nice tutorial... (im newbie in arduino and nextion i have some project using arduino and im looking like this tutorials to run the stepper motor with length using nextion hmi)...
Finally got what you saying but I’m stuck on one place, i am using arduino uno and i have one question, which is do we have to connect rx and tx or data pins? I need help with which pins are to be connected to nextion woth arduino.
Torque? this might be a function of the TB6600 board you choose. We use these for high and low torques application and we do have to replace them when they burn out. The price point for these on amazon makes it worth having a few spares laying around for replacement.
I had issues including the code in the description so I am going to add it to the website. But it takes time. If you want a specific code from a video you can use the comment form on the website and I will Email it to you.
.txt is not an option on nextion please help did they do away with it in newer updated software al i got to choose from is type, id, objname, vscope, sta, and val
First of all, thank you for this nice work. I need access to the code of this study, but I cannot donate, I want your support on the subject. Can you share this code?
I need to generate torque which can run a conveyor belt, i am using your code but it runs it slow, i am using nema 23 can you help me to control its speed a little bit faster?
I can help but you would have to go through the Cheap Controls website. You need to submit a comment on the help page. I will get back to you as quickly as I can.
Appreciate the tutorials, I figured out how to get most of this working but I'm stuck on how to add a second TB6600 driver and stepper in the code without using Accel Library. Fairly new to Arduino. any help would be awesome.
I am not sure how to explain in a comment but I think you would create another set of variables associated to another set of pins. Thank you for watching.
It is available at the old website www.cheepcontrols.com/videodetail.html?id=15 look towards the bottom. It only has the Arduino. Are you looking for the Nextion portion?
@@CheapControls it wasn’t working, the settings inside nextion editor (for buttons), if you can share the hmi maybe or can help me , it is a part of my college project i really need help..
![[TH] JFT vs RLF - VCT Ascension Pacific - Day 2](http://i.ytimg.com/vi/PuIH7w_jO6c/mqdefault.jpg)
nice tutorial... (im newbie in arduino and nextion i have some project using arduino and im looking like this tutorials to run the stepper motor with length using nextion hmi)...
Glad it helped and thanks for watching
Finally got what you saying but I’m stuck on one place, i am using arduino uno and i have one question, which is do we have to connect rx and tx or data pins? I need help with which pins are to be connected to nextion woth arduino.
I used pins 2 and 3 on the arduino
@@CheapControls got it, working now, ty
I am glad you figured it out. Good luck on your future projects.
The only thing I’m having issue is with torque, i am not able to change speed with slider properly, any help on it?
Torque? this might be a function of the TB6600 board you choose. We use these for high and low torques application and we do have to replace them when they burn out. The price point for these on amazon makes it worth having a few spares laying around for replacement.
thank you !
You're welcome!
you have to change sta va0 and va1 from a number to a string to get h0 coding to work
Thank you for the recommendation and thanks for watching
Look in the video description to search for the code?? is that what you mean ? i cannot see the code? description is great, but where is the code ?
I had issues including the code in the description so I am going to add it to the website. But it takes time. If you want a specific code from a video you can use the comment form on the website and I will Email it to you.
.txt is not an option on nextion please help did they do away with it in newer updated software al i got to choose from is type, id, objname, vscope, sta, and val
I am glad you figured it out. Thanks for watching.
First of all, thank you for this nice work. I need access to the code of this study, but I cannot donate, I want your support on the subject. Can you share this code?
If you would like the code you will need to ask in the comment section at www.cheapcontrols.com
Can you send all codes written as comment?
I need to generate torque which can run a conveyor belt, i am using your code but it runs it slow, i am using nema 23 can you help me to control its speed a little bit faster?
I can help but you would have to go through the Cheap Controls website. You need to submit a comment on the help page. I will get back to you as quickly as I can.
@@CheapControls on a particular post or anyone?
@@CheapControls done bro
On the help page
I got it. I replied
Appreciate the tutorials, I figured out how to get most of this working but I'm stuck on how to add a second TB6600 driver and stepper in the code without using Accel Library. Fairly new to Arduino. any help would be awesome.
I am not sure how to explain in a comment but I think you would create another set of variables associated to another set of pins. Thank you for watching.
Not able to get the code, can you help?
It is available at the old website www.cheepcontrols.com/videodetail.html?id=15 look towards the bottom. It only has the Arduino. Are you looking for the Nextion portion?
@@CheapControls yes please
@@CheapControls great help if you can gove me some contact?
I have it uploaded tot he link above
@@CheapControls it wasn’t working, the settings inside nextion editor (for buttons), if you can share the hmi maybe or can help me , it is a part of my college project i really need help..
Coding please Sri ripalay to bek
If you want the code you need to request at www.cheapcontrols.com. Please include the video number when you make the request.
Coding please Sri ripalay to bek