Thanks for the video, Robert. I like your tip to turn the wheels backwards to keep the mower deck off the support lift. I have the small HF atv/mower lift that has worked fine for my Ferris 52" zero turn. I recently bought a new Hustler 72" mower and its too heavy for the lightweight lift I have. It looks like your Bad Boy may be quite heavy similar to my Hustler, so I believe this lift will work for me. The wheels saddles can be adjusted to fit my wheel base as well. If you agree, I think this lift will work for my Hustler.
@@robertmalensek5736 I did buy this HF heavy lift as discussed. It lifts my Hustler 72" zero turn with no issue, so I'll also use it for my Ferris 52" and Honda Rancher ATV making this a very versatile product. I turned the mower wheels backwards like you showed so the H frame doesn't contact the mower deck....works like a charm. Thanks again!
Just got the BB magnum this weekend and couldn't be happier. And thanks youtube for saying on my purchase so you could make recommendations for channels like this!
Thanks for the video and for wearing sandals I’ve never seen so many people flip out about sandals. When pulling a mower in a garage forward 3ft is dangerous you know we live in a pampered society
It is flexseal tape I stuck it on there so the grass wouldn't wear the paint and to keep water from going down between the deck and the extra metal welded on the to maybe stop rust.
@@BlueLineRacing-dp1pp so most of the weight is of The rear as the motor is there. Guess it would depend on how much weight you have added on the front
I have a 2020 bad boy rebel with the 36 hp vanguard and I’ve been using it commercially since last May there were some complications with the dipstick seal got a little bit loose which threw off the compression which made me lose some oil but once that was fixed it’s been holding oil perfectly. Show that was kind of just a rare problem what do you think of your rouge? Jesus bless y’all.
I wish you could have showed how this folds up. The is nothing I have seen in the instruction manual about how to do this or even if it can be done. That thing takes up way too much floor space when it is not in use.
I would use jack stands after I raised the mower. I don't trust lift jacks. If a lift jack loses pressure and you're under the mower, goodbye Charlie. You can place the jack stands under the square bar holding the tires.
Looking for a Jack for my Brand New SCAG Turf Tiger II. Great vid,,,thank you. Please redo this awesome video with work boots on. May be sending an unsafe message. Thanks just the same.
If sandals are an unsafe message then you better not take it outside either in case you get struck by lightning. He isn’t jump off it with the blades running or weed whacking he literally moved it forward 3ft and jacked it up.
lol, he has tough feet, I on the other hand do not :). But he kicked the tire with his heel, feet get stronger if you use them barefoot, my cousins could run bare foot on poinitng rocks.
Thanks for the video, Robert. I like your tip to turn the wheels backwards to keep the mower deck off the support lift. I have the small HF atv/mower lift that has worked fine for my Ferris 52" zero turn. I recently bought a new Hustler 72" mower and its too heavy for the lightweight lift I have. It looks like your Bad Boy may be quite heavy similar to my Hustler, so I believe this lift will work for me. The wheels saddles can be adjusted to fit my wheel base as well. If you agree, I think this lift will work for my Hustler.
Yea is a heavy built lift and should work well for your mower
@@robertmalensek5736 I did buy this HF heavy lift as discussed. It lifts my Hustler 72" zero turn with no issue, so I'll also use it for my Ferris 52" and Honda Rancher ATV making this a very versatile product. I turned the mower wheels backwards like you showed so the H frame doesn't contact the mower deck....works like a charm. Thanks again!
@@starshooter1003 what did that lift run you? If you don't mind me asking please.
Just got the BB magnum this weekend and couldn't be happier. And thanks youtube for saying on my purchase so you could make recommendations for channels like this!
Nice I see on my FB page them are good mowers
Thanks for the video and for wearing sandals I’ve never seen so many people flip out about sandals. When pulling a mower in a garage forward 3ft is dangerous you know we live in a pampered society
People would flip out watching me do yard work in my Reef sandals🤣
I can’t find any videos on where to jack up the rear to take the tires off
That jack has an adjustment screw that controls pedal return.
rogue not rouge on video title. great video!
On your lawn more around the front of the deck there is a black 3 inch something what is that around the front of your deck?
It is flexseal tape I stuck it on there so the grass wouldn't wear the paint and to keep water from going down between the deck and the extra metal welded on the to maybe stop rust.
Would sure love to see a mowing video of that rogue in action
Legion Lawn Care he has one not long, maybe he can do a longer one
But will it work with counter weights? My Bad Boy weighs about 1100lbs with the added weights
@@BlueLineRacing-dp1pp so most of the weight is of The rear as the motor is there. Guess it would depend on how much weight you have added on the front
I have a 2020 bad boy rebel with the 36 hp vanguard and I’ve been using it commercially since last May there were some complications with the dipstick seal got a little bit loose which threw off the compression which made me lose some oil but once that was fixed it’s been holding oil perfectly. Show that was kind of just a rare problem what do you think of your rouge? Jesus bless y’all.
Been loving the rouge did a video covering all the small things I did to make it perfect for me, and explained any and all things I had problems with.
I wish you could have showed how this folds up. The is nothing I have seen in the instruction manual about how to do this or even if it can be done. That thing takes up way too much floor space when it is not in use.
Doesn't fold up. Does take up some floor space.
Something about bare feet around a mower gives me anxiety. Haha. That is a cool jack. What did that cost you?
They are 249 but they always have cupons and sales
@@robertmalensek5736 that's not bad. Thanks for the reply.
Looking for jack for husgavana
I would think it Should work on about any brand
I would use jack stands after I raised the mower. I don't trust lift jacks. If a lift jack loses pressure and you're under the mower, goodbye Charlie. You can place the jack stands under the square bar holding the tires.
It has safety pins that keep it from coming down if it lost pressure, I always make sure they engage!
Jack stands are a valuable safety tool. If this mower fell on you underneath, it would be a difficult situation to say the least.
@@robertmalensek5736
Bingo, just don't forget to toggle the pin locks back after you let it back down.
Thank you for the video. Please wear some boots, though.
what if my lift wont go down
Did you flipped the safety pins
Put a Little bit of sand on that mower for them feet
Looking for a Jack for my Brand New SCAG Turf Tiger II. Great vid,,,thank you. Please redo this awesome video with work boots on. May be sending an unsafe message. Thanks just the same.
If sandals are an unsafe message then you better not take it outside either in case you get struck by lightning. He isn’t jump off it with the blades running or weed whacking he literally moved it forward 3ft and jacked it up.
@@micahrandolph4397 He's not T R I M M I N G either.🤡
No shoes, really? You're unsafe.
@@Gmar69 and what is unsafe about what I am doing that I would need shoes? Think I will cut my toes off?
lol, he has tough feet, I on the other hand do not :). But he kicked the tire with his heel, feet get stronger if you use them barefoot, my cousins could run bare foot on poinitng rocks.
Working around equipment with bare feet! Man, I question your video. Wasted my time!
Don't know what having shoes on has to do with the video of reviewing a jack, still tells about the jack and how it works!
@@robertmalensek5736 Goof.
Okay OSHA Pete!