I programmed my Digi key remote as shown above, but now my gate only closes half way and when I open it again, it bang really hard when it reaches the end - help!
Do I follow the same procedure to programme a ET blue mix remote to this receiver? Client has 2 of these programmed in already. Tried on both frequencies but sumhow it doesn't learn. What could I be doing wrong?
as I schedule a nova brand control of a residence of several controls since I lost control and I want to program a new one I would like to see a video of his own explaining as the card engine in my residence is different from video grace my brother hope your video and response
My sherlo remote isn't picked up when trying to set it on my centurion motor? I get to the point where it says press remote but it never beeps in acknowledgment. I know sherlo remotes can be programmed as every other remote at our house is sherlo. Please help!
Hi friend, I emailed centurion and they said use a key. You must put it on the J1 and centre and form a bridge. The light will come on. Then press the remote once and the light will flash. Then you remove the key and press again and the gate or garage will open. It really worked for my green remote as well.
Thank you very much. Very helpful indeed. Power stuff!
Copering to Centurion official You Tube explanation, this explanation is an eye opener ! Thank you !
Thanks! it was perfectly explained and made the setting up of my remote a breeze. Well done!
Thanks a lot BOET, your video helped me to code my remote in a few seconds!!! God bless you richly! Rowan from Pietermaritzburg South Africa.
Baie baie dankie! Ek voel soos 'n yster nou 💪
Thanks very helpful,piece of cake when it is explained so well
Very helpful thank you
Thank you, your video was very helpful.
Great video, guys! Well done.
I needed this, thanks so much!
Thanks, very helpful :D
very helpful cheers
How about if the jumper LED is not turning on at all?
I programmed my Digi key remote as shown above, but now my gate only closes half way and when I open it again, it bang really hard when it reaches the end - help!
Do I follow the same procedure to programme a ET blue mix remote to this receiver? Client has 2 of these programmed in already. Tried on both frequencies but sumhow it doesn't learn. What could I be doing wrong?
How do I add a remote to my D5 smart gate motor
as I schedule a nova brand control of a residence of several controls since I lost control and I want to program a new one I would like to see a video of his own explaining as the card engine in my residence is different from video grace my brother hope your video and response
how do i master reset the gate motor, so that it has no remotes in its menory >
Muy bueno soy walter electrónic san Cristóbal Venezuela
Bom video
Is there another way to program without the Athena
Also interested.
what if i lost a master remote
My sherlo remote isn't picked up when trying to set it on my centurion motor? I get to the point where it says press remote but it never beeps in acknowledgment. I know sherlo remotes can be programmed as every other remote at our house is sherlo. Please help!
Tyson Red Locate small box receiver and press learn button once Press Sherlo button of choice twice Press learn button on receiver
what if its not picking up my remotes?
Hi. How can i delete the remote?
I cannot find the black jumper ?!?!!!!
Nao tou santifeito so concigo programar um remoto
If one doesn't have a jumper?
Hi friend, I emailed centurion and they said use a key. You must put it on the J1 and centre and form a bridge. The light will come on. Then press the remote once and the light will flash. Then you remove the key and press again and the gate or garage will open. It really worked for my green remote as well.
What if the light does not flash when you press the remote?
Nao tou santifeito so concigo programar um remoto