance
Regards
Hein
You need battery charger for 14s LiFePO4 battery.
www.aliexpress.com/item/1005002389428499.html?spm=a2g0o.productlist.0.0.1e27313eBGNiaW&algo_pvid=a98dfded-63e7-40be-96b0-6fa2770444c8&algo_expid=a98dfded-63e7-40be-96b0-6fa2770444c8-1&btsid=0b0a556616212030613036808ebf03&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
This is just an example. I'm not sure this charger is good or bad.
Simple and too the point. Perfect. You rock brother. Subbed.
Awesome, thank you!
Thanks you short , sweet , and informative, not like others they go on till one falls sleep. Well done mate
Thanks for the kind remarks!
Good evening CC... I have an unrelated question that you may wish to answer..? I have two solar generators and would like to power both at the same time using one 180 watt solar panel (instead of a separate for each).. Realizing that the sogens cannot be connected together in any way, my solution would be to provide the necessary branch mc4's for each sogen and isolate each branch with an inline mc4 fuse which already has the diode built in to prevent vdc back charging. Your thoughts..??
I think one unit will pull down the voltage to reach maximum power point, then the other unit would fight with the first unit. Your best bet is to try and feed the solar into one generator, then plug the ac power input from the second one into the first one. Try at your own risk, but I don't think your idea will work very well.
@@CurrentConnected I know of the normal way to connect two sogens. But, I would use the vdc blocking diodes (already built into the inline fuses) to prevent vdc from being fed back into each leg of both positive leads of the two mc4 branch legs so that vdc cannot be swapped across the branch, the same as bms does between the solar panel and battery, or solar panel into a sogen....
excellent video. to the point. why is your head so big?
Thank you for your kind comment! As far as the size of my head - That's a great question that I really do not have the answer to.
@@CurrentConnected again, great work. the world needs people who know how to communicate with high information density, in concise manner.
Great simple demo; what is the cable AWG gauge on your BMS?
Thank you, sir.
balance leads are very small, around 22 awg. The main power leads are 2awg high-temp silicone wire (200deg. C rated) on this model.
@@CurrentConnected does it come with the main power leads? I don't see it included in pictures on aliexpress
Great video, thank you. Just received my 200a BMS this will be a great help to get everything wired together and running correctly.
does it come with the main power leads? I don't see it included in pictures on aliexpress
@@littlebill2601 it does come with the main leads and balancing/cell voltage leads. I ordered mine from the current connected store and it also came with the Bluetooth module, hardwired to USB connector and the temperature sensor. Also the gentleman who runs the store is excellent, would highly recommend buying from him.
That was perfect and well explained Dude keep going... 👍
Glad you liked it!
Even better than folding those fine wires, you should apply Ferrules to them appropriate to the wire gauge, then crimp the ferrule in the ring terminals. Much stronger. Ferrules should be used on all wires that are compression fit for a grab, instead of on bare wire.
I just did my Daly BMS wires and the ferrule/terminal method worked great to where the heat shrink on the terminal grabs the plastic of the ferrule.
neat trick
the complete disregard for any safety in this video is truly scary, anyone with zero experience handling batteries seeing this video will think there's zero danger and that everything shown here was safe. Too bad the dislike button does nothing now, this video might cause people to die.
How do you figure???
@@CurrentConnected what?