Thank you. I thought I'd bought the wrong 'clip' part or would have to get somebody else to remove the pole...... But after watching your video I knew I wouldn't break anything so felt up to doing i myself, and it was all changed in 5 minutes.
Brilliant! Pure gold! Thanks for demoing all the different types of brackets and how to take them apart - mine was one of those and I before I watched your video, I just couldn't see how to get it off. You saved the day!
Thank you - this was a job that didn't look obvious until you showed me how to do it! I was worried about breaking the bracket casing but your instructions were incredibly clear so it was no problem at all. Many thanks!
George, Thank you for the clearest and most comprehensive video I have been able to find on the net for this job. I did not have the gumption to look under the bottom shower bar post until you showed me where to look. When I did, I found a small grub screw holding the cover on. All I need do now is find a good fit allen key and see if it will undo without undue effort. Thank you and regards, Trev, Coventry
I've been thinking about replacing my shower bracket but I have the last type that you show in the video that doesn't have an obvious way to open it so this video really helped. Thanks "Dr" George.
I transferred to a new condo and will be sharing a toilet with other people. I just want a nice clean toilet and we have a broken shower head holder. Arm with this knowledge I think now I can fix it. Thank you!
A big thank you George, very useful. My wife's first question when I told her that I had replaced it was; "Did you clean out the soap holder?" - and yes I did :-)
hello Mate you have done really very good job my shower rail slider bar bracket broken since last six months and could not figure out how to replace and been looking diy shop but still no help but after looking your video i remove broken part and now hoping to get one...... really really very good job and i normally do not comment on youtube and this is my first comment as i could not stop myself praise good job done by you... thank you very much and god bless you!!!!!!!!
Thank you for the great video, I have an offshore "chrome" shower head/slide bracket, and for the life of I cannot get the cap off, I am tempted to actually grind/cut the slider bracket off and simply replace it with one similar in this video. My question is: Is there no easier way of determining the diameter of the rail?
To remove a rusted screw you can drill the head off, then remove the body with a pair of pliers or pull the plastic bracket off over the screw and remove the screw again with pliers, then use a larger head screw to reattach the bracket.
For MIRAS shower brakets , there is a hole at the bottom near the wall. You have to unscrew using an ALUM key to loosen the outer casing of the bracket
To find out the correct diameter of your pole, it's easier to use a measuring tape to get the circumference and then divide that by Pi (or 3.14) to get the diameter.
Really helpful thankyou but my rail measures 30ml in diameter and I cannot find a eplacement. It has the same rail fitting as your and fits into the 3rd example you show in in your demonstration.Can you advise?
Hi, thanks for the video. I just one problem. I've just moved into my flat and need to replace the bracket on my newteam shower. However, the screws in those rail are rusted. Any ideas how I can get them out and replace to screws also? Thank you
Hi George. My shower holding bracket has stopped working. It just slides down to the bottom of the slide bar. It there a way to fix it or will I need to replace it? I push the button but nothing happens. There's a rubber plug on the front side that is hidden by the shower handle. If I take out the rubber plug, is there a screw or something that I can adjust to fix the slider button?
My shower head keeps moving . Does the shower head holder need replacing .?? When I first moved in I had a bigger shower head . When the shower hose broke The owner replace it with a smaller shower head . . It's Chrome
Hi I have a Triton T90xr it's developed a leak from the shower head when I removed shower head and hose the leak is coming from the bottom of the unit above the prd can you advise how to fix ?
Unless the heating tank I can't think where the leak is from. Switch the power off give it a good dry out then look very carefully to see if you can spot where the leak is from, if you can find out where it is from then we may be able to help a little more.
***** Thank you for your reply, I put it on upside down and I don't really want to dismantle it all again to place it the correct way up. Keep posting, your videos are very helpful, many thanks.
I have a slightly different kind of bracket and i don't know how to open. I would like to send you a picture to help me out. Can i have your email please.
Thank you. I thought I'd bought the wrong 'clip' part or would have to get somebody else to remove the pole...... But after watching your video I knew I wouldn't break anything so felt up to doing i myself, and it was all changed in 5 minutes.
This was one of the best videos I’ve seen because you showed how to remove the bracket, and the various types. Thank you!
Brilliant! Pure gold! Thanks for demoing all the different types of brackets and how to take them apart - mine was one of those and I before I watched your video, I just couldn't see how to get it off. You saved the day!
Thank you - this was a job that didn't look obvious until you showed me how to do it! I was worried about breaking the bracket casing but your instructions were incredibly clear so it was no problem at all. Many thanks!
We're glad you enjoyed our service, have a great day.
This will be the first time I've ever had to replace one myself. Your video was very clear and helpful. Nice one, thank you!
George, Thank you for the clearest and most comprehensive video I have been able to find on the net for this job. I did not have the gumption to look under the bottom shower bar post until you showed me where to look. When I did, I found a small grub screw holding the cover on. All I need do now is find a good fit allen key and see if it will undo without undue effort. Thank you and regards, Trev, Coventry
Thanks Shower Doctor- I just fitted my new shower slider all by myself with your help. You are a legend
Over a decade old video but still one of the best ones on here.
Super helpful! I especially appreciate the explanations of the different screw covers and how to remove them.
THANKYOU for this vid, been trying to work out how to remove the bottom bracket without breaking it. You're a star :)
I've been thinking about replacing my shower bracket but I have the last type that you show in the video that doesn't have an obvious way to open it so this video really helped.
Thanks "Dr" George.
Thank you for this video, you explain so clearly how to do this! Saved our shower!
Fabulous! I spent so long trying to work out how to remove my slider rail and found the easy answer here. Thank you! 😁
without this video I would have had to get some one out to make the repair for me . Thank you . perfectly explained and demonstrated.
I transferred to a new condo and will be sharing a toilet with other people. I just want a nice clean toilet and we have a broken shower head holder. Arm with this knowledge I think now I can fix it. Thank you!
Very informative, especially the rail sizes. I've just ordered a new slider from you following watching this!
I've had a broken shower for a long time. Thanks man! Xx
Thank you! I followed your instructions and it worked perfectly! Excellent instruction video. Recommended.
A big thank you George, very useful. My wife's first question when I told her that I had replaced it was; "Did you clean out the soap holder?" - and yes I did :-)
This a great d.i.y platform very informative can't stop watching and learning
TY we had no idea how to do this, quite a mystery when we looked at it. Thanks for enlightening us and now we are able to do it ourselves. BRILLIANT
Excellent video. Clear instructions. Gives you the confidence to the do the job yourself. Thank you!
Can't believe how easy that was, because of you. Thank you! :)
Many thanks for your instructions
hello Mate you have done really very good job my shower rail slider bar bracket broken since last six months and could not figure out how to replace and been looking diy shop but still no help but after looking your video i remove broken part and now hoping to get one...... really really very good job and i normally do not comment on youtube and this is my first comment as i could not stop myself praise good job done by you... thank you very much and god bless you!!!!!!!!
10/10 for this video. Thank you. My showerbracket had been 'sellotaped' for years and I have just replaced it in 10 minutes.☺
Ah fantastic! Thank you so much, love people like you, so helpful! :D
Excellent - clear instructions, well explained and succinct. I feel confident to have a go now!
Absolutely brilliant, such a simple job but I wasn't sure how to do it, great video and thank you.
Thank you! Fitted my broken bracket like a pro 😉
Excellent one...very precise and helpful, the tutorial was so easy and i was able to help myself by replacing the bracket...Thanks..
This video really helped! Thank you shower doctor!
Fabulous info - thank you! Saved me a lot of fuss and bother in trying to figure it out.
Thank you. Very informative and helpful.
Thanks. All sorted now.
Very helpful, thanks a lot!
Explained very well, thanks for this.
Thanks for this. Solved 2 problems I have with showers at the Care Home I work in.
excellent tutorial. Really helped me to fix the shower bracket!!! thanks.
Thank you .Simple and clear and informative. just what i needed as i have to change that bracket bit :)
Thank you very much! I have just changed it thanks to this video. Excellent video.
Useful. Managed to replace mine. Thank you
This video is really useful, a big THANK YOU ❤
thank you so much it helped me a lot!
Thank you mate, from down under !
Man! you are a God sent! Really helpful video. Cheers mate!
Thank you, very helpful x
Very helpful, thank you
This was so helpful! Thanks 😊
Thank you, clear explanation
Very useful thanks for the video
Very good video
worked for me. thanks doc!
Excellent tutorial!
Thank you dear sir....very helpful for me. Best wishes always!!!
Thanks. Very helpful!
Thank you for the great video, I have an offshore "chrome" shower head/slide bracket, and for the life of I cannot get the cap off, I am tempted to actually grind/cut the slider bracket off and simply replace it with one similar in this video.
My question is:
Is there no easier way of determining the diameter of the rail?
Your a legend mate, thanks
To remove a rusted screw you can drill the head off, then remove the body with a pair of pliers or pull the plastic bracket off over the screw and remove the screw again with pliers, then use a larger head screw to reattach the bracket.
Thank you ! I managed to do mine and find out where I was going wrong :)
Glad we could help!
Thank you so much. Really helped me.
Thank You!
You are amazing
Thank you
Nice one, Helped me out alot :D
Thank you sir. Great tips!
Cool. Very helpful.
Thank you
For MIRAS shower brakets , there is a hole at the bottom near the wall. You have to unscrew using an ALUM key to loosen the outer casing of the bracket
Thanks very much!
Thank you so much. I will try that.
Thanks, that worked for me!
Glad to be of help ! :-)
Thanks!
saved my day! thank a lot
I need this!!! Thanks alot
wow thank you so much for this video!
To find out the correct diameter of your pole, it's easier to use a measuring tape to get the circumference and then divide that by Pi (or 3.14) to get the diameter.
Should you use some kind of sealent on the screw going into the wall?
mmm my screw has rusted. have sprayed with wd40 but it's not budging! might give the top one a go. Thanks for great video x
Really helpful thankyou but my rail measures 30ml in diameter and I cannot find a eplacement. It has the same rail fitting as your and fits into the 3rd example you show in in your demonstration.Can you advise?
thank you, u save the day
Hi, thanks for the video. I just one problem. I've just moved into my flat and need to replace the bracket on my newteam shower. However, the screws in those rail are rusted. Any ideas how I can get them out and replace to screws also? Thank you
OK, thank you!
No Problem Ashwin
Hi George. My shower holding bracket has stopped working. It just slides down to the bottom of the slide bar. It there a way to fix it or will I need to replace it? I push the button but nothing happens. There's a rubber plug on the front side that is hidden by the shower handle. If I take out the rubber plug, is there a screw or something that I can adjust to fix the slider button?
Hi my shower bottom bracket has a small button that pushes in (or possibly pop out) not sure how to take it off. Can you please help?
cheers!
i bought a b&q shower riser with a spring how do i intall it thanks
What to do if the bracket screw is rusty? 😢
My shower head keeps moving . Does the shower head holder need replacing .?? When I first moved in I had a bigger shower head . When the shower hose broke The owner replace it with a smaller shower head . . It's Chrome
Hi I have a Triton T90xr it's developed a leak from the shower head when I removed shower head and hose the leak is coming from the bottom of the unit above the prd can you advise how to fix ?
Unless the heating tank I can't think where the leak is from.
Switch the power off give it a good dry out then look very carefully to see if you can spot where the leak is from, if you can find out where it is from then we may be able to help a little more.
Does it matter if the shower holder release button is on the top or the bottom, as long as the hose holder is the correct way up?
+MrUniman69 The button is usually on top but it is not really important.
*****
Thank you for your reply, I put it on upside down and I don't really want to dismantle it all again to place it the correct way up. Keep posting, your videos are very helpful, many thanks.
godsend
Shower Doctor TV: How to replace a shower bracket
The Shower Doctor
I have a slightly different kind of bracket and i don't know how to open. I would like to send you a picture to help me out. Can i have your email please.
Check out this Showerdoc video and see how to replace a shower bracket on most popular shower models: bit.ly/17a8wjj #fixmyshower
Shower Doctor TV: How to replace a shower bracket - watch now on TH-cam: bit.ly/1396lyY
Learn how to replace a shower bracket with this handy video guide from us! Watch it here: bit.ly/1lZ6ETO
Thank you!! Very clear and esy!