What if after doing all that , the print head doesn’t still comes out ink ?Am facing the same problem with my UV printer ,Epson L805, maybe can it be a cable problem or motherboard? In case it’s a cable , which cable do I need to check ?
So I noticed the ink is connected to bottles and you had to pull the ink through with a syringe. I also noticed there are pumps in another video but only on the waste from capping station. My home epson has an air pump and fills the open space of cartridges with air pushing the ink through the pipes to the head. How does your printer keep ink flowing to heads?
Hi Jay. I replaced both my printheads today. Colour is pulling through ink, but the white is not pulling through ink at all. I seems like it is not sealing properly, but i tried aligning the cap even replaced the cap, still nothing. Followed all your steps. Nothing. But when station is off to the side the white ink just seeps through the head onto the bed. What do you think the problem could be, is the new head faulty?
Hi. You are awesome! I have a question... when I run my cleaning, white ink sometimes overflows over and around my cap. There is a strong suction from my waste tube. What could be the problem?
What if after doing all that , the print head doesn’t still comes out ink ?Am facing the same problem with my UV printer ,Epson L805, maybe can it be a cable problem or motherboard? In case it’s a cable , which cable do I need to check ?
not a dumb question yes it can get clogged if you are not running it I suggest turning off the lamp for it if your machine allows it. in fact I have an entire video on why printheads clog mostly on the white but this applies to the varnish and cmyk as well th-cam.com/video/x3h7tMHetxQ/w-d-xo.html
We replaced the white and gloss print heads and now the printer isn't printing anything. It acts like it's printing but even the color head isn't printing. We tried printing with just the color head and still nothing. Ideas?
@@JaysToDoList It is loading ink. It was printing fine using just color before connecting the two new heads. Connected the gloss on Friday and had no issues (color) printing but the gloss wasn't printing. When we connected the new white print head today we got a warning beeping for a minute then turned the machine off and back on. then no warning beep but none of the heads will print now. The machine acts as if it's printing, but nothing comes out.
@@JaysToDoList we unhooked the cable for the white print head and still no printing from the color head. then we unhooked the gloss and well, still no printing. Do the dampeners also need to be disconnected from the white print head?
What does it mean if the Printer software keeps saying my red and black ink are low, but they are full? These colors also refuse to load at the moment. I have replaced the ink pad, the damper, lifted the ink pad with washers and it still will not suck red and black ink into the head.
@@JaysToDoList thank you for the quick response..I have a mutoh xpertjet 461 uf I just purchased a new cap top I haven't changed it in 2 years hopefully hopefully this will fix the issue.
Hello! I have a differenr A3 printer but any suggestion on an xp600 not printing ink entirely? We did follow a video of yours to soak it and flush. All the Ink channels have good ink drippings when we flushed, but when tried printing, it seems to nor work🥺 help pleasssse
Thank you for your response. No it doesn’t print anything at all. We already changed the printhead (but it started printing lines, flushed several times but did not fix the lines and then the magenta clogged). So we took it out and soaked it overnight. When we put back the new printhead back, the same thing happened. No ink is printing.
Bro you saved me from buying a printhead,but why did i need to raise the cap, i never had to do that before, does that mean something else is damaged???????? 😢
Oh Man, thank you!!!
What if after doing all that , the print head doesn’t still comes out ink ?Am facing the same problem with my UV printer ,Epson L805, maybe can it be a cable problem or motherboard? In case it’s a cable , which cable do I need to check ?
So I noticed the ink is connected to bottles and you had to pull the ink through with a syringe. I also noticed there are pumps in another video but only on the waste from capping station. My home epson has an air pump and fills the open space of cartridges with air pushing the ink through the pipes to the head. How does your printer keep ink flowing to heads?
Hi Jay. I replaced both my printheads today. Colour is pulling through ink, but the white is not pulling through ink at all. I seems like it is not sealing properly, but i tried aligning the cap even replaced the cap, still nothing. Followed all your steps. Nothing. But when station is off to the side the white ink just seeps through the head onto the bed. What do you think the problem could be, is the new head faulty?
Hi. You are awesome! I have a question... when I run my cleaning, white ink sometimes overflows over and around my cap. There is a strong suction from my waste tube. What could be the problem?
Don't clean so long try a weaker clean.
@@JaysToDoList ok i'll try that. Thanks
@@JaysToDoListplease. Help me😢. My print knew the whiter ink. No show. I tray everything 😢
Right at 6:19 where can I find that connector that connects the 2 lines together. thanks
I have them how many do you need?
What if after doing all that , the print head doesn’t still comes out ink ?Am facing the same problem with my UV printer ,Epson L805, maybe can it be a cable problem or motherboard? In case it’s a cable , which cable do I need to check ?
Did you get your problem solved? Am having the same problem with my Epson L805. Have replaced the printhead but still not printing
Can the varnish print heads get clogged? Might be a dumb question
not a dumb question yes it can get clogged if you are not running it I suggest turning off the lamp for it if your machine allows it. in fact I have an entire video on why printheads clog mostly on the white but this applies to the varnish and cmyk as well th-cam.com/video/x3h7tMHetxQ/w-d-xo.html
yes we can confirm@@JaysToDoList
We replaced the white and gloss print heads and now the printer isn't printing anything. It acts like it's printing but even the color head isn't printing. We tried printing with just the color head and still nothing. Ideas?
Is it loading ink? If so I'm worried your headboard might need replaced since it is affecting 3 heads
@@JaysToDoList It is loading ink. It was printing fine using just color before connecting the two new heads. Connected the gloss on Friday and had no issues (color) printing but the gloss wasn't printing. When we connected the new white print head today we got a warning beeping for a minute then turned the machine off and back on. then no warning beep but none of the heads will print now. The machine acts as if it's printing, but nothing comes out.
@user-pu5uh8lz7b un hook the white head does it print? If so it xould be a bad cable or head even if it is new
I unhooked the cable for the white already and still no printing from the color head. Do I need to disconnect the dampeners as well? @@JaysToDoList
@@JaysToDoList we unhooked the cable for the white print head and still no printing from the color head. then we unhooked the gloss and well, still no printing. Do the dampeners also need to be disconnected from the white print head?
What does it mean if the Printer software keeps saying my red and black ink are low, but they are full? These colors also refuse to load at the moment. I have replaced the ink pad, the damper, lifted the ink pad with washers and it still will not suck red and black ink into the head.
Disregard Jay. The line coming from the ink pad to the pump motor was pinched.
Maybe the software will support ink level and you do not have inklevel sensors or your sensor is maybe broken or stuck
So a bad cap top can cause no ink to come out the print head ?
@@1sickhemi_92hemi_movement2 absolutly
@@JaysToDoList thank you for the quick response..I have a mutoh xpertjet 461 uf I just purchased a new cap top I haven't changed it in 2 years hopefully hopefully this will fix the issue.
Hey, good brother. Every time I do a nozzle check, no ink lines show at all. What could it be ?
Does it load ink? If so we expect the head if it does not load in expect inkpump cap or hose
Hello! I have a differenr A3 printer but any suggestion on an xp600 not printing ink entirely? We did follow a video of yours to soak it and flush. All the Ink channels have good ink drippings when we flushed, but when tried printing, it seems to nor work🥺 help pleasssse
It will print nothing at all? Hiw about the nozzle check? Makes me think either there is a problem with ink supply or the head is bad
Thank you for your response.
No it doesn’t print anything at all. We already changed the printhead (but it started printing lines, flushed several times but did not fix the lines and then the magenta clogged). So we took it out and soaked it overnight. When we put back the new printhead back, the same thing happened. No ink is printing.
I have a same issue but with my varnish. I have good suction, and good print on my color but my varnish is not working at all
Mine is totally messed up and no ink is coming out. Did you figure out yours?
@@xiennamariebretana1620 no, still no luck
my uv printer is printing black as green what should i do
Send us a message here we can help get you back running facebook.com/profile.php?id=61550250208064&mibextid=ZbWKwL
Bro you saved me from buying a printhead,but why did i need to raise the cap, i never had to do that before, does that mean something else is damaged???????? 😢
Or does it mean the ink pump is going
The cap is likely going bad and you added a little more pressure to get a seal so it loads
Well this is a new cap i used and i still was not getting ink to pump so i used two washers???? Any other reason ???
Why is your mashine is so dirty?
It gets a ton of use haha lots and lots 6 years worth of use now