ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- FWD HEROES
kuljettajan haastattelu: • FWD Heroes - Turbo-Eer...
First lap: chasing the V1600 race car
Second lap: 1:36
Ford Escort 1989
- Engine from 1995 Mondeo
- Turbo from Volvo S60
- 195/50R15 Nankang NS-2R tyres
Driver: turboeero
Team: fwdheroes
![Warhammer 40k: Space Marine 2 | เพื่อจักรพรรดิ ! [ตอนเดียวจบ]](http://i.ytimg.com/vi/4M0ckYMA4-U/mqdefault.jpg)
Your driving lines are good, and you do use the track pretty well, but obviously in drivers point of view, it would be more likely to have bit power oversteer than power understeer in terms of cornering. Allthough some of understeer even with FWD car seen in this clip could be prevented by left foot braking (those corners where don´t need change gear).
Thanks. Everything would be totally different if rear axle would work better and rear brakes wouldn't lock in every braking. Let's see how it works 2021. My Ahvenisto lap time 1:35,2 is much better than 1:36 at Alastaro circuit.
2x gasket or forged rods & pistons? And how much BHP? ^_^
stock CR 10,5:1, stock pistons, stock everything. best dyno pull 280whp at 0,95bar, now 0,8bar so maybe 280 hp from crank.
Tell me how? 😲 I'm upgrating my Mondeo MK1 4x4, 2.0 silvertop, and I'm scared... Anyone scares me about 250hp and 350 tq is max on stock internals, but my setup is over 300hp... Now i watched your video, and now I'm confused. I have 2 gaskets with 3mm spacer, arp screw rods, thermal coating on pistons and oil radiator (stock head), TD04HL-16t, full custom exhaust with manifold, 630cc etc. And now I don't know, what power I can (should) made. What is your opinion about that?
@@SecondLifeWorks good tune and RE85 Fuel. But yes the risk is high.
@@SecondLifeWorks 250hp is good goal