Don't care what anyone says walls look much better when you turn roller sideways and go over your brush cut in at ceiling and base instead of stopping 3 to 6 inches short
I use a 4” roller to back roll my cuts as I do them. Do 4’, roll with the roller as close to the wall as I can get, then do another 4’ and repeat. It comes out way better imo I also smash right into the 2” tape on the base. I’ll roll 4-6” up from it, work my paint out, and then when my nap isn’t sopping wet I’ll work some of it down to the tape. It works like a charm
@@ellayak Because if the roller is dry then it doesnt have enough paint. That way streaks are born and the wall just looks trash. Youll need more coats than usual and more paint is being used. Do more paint more money its just not efficient.
It’s not good for doing any job at all. I did try few times and always I got stuck as the system error occurred and made me sit and think about fuck all. 😅
@@Anthony-to7cp I know bro, I paint my house since I’m 10 years old, now I’m 52. We have very huge houses and our own businesses as well in our 2 acres land, every year we are spending so much on labour to maintain our property, so what I’m trying to say is by watching this video I learned the easiest way to paint with big rollers in very short time. Thanks for your comment.
For everyone asking what kind of roller this is.. it's one not to buy. These are meant for floors. So if you still want to buy them go to the hardware store and ask them for floor rollers and say i want to paint the walls and see the dumb look you will get.
Your not supposed to push on the roller. Let the paint and roller do the work. Nice even coat. Just glide it on. Takes a little longer but the results speak for themselves. And your back will thank you.
That roller cover is burned out by the second wall, as a painter this shit is frustrating cause new guys that get hired think this is the right way of doing it. Never about speed, quality first, speed comes with experience.
I know this is 5 months old... but that roller cover is fine. I wouldn't have swung the full roller over the floor, but besides that the drops are in a good spot and everything is covered. The video is still deceiving though, as all the prep work that went into it was not as fast as this. He should probably slow down a little to avoid splatter on the crown, but again this won't wear out a roller.
The sleve will be fine ...but the napp is for outside walls ... not I side ... it will leave a stippled Finnish...not flat ... so if this is a house that anyone cares about the standard ...it's no good
Mas esse rolo de pintar num seca não??? Pintar uma parede inteira com uma molhada no rolo kkkk. Eu Pinto aqui em casa, eu sei pintar... Esse rolo deve ser mágico viu kkkk. Abraço!!
You hear that rough sound ? That the roller “dry rolling” As he rolls up and down he’s creating “holidays” where paint has been taken back off with the roller. You know why? Because paint is a glue Is an adhesive with pigment and unless you dip it back into the paint, is gonna start doing what is design for and start “sticking “ back onto whatever you pass over it Rookies
Very much so and a lot more product is needed no way that's enough paint to roll that wall with the wall being dry that roller will probably do three passes and then you have to put more paint on the roller no way you roll that wall with one roller
The wall is going to have uneven sheen. Heavy coat in the beginning and he's pushing really hard to get the same coverage at the end of the wall. This is why we get so many painters saying that the paint doesn't touch up when they have to go back and touch up half the house. Yeah, I work at a paint store and see it often.
Absolutely no paint & decorators roll walls like this & believe me I know I’ve been doing new build plots (houses) here in England 🏴 for over 22 years & the stipple/orange peel the roller would leave doing it this way would be horrendous…! Also there’s no need to have the tray so far away from the walls you’re rolling.
There’s something fishy about this. There’s gotta be some kind of flaw with that paint that makes it not worth it or else everyone would be painting the same way. And NOONE paints like that
@Laura Orefice that can be contested. The methodology is wrong though even for a base coat. These faster using wider stroke videos are pointless and giving an appearance that speed equals quality.
kkkk acabei de comentar isso aqui agora, com uma molhada pintar parede inteira??? Ou então o rolo é mágico! kkk Eu sei pintar, aqui em casa é eu que pinto! Abraço!!
I like the thinking on this. Because he's painting each wall quickly, he can move on to the next wall after putting his first coat on. This means, once he puts the first coat on each wall, the first wall will be ready to paint again. And while he definitely isn't using a lot of paint on each wall, he's still saving a MASSIVE amount of time painting, meaning he can over each wall plenty of times.
3 coats minimum. He's not applying the material properly. Ideally, you would like it to be solid in 2. But unfortunately, he's not applying enough material. Also, the material he has applied is actually decreasing. Meaning he's taking it all back off when he runs a dry roller back over the surface areas he has just covered.
I have problem when i paint my wall. All the lines at the outlets, top of the walls that I painted firstly are always showing the different color with the rest of the walls. In the video, my husband told me one is wet and one is dry but i believe when the walls are dry, they will show the lines clearly. How to avoid it? Thanks
Only thing is, is you can only do that with primer, or a flat white, I guess. The amount of splatter that would hit the ceiling and trim if you had colored walls wouldn't be worth it. If it's too dry you're doing it 2-3 times or leaving holidays everywhere. I'm guessing this isn't a finish coat.
So this is why I'm always getting jobs to fix previous paint jobs 🤣🤣
Why?
I wonder how bad that splatter is with how fast he's rolling. Also he missed a spot by the window lol
Don’t be jealous 🤡
Painters ❤
Always smart to load roller several feet away from your drop cloth.
This guy paints houses with only 2 gallons of paint
Lol those are 5 gallon buckets 😂
@@tonimccoy1115 but he only uses 2 gallons of it
Lol 😆 😂 🤣 😹
and leave you a quarter for touch ups 🤣
Lol definitely cant do this with a small roller
Thanks for showing us how to thinning the paint
It is the cutting in that takes alot of time.
I’m a professional roller man for over 3 MF decades and I’m calling C to the A to the P on this one.
Don't care what anyone says walls look much better when you turn roller sideways and go over your brush cut in at ceiling and base instead of stopping 3 to 6 inches short
Absolute fact.
Especially with darker colours otherwise will get marks
I use a 4” roller to back roll my cuts as I do them. Do 4’, roll with the roller as close to the wall as I can get, then do another 4’ and repeat. It comes out way better imo
I also smash right into the 2” tape on the base. I’ll roll 4-6” up from it, work my paint out, and then when my nap isn’t sopping wet I’ll work some of it down to the tape. It works like a charm
er hat die wand kalbasil😂😂😂😂😂😂😂😂
happy end sastinoi😂😂😂😂😂😂
Spraying fresh white ceilings with wall colour.... nice...
That roller got dry as hell halfway through that wall
it’s paint it dries
@@ellayak you obviously don’t have a clue what dry rolling is
@@rylo5262 lol what does that have to do with me saying paint dries, am i wrong or right lmk
@@ellayak Because if the roller is dry then it doesnt have enough paint. That way streaks are born and the wall just looks trash. Youll need more coats than usual and more paint is being used. Do more paint more money its just not efficient.
first coat dawg only a real painter would know that scrub
Cocaine is a hell of a drug
Then stop taking it
Where did I say I take it? You obviously also missed the reference.
Jea Matt don’t do coke
It’s not good for doing any job at all.
I did try few times and always I got stuck as the system error occurred and made me sit and think about fuck all. 😅
Lmaoooo😂
Haha definitely gonna take 2 coats with all the dry rolling..
Real painters know what the fuck they are doing wrong! The millage is going to fail on this coat. 😏
true.....
Definitely
Yuuup
What ia dry rolling
I got news..rolling that fast he is splattering the color on the ceiling
Lambs wool rollers won't splatter
@@buck777777 if you're rolling like a yonki hell it does 🤦♂️
Why ?
Amazing! Real quick and less than a minute he finished painting that wall. Very good lesson everyone can learn this
Thanks 😊
First you learn, then you teach! Stop believing everything you see !
@@Anthony-to7cp I know bro, I paint my house since I’m 10 years old, now I’m 52. We have very huge houses and our own businesses as well in our 2 acres land, every year we are spending so much on labour to maintain our property, so what I’m trying to say is by watching this video I learned the easiest way to paint with big rollers in very short time. Thanks for your comment.
My contractor gets paid by the hour he would have taken 3 days to finish that wall
For everyone asking what kind of roller this is.. it's one not to buy. These are meant for floors. So if you still want to buy them go to the hardware store and ask them for floor rollers and say i want to paint the walls and see the dumb look you will get.
The color going on is a huge improvement. Great job!
Blazing fast but I bet there are tiny drip marks on the floor.
This guys the dry rolling KING
easier clean up.
Good resource management. Spoken like an ass who's unstable. Amateur hour.
Never rush a painter.
After 3 walls, he'll have as much over spray on him as the walls
Ceiling is splattered.
Oooo I love the light fixture!
Your not supposed to push on the roller. Let the paint and roller do the work. Nice even coat. Just glide it on. Takes a little longer but the results speak for themselves. And your back will thank you.
Hola.... yo no puedo creer lo bien que cubre esa pintura.
could u guys show up the surface of the wall after finished it?
They could ….
It will look stippled and rough ...it's the wrong napp thickness
How not to paint a room
Exactly.
We should encourage him and start challenging the time he dragged his heels.
Can he beat 25 seconds? 🤔🤔
Bhaiya kha se milega ye roller with long stand same plz btana
Very nice 👌
Now add removing device covers and cutting THOSE in Floor protection, plus cut in...Flat paint is very forgiving.
Rolls on easy walls have been painted before. If drywall was new would not spread like this one pass only
That roller cover is burned out by the second wall, as a painter this shit is frustrating cause new guys that get hired think this is the right way of doing it. Never about speed, quality first, speed comes with experience.
I know this is 5 months old... but that roller cover is fine. I wouldn't have swung the full roller over the floor, but besides that the drops are in a good spot and everything is covered.
The video is still deceiving though, as all the prep work that went into it was not as fast as this. He should probably slow down a little to avoid splatter on the crown, but again this won't wear out a roller.
The sleve will be fine ...but the napp is for outside walls ... not I side ... it will leave a stippled Finnish...not flat ... so if this is a house that anyone cares about the standard ...it's no good
Omg somebody who knows what there talking about thank you 👍time to paint stuff lol have a great day
OK Craig your not a Painter
As paredes são baixas 😮
This guy is a beast with that big roller.
Cuando se quiere hacer las cosas bien,salen bien.felicitaciones muchacho!!
Mas esse rolo de pintar num seca não??? Pintar uma parede inteira com uma molhada no rolo kkkk. Eu Pinto aqui em casa, eu sei pintar...
Esse rolo deve ser mágico viu kkkk. Abraço!!
You hear that rough sound ?
That the roller “dry rolling”
As he rolls up and down he’s creating “holidays” where paint has been taken back off with the roller. You know why?
Because paint is a glue
Is an adhesive with pigment and unless you dip it back into the paint, is gonna start doing what is design for and start “sticking “ back onto whatever you pass over it
Rookies
I’m sure glad all the experts only comment on these videos instead of producing them.
They’re to busy working lol
@@remingtonfishing8578exactly! It's usually the amateurs that don't have work that make these videos.
😂😂😂😂
What do you want us to do? Create a video of us painting a wall like a normal person? That doesn’t go over well with the tik tok crowd
No need to be an expert to see something thats wrong.
Would the result be any different if he rolled it on slower?
Yes, it will slow things down. Frustrate you. Other work gets delayed. Overall it's a turn off.
Very much so and a lot more product is needed no way that's enough paint to roll that wall with the wall being dry that roller will probably do three passes and then you have to put more paint on the roller no way you roll that wall with one roller
The wall is going to have uneven sheen. Heavy coat in the beginning and he's pushing really hard to get the same coverage at the end of the wall. This is why we get so many painters saying that the paint doesn't touch up when they have to go back and touch up half the house. Yeah, I work at a paint store and see it often.
True. Doesn’t anyone read the TDS anymore?
@Jack Badabing ya. It’s gotta be the first coat. Lol. Their jumping to conclusions
It's a primer coat ya boob
Must be pro mar 200 or 400
@@mrtv777 Benjamin Moore, not Sherwin Williams
Absolutely no paint & decorators roll walls like this & believe me I know I’ve been doing new build plots (houses) here in England 🏴 for over 22 years & the stipple/orange peel the roller would leave doing it this way would be horrendous…!
Also there’s no need to have the tray so far away from the walls you’re rolling.
It's the difference between cheap production painters and real painters. No whites, they go home day 1.
Ditto, looks like a masonry roller seen that on plasterboard 😱
You're a buffoon...it's a 1/2" nap & well backrolled
@@funkychinaman7118 re-rolling a wall is not backrolling. And you're calling people buffoons.
@@mccartneystuart rolling a wall after rolling is certainly backrolling you dolt
Nice job what roller frame are you using here it 18inch.
Keep up the great work!!
Wish they would show how to cut in and paint moldings as fast
You can’t. That’s why they can’t show you that.
Sim, muito rápido.
Quem fez os recortes?
Quanto tempo pra fazer recortes sem marcas.
Quantas demãos?
Vc parece ser ótimo no que faz.
The backroll is absolutely a must...never forget it.
Rolling is the easiest part.
Yall need to calm down I'm sure these rolling videos are for pure entertainment.
Sounds like you’re the one who needs to calm down lol
Three hands for sure.
Paint with a roller that’s 2 foot wide. You can get a lot of stuff done fast.
Didn’t know a roller could hold that much paint
Hallo sir, what is the name of roller and where can we buy it?
They are Purdeys 18 inch rollers
There’s something fishy about this. There’s gotta be some kind of flaw with that paint that makes it not worth it or else everyone would be painting the same way. And NOONE paints like that
It’s his technique of converting as much ground on the first coat, and the second won’t use as much
It’s called dry rolling. This is a trade that sometimes faster isn’t better.
It’s Benjamin Moores paint. The best to buy
@@lauraorefice2488 you can paint with fine paints of Europe or any expensive paint you want, it doesn't make a difference dry rolling is dry rolling
@Laura Orefice that can be contested. The methodology is wrong though even for a base coat. These faster using wider stroke videos are pointless and giving an appearance that speed equals quality.
Are the walls smooth or texturized?
Smooth painter gangster..🕵🏻♂️
O cara nem fica sujo, top demais.
You kill my back watching you use the short pole
A tinta é muito boa ou o rolo faz render tudo isso?
kkkk acabei de comentar isso aqui agora, com uma molhada pintar parede inteira??? Ou então o rolo é mágico! kkk
Eu sei pintar, aqui em casa é eu que pinto! Abraço!!
Best texture wall😃
He must offer to refinish hardwood floors as well
I like the thinking on this. Because he's painting each wall quickly, he can move on to the next wall after putting his first coat on. This means, once he puts the first coat on each wall, the first wall will be ready to paint again. And while he definitely isn't using a lot of paint on each wall, he's still saving a MASSIVE amount of time painting, meaning he can over each wall plenty of times.
Where can I find a roller like this
Cut in twice before rolling
My paint wasn't spreading out this smoothly at all.. Is it type of paint I used? Maybe cheap?
Es una exelente pintura con poder cubriente y exelente no tinta una de las pinturas mejores del mundo .
Bravo!
Very nice
🎉🎉🎉
From this speed he will paint whole house in two hours and will rest whole day😅
I use this with painting on canvas too, gives the application uniformity, life, and body.
Need 2 coats of paint for sure
You need two coats on EVERY wall. No exceptions. This is probably 4
3 coats minimum. He's not applying the material properly. Ideally, you would like it to be solid in 2. But unfortunately, he's not applying enough material. Also, the material he has applied is actually decreasing. Meaning he's taking it all back off when he runs a dry roller back over the surface areas he has just covered.
Hi what roller sleeve is this it it a microfibre one ?
The paint station set up is already a no lol....
And throw splatter all over that uncovered floor at that speed. Those small drops will fly all over everywhere.
He's doing a great job with that 18 inche roller.
Its tough on the shoulders
And arms
If only houses had no windows, outlets, switches, thermostats,,,,
I like the old and new colors. Would you post the colors and brand names such as Sherwin Williams?
Yet another video that makes me realise I stagger through life as a true incompetent.
He can paint a wall, no joke
Show the wardrobe paint if you can!!!!!
Te felicito 👏👍me encantaría aprender esa parte
Wydaje się, że to łatwo, próbowałam malować i wałkiem i pędzlem, wszystko się mazało.
I’m sure it’s a hell of a work out with the pressure this guys using
You are really smart 🤓❤
Ole buddies rollin with a lions mane 👀
I have problem when i paint my wall. All the lines at the outlets, top of the walls that I painted firstly are always showing the different color with the rest of the walls. In the video, my husband told me one is wet and one is dry but i believe when the walls are dry, they will show the lines clearly. How to avoid it? Thanks
The paint cover roller has holes in it and filled with paint.
Nice, those wide rollers are a must!
I hate the prepping, though. 😊
Yeah a must keep away from them.😂😂😂😂😂😂
paint pand it to far away and don cover all floor. i will cover all floor for no mess and use 18" roller for walls and ceilings. to.
Lol,it might be fast but the wall will be rough. This may be ok for priming because you sand afterwards,but not for finishing coats.
Esa herramienta está muy buena para dar la primera mano de pintura
Everyone be hating it looks fine
Que buena es la pintura americana, porque la que venden acá en Chile apenas le das dos pasadas con el rodillo y ya lo tienes que volver a remojar.
Try doing that without diluteing the paint down.
Rolling master ❤
Is that a watered down coat?
Sir ya oil pent hay ya distemper
Now that everything is covered i yellow dots from the spray off the roller you can paint the ceiling and clean the floors.
He probably doesn't think about the texture of the drawing from the long pile of the roller.
Only thing is, is you can only do that with primer, or a flat white, I guess. The amount of splatter that would hit the ceiling and trim if you had colored walls wouldn't be worth it. If it's too dry you're doing it 2-3 times or leaving holidays everywhere. I'm guessing this isn't a finish coat.
That’s the easy work. The edges are the hard, time consuming work.
And the brush cut in took 3 months
Love watching someone paint with the tray no where near the wall🤦♂️
So you pass over a bare floor with a fully loaded roller? You’re fired! 😂😂😂
where can you buy it for painting?
What is the name of this tool that you are painting the wall?
Where is this product sold?
Beautiful and wonderful wor
Still can't believe this how soo quick😮