I upgraded from CX 65" to 77" G4 recently. Also first time to wallmount, the hardest part was carrying the TV upstairs where the living room was and then lifting the TV to the wall(two persons) after that everything else went smooth. Wall bracket is amazing. This TV is super bright. In games I had to calibrate it to 1000 nits in hgig mode on PC because the highlights really pop already at 1000 nits. But this TV can do 1500 nits and over 2000 nits in dynamic tone mapping. Also colors really pop as well in both movies and games.
Currently considering upgrading from an old 65" LG OLED to the 77" G4 - and I'm definitely not gonna carry that thing, fortunately the local dealer will hang it on the wall for me if I order there.
Had my 83 G4 on the wall for a few days now, love it Here in Australia LG include a ~700x150x4mm metal plate to attach the folding mount to as our stud spacing is usually wider (~450) than the ~400mm mount, means it doesn't sit quite flush with the wall but feels much safer than one stud, I understand you're a pro and probably insured but I wouldn't trust only plaster to hold my $10K TV We also get both desk/table stand and the wall mount with the G4's
Hi. A great TV. I would love to see that plate! Didn't know it existed. My insurance covers everything that could happened. After mounting thousands of TVs I have learned everything about walls also. But I do not recommend any TV on plaster alone , unless you have done that kind of mounting many times before. Lot of things can go wrong.
I’m in Australia and got the 83” G4 also, was a hell of a sale they had on! I had the same problem as you re stud location, but wanted it flush I had to cut into the wall and add some extra studs. End up putting a picture frame around the whole thing. Looks clean. What an awesome TV!
@@benny360 Just bought one from Harveys for 2k off with the 10% gift card, was well happy, but unfortunately it won 't be delivered until my new house is ready to be shipped to it in 2 weeks
I live in Finland and can only get Toggler Snaptoggle. I’m not sure whether to go with M5 or M6 since I have to order a minimum batch of 20 pieces. I don’t have the TV at home yet, but I want everything to be prepared before mounting it. The wall is a simple 10-12mm thick "gipsvägg" (drywall), though I’m not entirely sure of the exact thickness. I’m quite concerned about mounting a 77-inch, 36kg TV on such a thin wall.
I’ll be getting this exact TV. Do you think it can be mounted to the drywall? I am afraid that where I’d like to mount it precisely, I may not find studs. Great video, I must say!
@ thanks for the response. I have mounted quite a few things on drywall, some heavy and some light, so I am familiar with mounting techniques for drywalls. But never something as heavy as this 100 lb TV. Given your experience, can I expect drywall material to behave similar to plaster for mounting purposes?
The new OLEDs from LG brighten the colors and lose details. I think you would be very surprised because in my opinion it looks worse. I gave away my C3 and the LG C2 turned out to be much better
Awesome job thanks for sharing. How does the TV sit flush to the wall if there is no channel for the HDMI and power cord to sit in wouldn't the thickness of the HDMI cable prevent the TV from going flush to the wall?
@@oslotvmontering I’ve actually tried to search for these wall plugs but I’ve had no luck, do you have a name or a link? I would like to purchase in the UK. thanks
Hi. With the correct plugs, yes. Plaster can hold more than you think. If you look at the end of this video you can se how much a wall mount can hold with perfect conditions: th-cam.com/video/hOQmD2n0vbo/w-d-xo.html
@@oslotvmontering thanks :) i have plastered wall too but just not sure if can hold 77 inch TV weight. Currently i mounted 70 inch with about 28kg so far okay. If larger TV, i just unsure if it can.
Really enjoyed that. I have the 77"....wife said no to the 83" taking in our seating position i now think she was right. Look forward to more videos from you. Ive liked and subscribed 😊
Great video! Getting my 83" G4 next week and can't wait. We have acoustic wood paneling on the wall, and concrete wall underneath. Do you think there will be any issues getting the tv mounted correctly and safely since the paneling has wood and fabric backing? Contemplating if I should ask the company mounting the tv to maybe saw and cut wall paneling off right where the mount will go and add some plywood to get the mount as far out from the wall as the wood paneling goes before installing it...
Hi There, I'm looking into getting the 65' G4, however, the wall mount version is out of stock, and only the stand version is available (in the UK through LG website). Could you please recommend alternative wall mount? I know it looks super slim and smart when it's with the orginal one, however, we have our dining table on the site, and we would like to be able to rotate the TV towards it, which will be I would say 30-45 degrees rotation, which I don't think the normal mount covers anyway. Thank you and your help is much appreciated!
Hi. This one, its very slim: www.vogels.com/en/c/tvm-5445-full-motion-tv-wall-mount-black If you need a longer arm, TVM 5645 and TVM 5845 is also good. These are the one I use for similar mountings.
Nice tv...I was going to get this set but decided to get the samsung S90D(65 inch version QUANTUM DOT MODEL)instead..Both of these tvs are top of the line....I still have the LG C1 OLED WHICH IS STILL WORKING PERFECTLY...Lg oled are great tvs...
Have LG C1 OLED for 4 years and pixels ready burned where is static tv icons, helped just warranty. Warranty man told that all oled panels is burning pixels, so you should extand warranty anyway for this tvs.
Hei. Har ikke nøyaktige mål på det, men ca 40 cm. Du treffer nok aldri 2 stendere på det festet, i videoen så fester jeg det i gipsen. Har gjort det mange ganger før.
Hey Oslo, Do you think its fine to place the LG 77 on a swivel wall mount - I had the company say only to fix it it flush to the wall. Id prefer to use a Dream Mount swivel wall mount and have the flexibility. They say its best to leave it flush so your not potentially moving the OLED TV and damaging the screen. cheers
Hi. I have done that before, so no worries, but if you want it to look good on the wall you should use a thin wall mount for this mounting. This is the one I use every time for this, only 4 cm thick behind the TV: www.vogels.com/en/c/tvm-5845-full-motion-tv-wall-mount
Amazing man! Congrats such an amazing purchase enjoy it!, i will be getting it 83” soon so how do u find the tv so far yet? & how do u find the 720-1080p content?
Hi, I have the 77" G4 and sit exactly 10feet nose to screen. Im in the 🇬🇧 and use a BT (British Telecom) 4k Pro box (but only has one 4k HDR channel for football 😅 It has approximately 160 channels available plus apps. Half of them are 720p rest HD. I have increased the sharpness to 50 max available (had to, otherwise picture not sharp enough) That could be my eyes though (don't use glasses for TV viewing btw) other users might not agree with my settings but works for me. I use Filmmaker mode and tweak colour to 60 from 50. The picture for 720p and HD is superb........4k, 4k HDR is absolutely incredible. But best picture by far is Dolby vision and there's a lot of DV available from Netflix, Disney etc. This picture mode is if the scale. Motion is incredible too, best I've EVER seen and I've had TV and cinema as my hobby since I was 15 and I'm 62 now. Hope this helps 🤗
@@jeffleigh3747 oh absolutely unce! Thank u so much for these important info!! It is more than enough!😃 & may u have a big long life🙌🏼 have fun with ur beasty enjoyed it!🤍
Hi. They are 100% flush with the wall. But the TV in this video is not flushed. The costumer hade som cables challenges in the back that needed to be taken care of later.
Did you go into a wood stud or metal stud? If you are using just the drywall how come the weight doesn't just rip the drywall out of the wall? It was an excellent and truly beneficial video. You are excellent mechanic.
Hi. Thanks. No studs were used in this video. The force of the tv is downwards so as long as you use the correct plugs it will not fall down. I use the most expensive ones on the market, they are great for this kind of job.
@@oslotvmontering ok if you could use the stud, would you recommend it on the right or left side of the plate? Or maybe it’s possible to use a screw in the middle? TIA
@@yuriw777 There are no holes for screws in the middle of this bracket. As long as you hit one stud you are fine. It dosent matter where you hit the stud.
hello ,, G4 usually have problem burning if i using for ps5 and TH-cam Or fillm? just for that i don’t know what to do i scared for age tv after 5000. hour burn in but i think samsung better for burning tell me brother?☺️😍 and my english not good i like your videos
Ich würde einen 83er niemals mit NUR mit 5 Schrauben/Dübeln an einer RIGIPS-Wand befestigen. Die Kräfte bei ausgeklappter Wandhalterung sind an den oberen 3 Schraublöchern enorm und der 83'er wiegt laut Datenblatt 40 kg!? Aber in Oslo mit diesen schönen Socken darf man das sicherlich 🤓! VG
Hi. I use 4 screws on this one. The socks hides the fact that I almost got no idea of what I'm doing.😅 The plugs I'm using are german and extremely strong, you guys know your plugs, I would never do this with any other plugs. I use them every day.
@@oslotvmontering Yes, I know these dowels are very good and many colleagues use them. But I don't trust the 12mm Rigips-Wall 😂. I use 3 OLED TVs here, including a 65G3, which I hung on a solid brick wall by myself, and I still used 8 dowels/screws .
To put only 4 screws instead of 8 for a TV of this size is not only unsafe but also impolite. The manufacturer includes 8 screws to reduce risks and specifies this in the manual for the worst-case scenario - and this is exactly the worst-case scenario: an empty, single-layer drywall...
Hi. I use 4 screws because of safety. When mounting on plaster wall with no studs the distance between each plug needs to be no less than 10 centimeters. Because of the small size of the mount, I cannot use more than 4, and because of the plugs I'm using, 4 is enough. 2 of those can hold a person. 8 screws on this mount would make the plaster crack between the plugs, and that is not safe at all.
@@oslotvmontering The load-bearing capacity of screws depends on the thickness of the drywall, ranging from approximately 17-72 kg. However, if the TV is left tilted (for cable management), the incline combined with increasing weight and its static load might cause unexpected issues. I couldn't find information about a 10 cm gap (hopefully, you don't mean 2x4 cm) in the official specifications, and I don't understand how this could adversely affect the mount? My second question is: why did you choose, contrary to the instructions, to drill into the elongated mounting slot of the plate, which has a larger circular entry point for the screw, and use a washer? 🤔
@@anlemcsa132 I use the holes at the end because using those makes it easier to adjust the bracket in correctly position before fastening it to the wall. So just to avoid unnecessary mistakes, my costumers do not like unnecessary extra holes in the wall.
![Putting together my new couch gaming setup! [83" oled tv + pc & ps5]](http://i.ytimg.com/vi/Opu1pVZKPDg/mqdefault.jpg)
I upgraded from CX 65" to 77" G4 recently. Also first time to wallmount, the hardest part was carrying the TV upstairs where the living room was and then lifting the TV to the wall(two persons) after that everything else went smooth. Wall bracket is amazing. This TV is super bright. In games I had to calibrate it to 1000 nits in hgig mode on PC because the highlights really pop already at 1000 nits. But this TV can do 1500 nits and over 2000 nits in dynamic tone mapping. Also colors really pop as well in both movies and games.
Hi. Agree. Thanks fot the info.
Currently considering upgrading from an old 65" LG OLED to the 77" G4 - and I'm definitely not gonna carry that thing, fortunately the local dealer will hang it on the wall for me if I order there.
I'm in the same situation, have a CX 65" thinking of upgrading to the G4 77".
Is it noticeably better in your opinion?
I’ve had my 83inch of this model on my wall mounted for two week now, no regrets at all . Thanks for the video
Hi. A great TV, i mounted the same TV the day after this one, just as fun as this one.
Which mount did you purchase?
@@MRSTEEL15I purchased the Sanus Elite 4D tilt mount . Holds up to 150lbs no issues, Best Buy geek squad installed
Nicely done and very professional indeed. Checking in from Los Angeles, CA (USA)
Hello. Thank you. Enjoy your day in Los Angeles. 👍
That was really smartly done. You make it look easy which I know it isn’t. Well done!
Hi. Thank you.
Best wall mounting video I've seen, cracking job. I just bought this TV today, can't wait to wall mount mine also
Hi. Thanks. Enjoy your new TV. They are great!
Had my 83 G4 on the wall for a few days now, love it
Here in Australia LG include a ~700x150x4mm metal plate to attach the folding mount to as our stud spacing is usually wider (~450) than the ~400mm mount, means it doesn't sit quite flush with the wall but feels much safer than one stud, I understand you're a pro and probably insured but I wouldn't trust only plaster to hold my $10K TV
We also get both desk/table stand and the wall mount with the G4's
Hi. A great TV. I would love to see that plate! Didn't know it existed. My insurance covers everything that could happened. After mounting thousands of TVs I have learned everything about walls also. But I do not recommend any TV on plaster alone , unless you have done that kind of mounting many times before. Lot of things can go wrong.
I’m in Australia and got the 83” G4 also, was a hell of a sale they had on!
I had the same problem as you re stud location, but wanted it flush I had to cut into the wall and add some extra studs.
End up putting a picture frame around the whole thing. Looks clean.
What an awesome TV!
@@benny360 Just bought one from Harveys for 2k off with the 10% gift card, was well happy, but unfortunately it won 't be delivered until my new house is ready to be shipped to it in 2 weeks
Awesome tv !!!
Great Unboxing Video
Nice Socks 🧦!
Hi. Thanks. Life is to short to wear boring socks 😊
I live in Finland and can only get Toggler Snaptoggle. I’m not sure whether to go with M5 or M6 since I have to order a minimum batch of 20 pieces. I don’t have the TV at home yet, but I want everything to be prepared before mounting it. The wall is a simple 10-12mm thick "gipsvägg" (drywall), though I’m not entirely sure of the exact thickness. I’m quite concerned about mounting a 77-inch, 36kg TV on such a thin wall.
Hi. I would never use anything else than duotec on a job like that. They do sell it in Finland also.
During the parts of the video in which I was able to draw my eyes away from those socks, this was helpful for me to watch 😅
Thank you. Life is too short to wear boring socks! 😅
Awesome wall mounting video. What is the distance from the floor to the TV?
Hi. Thanks. This one was probably 60-70 cm from the flor. But this is different from house to house.
I’ll be getting this exact TV. Do you think it can be mounted to the drywall? I am afraid that where I’d like to mount it precisely, I may not find studs.
Great video, I must say!
Tengo la misma duda
Hi. As long as you know what you are doing, you should be fine. I hva mounted this tv on plaster many times.
@ thanks for the response. I have mounted quite a few things on drywall, some heavy and some light, so I am familiar with mounting techniques for drywalls. But never something as heavy as this 100 lb TV. Given your experience, can I expect drywall material to behave similar to plaster for mounting purposes?
@@oslotvmontering Muchas gracias por contestar. 4x Duotec n° 12?
@@SW1243-br8xy Hi. Yes.
I have the LG g2 77'' and I was so close to upgrade it for this one the G4 83'' but my G2 still looks amazing, I 'll wait for the G5 or G6
Hi. If you have the G2 you dont need a new TV in many years. 👍
@@oslotvmontering you are right except for the audio part (lack of DTS)
The new OLEDs from LG brighten the colors and lose details. I think you would be very surprised because in my opinion it looks worse. I gave away my C3 and the LG C2 turned out to be much better
I like your floor and your tv is very nice.
Do you have an Amazon link to the wall anchors you used?
www.amazon.com/fischer-539025-2-Component-mounting-plasterboard/dp/B01M1CTSCS/ref=sr_1_2?crid=LRD10V3IX4ZV&dib=eyJ2IjoiMSJ9.h5wH07TT4208hJ5cl1v5vNqJfmNCmKjdCAWpCxBVM0mprtp9wm60u5DFw-ACKQVCUybTLPPHnTLM_SOSfQOzdgtS4HmfVdsM7lvpPBMokFg.zEuG8PTtVlzzMjZx6F4MkdCTRTByrqom7v1_ZVN20SY&dib_tag=se&keywords=fischer%2Bduotec&qid=1730664394&sprefix=fischer%2Bduotec%2Caps%2C183&sr=8-2&th=1
Awesome job thanks for sharing. How does the TV sit flush to the wall if there is no channel for the HDMI and power cord to sit in wouldn't the thickness of the HDMI cable prevent the TV from going flush to the wall?
Hi. Thanks. There is a channel on the backside of the TV where you can hide the cables. If you use that one it will be flushed with the wall.
@@oslotvmontering This is also my concern. How many HDMI cables can you fit in this channel ? Also did you manage to fit the power cable ? thanks
@@01vise There are more than enough space for all cables. the power cable is at the bottom of the TV so no concern about that one either.
@oslo What size washers do you use for the wall mount?
Hi. i use what I have available. So it's actually different sizes almost every time. They should be big enough to cover the holes on the sides safely.
those wall plugs are so cool
Hi. Agree. The best of the best.
@@oslotvmontering I’ve actually tried to search for these wall plugs but I’ve had no luck, do you have a name or a link? I would like to purchase in the UK. thanks
@@supaflynina1881 Hi. The name is Fischer Duotec
Does the plaster wall can hold such big TV weight?
Hi. With the correct plugs, yes. Plaster can hold more than you think. If you look at the end of this video you can se how much a wall mount can hold with perfect conditions: th-cam.com/video/hOQmD2n0vbo/w-d-xo.html
@@oslotvmontering thanks :) i have plastered wall too but just not sure if can hold 77 inch TV weight. Currently i mounted 70 inch with about 28kg so far okay. If larger TV, i just unsure if it can.
Really enjoyed that. I have the 77"....wife said no to the 83" taking in our seating position i now think she was right. Look forward to more videos from you. Ive liked and subscribed 😊
Hi. 77 is a beauty also. welcome to the channel. 😊
It's the socks for me, lol.
Can you mount with regular brackets? not like this slim wall mount
Hi. Yes. It also comes with a 400x400 vesa
@ thank you! We ordered the 65” tho.
@@CB_4 Nice! Enjoy your mounting.
Great video! Getting my 83" G4 next week and can't wait.
We have acoustic wood paneling on the wall, and concrete wall underneath. Do you think there will be any issues getting the tv mounted correctly and safely since the paneling has wood and fabric backing? Contemplating if I should ask the company mounting the tv to maybe saw and cut wall paneling off right where the mount will go and add some plywood to get the mount as far out from the wall as the wood paneling goes before installing it...
Hi. Thanks. I have mounted many TVs on same wall like yours. Should not be any issues at all. Enjoy your TV!
Only to the sheetrock????
Hi. Yes. The plugs I'm using makes it possible.
Nicely done, Enjoy!
Hi. Thank you. 🙂
Hi There, I'm looking into getting the 65' G4, however, the wall mount version is out of stock, and only the stand version is available (in the UK through LG website). Could you please recommend alternative wall mount? I know it looks super slim and smart when it's with the orginal one, however, we have our dining table on the site, and we would like to be able to rotate the TV towards it, which will be I would say 30-45 degrees rotation, which I don't think the normal mount covers anyway.
Thank you and your help is much appreciated!
Hi. This one, its very slim: www.vogels.com/en/c/tvm-5445-full-motion-tv-wall-mount-black If you need a longer arm, TVM 5645 and TVM 5845 is also good. These are the one I use for similar mountings.
Nice tv...I was going to get this set but decided to get the samsung S90D(65 inch version QUANTUM DOT MODEL)instead..Both of these tvs are top of the line....I still have the LG C1 OLED WHICH IS STILL WORKING PERFECTLY...Lg oled are great tvs...
Hi. I agree to that. 👍
Have LG C1 OLED for 4 years and pixels ready burned where is static tv icons, helped just warranty. Warranty man told that all oled panels is burning pixels, so you should extand warranty anyway for this tvs.
What wall fixings did you use here?
Hi. Fischer Duotec.
Thumbs up just for the socks alone
Life is too short to wear boring socks. 🤩
Something tells me he does this for a living…just saying. Can I hire you? Perfection.
Hi. Thank you. As long as you pay me well I will travel all over the world to mount TVs. 😊
Har du mål på veggfestet? Kan man treffe to stendere, eller må jeg til med ekstra plate utenpå veggen?
Hei. Har ikke nøyaktige mål på det, men ca 40 cm. Du treffer nok aldri 2 stendere på det festet, i videoen så fester jeg det i gipsen. Har gjort det mange ganger før.
Hey Oslo, Do you think its fine to place the LG 77 on a swivel wall mount - I had the company say only to fix it it flush to the wall. Id prefer to use a Dream Mount swivel wall mount and have the flexibility. They say its best to leave it flush so your not potentially moving the OLED TV and damaging the screen. cheers
Hi. I have done that before, so no worries, but if you want it to look good on the wall you should use a thin wall mount for this mounting. This is the one I use every time for this, only 4 cm thick behind the TV: www.vogels.com/en/c/tvm-5845-full-motion-tv-wall-mount
Must be some strong sheet rock🤔🤔🤔
I would NEVER hang on sheet rock, must be in a stud
9:35 What kind of rawlplugs are those? Never seen that before.
Hi. Duotec
hi! What minimum depth does the wall have to be? I'm worried mine won't be enough
Hi. It's never the wall that is the problem. As long as you use the right plugs / anchors you should be fine.
Does every size comes with the wall mount already included?
Hi. In Norway, yes. Other countries some yes and some no..
Defeats the object of hanging a gallery TV only for the TV to have power cable hanging from the bottom.
Amazing man! Congrats such an amazing purchase enjoy it!, i will be getting it 83” soon so how do u find the tv so far yet? & how do u find the 720-1080p content?
Hi. A great TV in every way. 👍
Hi, I have the 77" G4 and sit exactly 10feet nose to screen.
Im in the 🇬🇧 and use a BT (British Telecom) 4k Pro box (but only has one 4k HDR channel for football 😅
It has approximately 160 channels available plus apps. Half of them are 720p rest HD.
I have increased the sharpness to 50 max available (had to, otherwise picture not sharp enough)
That could be my eyes though (don't use glasses for TV viewing btw) other users might not agree with my settings but works for me. I use Filmmaker mode and tweak colour to 60 from 50.
The picture for 720p and HD is superb........4k, 4k HDR is absolutely incredible. But best picture by far is Dolby vision and there's a lot of DV available from Netflix, Disney etc. This picture mode is if the scale. Motion is incredible too, best I've EVER seen and I've had TV and cinema as my hobby since I was 15 and I'm 62 now.
Hope this helps 🤗
@@jeffleigh3747 Thanks 🙂
@@jeffleigh3747 oh absolutely unce! Thank u so much for these important info!! It is more than enough!😃 & may u have a big long life🙌🏼 have fun with ur beasty enjoyed it!🤍
@@oslotvmontering thank u! 🙏🏼
in love with your socks
Hi. Thank you! 🤩
do they sit flush with the wall or is there a small gap?
Hi. They are 100% flush with the wall. But the TV in this video is not flushed. The costumer hade som cables challenges in the back that needed to be taken care of later.
I would love to have that and specially that size but it’s way too expensive 😢
So, the G4 doesn't have a single cable solution to connect it to an external data receiver? Do you have multiple cables coming down from the TV then?
Hi. Yes.
Did you go into a wood stud or metal stud? If you are using just the drywall how come the weight doesn't just rip the drywall out of the wall? It was an excellent and truly beneficial video. You are excellent mechanic.
Hi. Thanks. No studs were used in this video. The force of the tv is downwards so as long as you use the correct plugs it will not fall down. I use the most expensive ones on the market, they are great for this kind of job.
Why not to use one stud anyway?
@@yuriw777 Hi. Because the costumers wanted the TV in the middle of the wall, and there was no stud to be used there.
@@oslotvmontering ok if you could use the stud, would you recommend it on the right or left side of the plate?
Or maybe it’s possible to use a screw in the middle?
TIA
@@yuriw777 There are no holes for screws in the middle of this bracket. As long as you hit one stud you are fine. It dosent matter where you hit the stud.
Name of Mount you used?
Hi. I dont have the name. It came with the Tv.
@@oslotvmontering LG WB21EB $70 USD on LG website. Was unable to find it anywhere else.
Here we go
Why no narration for the video on what’s what, what you were doing, etc.?
Hi. Too much talking on TH-cam. The video speaks for it self.
hello ,, G4 usually have problem burning if i using for ps5 and TH-cam Or fillm? just for that i don’t know what to do i scared for age tv after 5000. hour burn in but i think samsung better for burning tell me brother?☺️😍 and my english not good i like your videos
Hi. Thank you. I have never experience burning on a LG or a Samsung. They are both very good TVs.
Ir blaster? Que es eso? El mando no funciona por bluethoo?
Hi. The remote work just fine. Its for changing the TV from a different room. Nobody uses it..
@ gracias
the real stars of the video are your socks
Thank you! 🥰
100lbs tv and not one stud? Man I'd be nervous lol
Hi. Not the first TV i mounted in that house, I'm a sort of professional so all good. 🙂
sorry and the stud finder thats pretty good also
The best of the best. Franklin is the name.
That is a PREMIUM PURCHASE. Doesn't get much better than that unless you go for the 98" but then you lose brightness.
98 TVs are huge, but aways fun to mount. 😎
Wtf are those wall plus! I’ve never seen them before in Australia
Hi. They are called duotec.
Ich würde einen 83er niemals mit NUR mit 5 Schrauben/Dübeln an einer RIGIPS-Wand befestigen. Die Kräfte bei ausgeklappter Wandhalterung sind an den oberen 3 Schraublöchern enorm und der 83'er wiegt laut Datenblatt 40 kg!?
Aber in Oslo mit diesen schönen Socken darf man das sicherlich 🤓! VG
Hi. I use 4 screws on this one. The socks hides the fact that I almost got no idea of what I'm doing.😅
The plugs I'm using are german and extremely strong, you guys know your plugs, I would never do this with any other plugs. I use them every day.
@@oslotvmontering Yes, I know these dowels are very good and many colleagues use them. But I don't trust the 12mm Rigips-Wall 😂. I use 3 OLED TVs here, including a 65G3, which I hung on a solid brick wall by myself, and I still used 8 dowels/screws .
Poor diosss, qué belleza de tv puuufff 🤦🤦🙆🙆 lo que debe costar puuufff 🤦🙆🤦.😂😊😊
$5000 USD at Costco
That power cord is killing me
You, me and a lot of people. 😥
Javier Rodríguez
Try that with a massive/concrete wall 😂
Hi. Next video.. 😉
To put only 4 screws instead of 8 for a TV of this size is not only unsafe but also impolite. The manufacturer includes 8 screws to reduce risks and specifies this in the manual for the worst-case scenario - and this is exactly the worst-case scenario: an empty, single-layer drywall...
Hi. I use 4 screws because of safety. When mounting on plaster wall with no studs the distance between each plug needs to be no less than 10 centimeters. Because of the small size of the mount, I cannot use more than 4, and because of the plugs I'm using, 4 is enough. 2 of those can hold a person. 8 screws on this mount would make the plaster crack between the plugs, and that is not safe at all.
@@oslotvmontering The load-bearing capacity of screws depends on the thickness of the drywall, ranging from approximately 17-72 kg. However, if the TV is left tilted (for cable management), the incline combined with increasing weight and its static load might cause unexpected issues. I couldn't find information about a 10 cm gap (hopefully, you don't mean 2x4 cm) in the official specifications, and I don't understand how this could adversely affect the mount?
My second question is: why did you choose, contrary to the instructions, to drill into the elongated mounting slot of the plate, which has a larger circular entry point for the screw, and use a washer? 🤔
@@anlemcsa132 I use the holes at the end because using those makes it easier to adjust the bracket in correctly position before fastening it to the wall. So just to avoid unnecessary mistakes, my costumers do not like unnecessary extra holes in the wall.
How much, just $20,000 loool?
Ive seen it cheaper than that. 😅
Why are american walls always made out of paper like bro what is this?😂😂 here in germany the walls are strong like a Mountain
Hi. These are Norwegian walls. 🙂 As long as Im using german plugs we are just fine. 👍
👎