£500 WORTH OF PARTS FOR THE BUDGET SALVAGE MERCEDES A-CLASS BUILD BUT WILL IT DRIVE? - PART 3

แชร์
ฝัง
  • เผยแพร่เมื่อ 13 ม.ค. 2025

ความคิดเห็น • 70

  • @Soca47
    @Soca47 2 ปีที่แล้ว +11

    New Joke hear this :What did the track rod arm say to the steering rod....LEGO...

  • @Baconroll699
    @Baconroll699 2 ปีที่แล้ว +1

    You’re like Father Christmas….. always giving. What fantastic content you’re by far my favourite channel.

  • @philipcrascall5860
    @philipcrascall5860 2 ปีที่แล้ว +2

    Top bloke love watching your videos
    Please keep them coming 👍

  • @BigHumz155
    @BigHumz155 2 ปีที่แล้ว +6

    PRE-SAFE Functions Limited usually means the Collision Prevention Assist radar is disabled, you need to drive the car for a bit on the new ABS sensor and that should go. ESP/ABS is on the same module as Collision Assist, also when there is a current/pending fault code on the drivetrain it will disable PRE-SAFE then too!

  • @ItzEmmaunelworld_3
    @ItzEmmaunelworld_3 2 ปีที่แล้ว +4

    loving the quality content!!!!!!

  • @williamnock8500
    @williamnock8500 2 ปีที่แล้ว +4

    Great content Dee 👍🏼 love the channel going from strength to strength 🙏🏻 happy new year to you and the family.

  • @tmwsalvage
    @tmwsalvage 2 ปีที่แล้ว +1

    Boom 🎉. Said it would be fine 😅👌👌. New drive shaft would sort it.

  • @ItzEmmaunelworld_3
    @ItzEmmaunelworld_3 2 ปีที่แล้ว +2

    yesssssir A class is alive nice work SN!!!!

  • @spencewatts2667
    @spencewatts2667 2 ปีที่แล้ว +1

    Just subscribed. Enjoyed these videos. Look forward to see what you do going forward.

  • @motormilescars9670
    @motormilescars9670 2 ปีที่แล้ว +4

    Active Bonnet Malfunction - there are two small sensor units on each side of the front bumper, connect and align those up - the light will go away or... may need a software upgrade!

    • @AmarKhan01
      @AmarKhan01 2 ปีที่แล้ว

      Are these the sensors that connect to the front SRS pressure pipe - clear tube?
      I have e class with same issue

    • @motormilescars9670
      @motormilescars9670 2 ปีที่แล้ว +1

      @@AmarKhan01 Nope, just behind both sides of the front bumper, small plastic box with 4 screws, no pipes are connected. But we have had many Mercs that just required a software update.

  • @mrsinghsgarage
    @mrsinghsgarage 2 ปีที่แล้ว +1

    Great video bro, just found your channel and I'm loving the content already. You made light work of the suspension on that corner, good to see the car moving under its own power👌🏽

  • @andymax1697
    @andymax1697 2 ปีที่แล้ว

    Just come across the channel pure class mate

  • @dannyauto5901
    @dannyauto5901 2 ปีที่แล้ว

    Great episode Dee💪👍🤟😁

  • @ZippyPenguinTribute
    @ZippyPenguinTribute 2 ปีที่แล้ว +1

    Yes Dee easy fix this one, will fly out the door 👍

  • @jasonrichards9176
    @jasonrichards9176 2 ปีที่แล้ว +1

    This is gunna be a great Ep just got in let’s go keep going Dee🔥🔥🔥👊🏽

  • @ItsTammm
    @ItsTammm 2 ปีที่แล้ว +2

    Need more videos like this 👊🏽

  • @bimmerflex5526
    @bimmerflex5526 2 ปีที่แล้ว

    Excellent progress again Dee. I just watched your M4 build three times over! This Mercedes’ is coming along nicely. Best content as usual. You are truly keeping it moving. We salute you.

  • @annon-ski7985
    @annon-ski7985 2 ปีที่แล้ว +1

    The car is looking good overall D

  • @BrutallyHnest_
    @BrutallyHnest_ 2 ปีที่แล้ว +2

    This looks like Chingford

  • @Braddleey12
    @Braddleey12 2 ปีที่แล้ว +1

    Don't forget to replace the 2 bonnet actuators too, that might also help clear the pre safe malfunction message !

  • @stringerbell547
    @stringerbell547 2 ปีที่แล้ว +3

    Dee when you do the Range Rover I want first shout on it.
    Remember......😉

  • @Soca47
    @Soca47 2 ปีที่แล้ว

    There is a special tool for the track rod arm which would make life easy for you. It has multiple C clamps that would just swap out for diffrent sizes and it would take the torque out if you find any too tight to take off..

  • @MrZimmaframe
    @MrZimmaframe 2 ปีที่แล้ว +2

    Hey Dee thanks for making these videos, I bought my first salvage car today, hope it's not a lemon 😄😅. I am sure you will get this Merc back on the road in tip top condition.

    • @flippingcarsrepairs
      @flippingcarsrepairs 2 ปีที่แล้ว

      What did you buy Im in to minds of buying one 🤔🤔🤔

    • @MrZimmaframe
      @MrZimmaframe 2 ปีที่แล้ว

      @@flippingcarsrepairs it's hard to say because it depends on stuff like finding parts and paint. I bought a Kia Ceed 2014 1.6 diesel but some parts are hard to find. VAG cars are good cus it's easy to find parts and do diagnostics, but lot of other people also know that. You kind of have to find what you are comfortable with working on and know what cars can sell for.

  • @bumpyjohnson5181
    @bumpyjohnson5181 2 ปีที่แล้ว +1

    Dee greeting's from the sunshine.
    🏝

  • @civictyper45
    @civictyper45 2 ปีที่แล้ว

    The caliper brake line is twisted need to undo the twist in it

  • @cameronupton6179
    @cameronupton6179 2 ปีที่แล้ว

    There are detonators below the bonnet towards the rear, check they haven’t went off during the incident

  • @DavesDiscoveriesChannel
    @DavesDiscoveriesChannel 2 ปีที่แล้ว

    Pre-Safe faults will normally be radar or pedestrian sensor related

  • @june3732
    @june3732 2 ปีที่แล้ว +1

    Woooo!

  • @Soca47
    @Soca47 2 ปีที่แล้ว +1

    All jokes aside this is a good flip

  • @winning5298
    @winning5298 2 ปีที่แล้ว

    Ya ya its looking lovely. Wat no tracking need bro ?

  • @mohitl1697
    @mohitl1697 2 ปีที่แล้ว

    Check the resistance of the glow plugs to see if theyre faulty shoukd be around 0.8-1 ohm if good

    • @SALVAGENATION
      @SALVAGENATION  2 ปีที่แล้ว

      I will get them out tomorrow. Thanks

    • @mohitl1697
      @mohitl1697 2 ปีที่แล้ว

      @@SALVAGENATION can check with them in situ. Positive on top metal part negative to battery

    • @flippingcarsrepairs
      @flippingcarsrepairs 2 ปีที่แล้ว

      Can also do it by taking the relay out an connecting the multi metre to the connector that way you dont need to struggle pulling the connectors of 👍👍👍

  • @amanahmed1148
    @amanahmed1148 ปีที่แล้ว

    do you use aftermarket panels? And where do you get them from?
    Great vids bro

  • @officialpapichulo9
    @officialpapichulo9 2 ปีที่แล้ว

    Would a amg line bumper fit a a35 ? Also could you advise a good place to get Mercedes parts from

  • @kNIGHTriderryder
    @kNIGHTriderryder 2 ปีที่แล้ว

    So happy the gearbox is fine also digging the k.i.m hat ❤ how much ? Lol

  • @danielrandy5851
    @danielrandy5851 2 ปีที่แล้ว +1

    Hi mate where did you buy the front bumper from thanks 👍

  • @syahirnizal6284
    @syahirnizal6284 2 ปีที่แล้ว

    The pre safe fuction may not work bcs of your radar on bumper still not installed yet

  • @Dj-zx8kc
    @Dj-zx8kc 2 ปีที่แล้ว

    It's probably down to the radar not been plugged in on bumper will need reset after after put back together

    • @Dj-zx8kc
      @Dj-zx8kc 2 ปีที่แล้ว

      Don't forget to change Tpms sensor over

  • @haroldthedog68
    @haroldthedog68 2 ปีที่แล้ว

    is it the merc with renault engine

  • @shawnmilner1419
    @shawnmilner1419 ปีที่แล้ว

    How much did the car sell out for ?

  • @nawaz8855
    @nawaz8855 2 ปีที่แล้ว +8

    You got lucky on this one fair play if gearbox was gone youd lost out big time .Salvage cars is a risky business +too much competion and lots electronics on cars ,before the internet / co part arrived you dealt with the salvage yard directly(universal salvage/sws etc etc ) You should get hold of a copy of Autotrader in 1990 an look at the salvage section 😱 your viewers will love that 👍 ❤

    • @ukcarflippers2220
      @ukcarflippers2220 2 ปีที่แล้ว +2

      Good old days lol

    • @LondonSoundSystem
      @LondonSoundSystem 2 ปีที่แล้ว

      Would you guys say that there is still good margin in the super high end?

    • @chickenroad2025
      @chickenroad2025 2 ปีที่แล้ว

      @@LondonSoundSystem depends on what car it is and how popular it is in the market and also not spending too much on repairs

    • @ukcarflippers2220
      @ukcarflippers2220 2 ปีที่แล้ว

      You can get the odd one but mostly no parts are crazy expensive and so still are the prices at auction so many would be repairers killing it hence so many in compartment etc half repaired our repaired being sold buy private seller as in auction number on the screen ending in C are popeple selling a car that’s no good at sold as seen auction

  • @abidahmed2781
    @abidahmed2781 2 ปีที่แล้ว +1

    Can I buy this car off u bro?

  • @Алексей-е1к6р
    @Алексей-е1к6р 2 ปีที่แล้ว

    💙💛Glory To Ukraine!

  • @Dannyfu849zub
    @Dannyfu849zub 2 ปีที่แล้ว

    Man went to fill his tyre but not the fuel yaara come on

  • @BlackLung911
    @BlackLung911 2 ปีที่แล้ว

    This is the proper way to do repairs, a tin of body filler is not how you should repair bodywork. I should be no more than a a very thin skin of filler otherwise it will crack over time from the vibration of the engine. 😃😃

  • @whodat7366
    @whodat7366 2 ปีที่แล้ว

    @SALVAGE NATION hope you wiped your clart after dat "movement" #whoo #whooo #whoo #dunknodasettingz #dunknodadunkno #realmendontwearmasks #bigtingzagwarnchussme #salvagenationmassiveandcrew

  • @nonyabusiness4833
    @nonyabusiness4833 2 ปีที่แล้ว +2

    Bro I searched your whole Channel after I saw the previous vid on the merc

    • @SALVAGENATION
      @SALVAGENATION  2 ปีที่แล้ว

      Thanks man hope u saw something u like

    • @nonyabusiness4833
      @nonyabusiness4833 2 ปีที่แล้ว

      @@SALVAGENATION definitely found your copart auction video useful 👌

  • @Jimmysmith_94
    @Jimmysmith_94 2 ปีที่แล้ว

    Works man can do all these ting , but man needs a mechanic to put wheel spacers on