How To Replace The Water Pump on a 2010 Buick Enclave
ฝัง
- เผยแพร่เมื่อ 10 ม.ค. 2018
- How to replace the water pump on a 2010 Buick Enclave step by step and easy way. In this video a had to replaced my water pump because i noticed it was leaking one morning from the passenger side by the all the pulleys.
- ยานยนต์และพาหนะ
Your Enclave vids have saved me thousands man. This may sound creepy but with the amount of time I've spent listening to you while I'm digging my way into that cramped engine compartment, I think of you as my Sensei Enclave...
Great job well done . Thkx sir for broadcasting this important and simple and clear video.
Very in depth video ! Helps alot thank you
Thank you very much I did learn a lot from your video it's Gear, God bless you
Just had my water pump on my 08 replaced. Cost me about $325. The today had to have my thermostat housing gasket replaced. Cost another $223!! My car has 185,000 and has thankfully been pretty good. I changed my struts and outer tie rods my self. Have new sway bar links as well. I hope it doesn’t turn into a money pit. Thanks for the great video.
Thank you bro.
I Thanks soooooo much. easier few extras steps but way worth it water pump comes out easier and bolts are right there to access.
thanks again my friend.
Thanks for your video Daniel. I just replaced the water pump on my 2008 Enclave and pretty much followed your video steps from start to finish. Its a long job, took it slow and steady like you but got in done in about four hours. Thanks again.
Andy
VE3ORE you're welcome and good job 😎👍👍
Yes my motor mount is broken also. Did you disconnect the battery before removing the fuse box? Technical name is torque strut mount
Great video, just need to turn down the ambient sound in editing so when you talk your loud n clear.
I no this is an old post but I just changed the water pump on my 2011 and its a job I didnt want more work than I already had and its tight at times but if you go in threw the wheel well its easier for the most part and the belt you dont havr to take off but I guess thats personal preference
But your video did help ne out alot thank you
What did you find for the oil leak? I just noticed oil in the same area on my 2013 Enclave. Thanks
Question
Did you had a floor jack support in the motor when you took off the motor mount, and how how long did it take you to replace the water pump. Good video
What size ratchets did you use? Trying to change my water pump. But haven't found anything that shows what tools are needed.
What did you do with metal gasket? Or did you just use the rubber one they give you?
I did this today, I managed to remove it from the bottom. I only took the belt off. I used a 10mm 1/4 inch ratchet with a stubby small extension and took out the bolts I did this about an hour. I didnt have to touch anything up top or remove the tensioner or balancer.
What’s going price to put in a water pump
3 like
Gracias Jose , saludos
Wanna come change mine for me😩?
#1 you need to disconnect the negative battery cable and secure it so it doesnt touch the terminal. Do this before disconnecting any other electrical components. #2 if you dont know the parts name you shouldnt be making videos and giving how to videos. #3 i hope you arent disposing the antifreeze into the ground from thr trash can. I dont really care what you do... because it eill be you paying the fine if uou get caught. Its a big fine from the EPA.