How To Replace 2014-2020 Chevrolet Impala Front Bumper | Part 1 - Remove Bumper | ReveMoto
ฝัง
- เผยแพร่เมื่อ 25 ก.ค. 2024
- Where to buy: bit.ly/14-19ImpalaFrontBumper
Learn how to remove your Chevrolet Impala front bumper the right way! This bumper removal process only requires a few tools.
Source: www.revemoto.com
0:00 Start
0:21 Intro
0:41 Radiator cover removal & top bumper bolts
1:58 Fender bolt removal
2:47 Fender liner bolts/clips
4:31 Lower bumper bolt
9:18 Bumper removal
10:31 Outro
Thank you for stopping by to watch our Chevy Impala front bumper removal. The newer Impala vehicles have a very aggressive and sporty front bumper compared to the older models. There are definitely a lot more bolts and screws to remove off this bumper. But, that doesn't mean it's more difficult than the older model, it just takes a little longer. We'll show you how to remove every bolt and screw, you'll be a pro after watching this video.
TOOLS NEEDED:
You will need a 7mm wrench or socket wrench, a panel clip removal tool, or 2 flathead screwdrivers. You'll also need a torques bit T-15 for the fender liner bolts.
PROCESS:
We started by removing the radiator cover to expose the top bolts on the bumper. Very easy and straightforward. Be sure to not lose any of the install hardware, it's okay if you have a couple extra bolts but it is not recommended. Next, we moved down to the fender liner or the end of the bumper. Our bumper has damage on the driver side fog light area which caused the bumper to dip. It was pretty easy to work with. You do have to turn your wheel or completely remove it to reach the torques bit screws. We like to work less, so we turned the wheel and used the torques bit into a smaller socket. Once those are off, remove the 7mm bolt that connects the bumper to the fender bracket. Repeat this step on each side. Then we moved to the bottom bumper and splash shield. There are quite a few bolts and screws here. Be sure to remove the splash shield from the lower engine cover. You do not have to remove the lower engine cover, you just have to disconnect it from the splash shield and bumper. Now you are ready to remove your bumper, but be sure to unplug the fog lights if you have any. Ours had the cover but there is still a wire harness that connects to what I believe is the ambient sensor.
Follow Us on:
FB: / revemoto
IG: / revemoto
Twitter: revemoto?lang=en
_____________________________________
#impala #chevrolet #chevyimpala #howto #revemoto #paintedautoparts #onlinepaintedparts #chevy #diyproject #diy #automotive #howto
DISCLAIMER: While ReveMoto tries to make the information in this video as accurate as possible, we make no claims, promises, or guarantees about the accuracy, completeness, or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself (DIY) projects entail some risk. It is the sole responsibility of the viewer to assume this risk. ReveMoto is not responsible or liable for any loss, damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
Thank you for watching our video! Please let us know if you want more content on the Impala in the comments below.
Where to buy: bit.ly/14-19ImpalaFrontBumper
Source: www.revemoto.com
Finally a detailed video on removing the bumper cover 🙌🏽🙌🏽 I’ve been looking for one so I can replace the upper grille. Thank you man! 🤙🏽🤙🏽
Awesome, glad we can help! It doesn't take too long and the end result of doing it yourself is so satisfying. Let us know if you have any questions!
Thanks for posting. I took mine off over a year ago and had to watch so I could remember where all the hidden bolts and fasteners are. Its a tricky bumper cover....Like a jigsaw puzzle.
Lol yeah lots pieces, but glad it helped!
Well done. Very helpful
nice, thorough review. Thanks
Thanks for watching!
Thanks for the detailed video. Excellent
Glad it was helpful!
Thanks, just did mine today and would not have known about the fender bolts if I didnt't see this prior.
We're glad we can help! Please subscribe, it helps us a ton in making new videos. 🤘
Thanks for the video fam!!
You bet, we're glad we could be of help!
Thank you!
You're welcome!
Thank you bro i was making sure i was doing it right.
For sure, glad it help you brother! If you ever need any painted replacement parts, check out revemoto.com
Thank you for sharing!!! My husband and I can replace it ourselves 🤷🏽♀️😂😭
That is awesome. Yeah only tricky part is that bold on top of headlight near fender. Good luck and have fun. If you need any parts for your car go to www.ReveMoto.com
Subscribed cuz of this bro
Man appreciate it pimp! Let me know if you have any questions.
@ReveMoto Fa sho. Yea I have a 17 and I actually like the car alot. I just want to keep it running for as long as possible. It doesnt have any issues. I just want to take it to someplace to have them check everything and see what needs to be replaced.
Me and my dad are gonna do this i need to replace grill and do drls to replace the cover i hope we can do it without breaking or scratching anything i know this video will help alot thx so much
Yeah just do the steps show and when you get to top off headlight. Getting those bolts out a little tricky but not hard. Go to www.ReveMoto.com
It would've been so sweet if you would've shown where that one cord that ripped from the bumper actually came from
Bro where can I buy the fasteners and bolts if I’m missing any ?
I'm doing a grill replacement on my 2020 Impala do I have to remove the front bumper and is it the same process as the 2019?
Hello! Yes, its recommended removing the bumper because it snaps into the back. It would be very troublesome to replace it while the bottom bumper is attached. Yes, it should be the same for the 2020. We'll change the title but that bumper is the only new style before they discontinued the Impala. Thank you for watching!
Does a 2014 impala ltz and lt fit the same bumper?
Hello Mario. I would double check with the Impala forums. If you are referring to the old school bumper, I don't think so. The fenders, hood and headlights are different on that body style. Cheers!
THANK YOU BROTHER. LIKED COMMENTED AND SUBSCRIBED. I Have a suggestion please put the links to the tools and parts that you used if you don’t care. I’ll cash app you if needed for the help!!!
Thank you so much will have team start doing that
I can get this exact bumper cover you took off painted that same silver? How much? I need one pretty much same exact job dude so thank you so much for the video
Hi @themontaya09 please go to www.ReveMoto.com for assistance.
I need to replace the horn on my 2016 Impala. Can i get to it without removing the bumper? Thanks.
Hi Jay, there is a possibility that if you take the headlight out then you can get to the horn without removing the bumper
Thank you for the video and for replying to my question.
Where did you get the front lip ?
Hello Kenneth! You can find the link below.
bit.ly/14-19ImpalaFrontBumper
Why aren't u using an impact to drive everything out faster?
We really should be using an impact gun more. I just think our tech loves using his ratchet set. It's what he grew up using so it's familiar and we have other folks using the battery pack for our impact gun during work hours. Thanks for watching!
Do you have a video of the fender removal. I just let my friend use my impala and they was in a accident and damaged the fender , bumper , headlight . And inner fender liner
I need to replace the bottom cover of the bumper it looks leather like do you know where I can find it because I have this exact same car and color
Hi! Yes go to www.ReveMoto.com they can assist you .
@@ReveMoto very expensive I cant
Was this for a Impala LTZ or LT or Premier?
Is an Lt
I need a grille for a 14 impala, how much?
Hello Toya! I think there are a couple of options for the grille. Please follow the link below and we can get you a price on that. www.revemoto.com/pages/painted-parts-request
What is Adaptive Cruise and Active Shutter? My impala is the basic version,
what is the indicated front bumper?
The shutter is a feature on the grille that closes when you activate the cruise control to reduce drag. It's usually on the lower grille or in front of the condenser. You can check with your dealership to see if you have it. Thanks for watching!
Could I buy a regular bumper and put the adaptive cruise part back on the new one?
Do you know anyone who has built a trim cover (on lower part of bumper) GM # 22738852 that will accept a real driving/fog light , like a diode dynamics SSC3 cube or SS2? It would be wonderful to have real aux lights for this 10 th generation impala?
Hello Chris! We do not know anyone who has done that. You seem like you know what you are talking about. We recommend visiting the Impala forums. The folks there are super technical and my have the answers you need. Thank you for watching!
buy a rigid impact driver brand new, register it the same day for lifetime warranty (you only get 7 days to register it) and make your jobs go by a lot faster.
rigid will lifetime warranty the battery too.
We'll definitely check that out, thank you! We could use another, more reliable gun. Our guys often use the battery packs for other tools. Take care!
if u have a chrome plated steel bumper like in a real car ( 1973 Chevy impala ) you never have to replace it
Hmmm what happen if you get into an accident the bumper doesn’t dent?
How change front Feather feather
Is the premier the same as this? I have a 2018 model
Hello and yes, I believe they models are the same. The premier may have some interior upgrades but there is only one style bumper for the new Impala's. Some bumpers have the adaptive cruise control grille but it's still the same looking bumper. Thanks for watching!
Show us how to take out the condenser
Hello. Oof, we don't have the car anymore. Condensers can be annoying sometimes. You can normally remove them without taking off the fans and radiator. You do have to be gentle though, the metal is pretty soft. Drain the coolant, find the for bolts that connect the condenser and radiator. See if you can remove it without taking of the radiator. Sorry we could not help some more. Cheers!
@@ReveMoto thanks I’ll try and follow these steps. There’s no video on TH-cam that shows how to remove it but I’ll make the video following these steps. Thanks a bunch
Thank you!
Glad it helped! If you decide to get a replacement, don't forget to check us out bit.ly/14-19ImpalaFrontBumper