Relays test - Remote Control Lawn Mower DIY
ฝัง
- เผยแพร่เมื่อ 20 พ.ค. 2024
- In this video I talk about relays for constant load and how much they heat up. I forgot to mention that two bigger relays are declared for 200A and 500A. At the end of video I made the test of all 5 relays.
See also my other videos:
• RC Lawn Mower Build Tips
If you have any questions about the diy lawnmower or suggestions for the topic of the next video, leave a comment in the comments section or email me at: gkobetic@gmail.com
Chapters:
00:00 Intro
00:21 Relay Types
01:26 Power Relays
02:01 Relay Operation
02:36 Power Relay Short Load
03:03 Relay Tests
05:06 Outro - วิทยาศาสตร์และเทคโนโลยี
Hello Gregor, I would like to convert or put an adapter on my robot to convert it when I need it into a Rotary Cultivator Robot Crawler Agricultural Cultivator with Remote Control
Can you help me with this or can you build one and show me how I should do it?
👍
I found more usefull solid state relay, like ssr25 for my lawn mover
Hi, glad to heat that. Could you provide link to web page? Thanks
Hola Gregor !. Me Encantar tus videos !. Me gustaria si puedes ayudarme como puedo conectar actuador lineal a mi receptor FlySky FS iA10B uso controlador de Cytron MDDS30
Hello,
It's basically very easy. One channel from the RC receiver you connect to the Cytron controller and then where the electric motor is usually connected, you connect the actuator. Do you have a more specific problem? What are you worried about? I don't speak Spanish so I use google translate as well :)
The problem I have is that I use the 2 channels of the MDDS30A for the 2 MY1016Z3 motors to drive forward, backward and both sides and the linear actuator only has 2 positive and negative cables, can I connect it to the relay that you told me to turn on the lights?
It is a 12v 30w 3 Ah linear actuator. Can I use the relay to turn on the lights to make the linear actuator extend its entire distance, which is 10cm, or even stop before it extends its entire length and then retract inwards?
Is one relay enough or should I buy 2, one to extend the length of the actuator and another to change the current so that the linear actuator retracts?
Sorry if I didn't explain myself well, next time I'll try to be clearer!
I really appreciate your help, I built it to help my father in the field. I am a professional driver. I had a serious accident and my back is broken. I can no longer do international work.@@gregorkobetic
No problem, it's easy. Buy this relays from the link below and connect it to a channel where you have three position switch or joystick, so that you can move the actuator out, in and stop. drive.google.com/open?id=13Fb0eEKkRRdKi0nUl82udXW9trxm3iGB&usp=drive_fs
Thank you very much, you are my teacher in this, I still don't know how to do so many things that I would like to do with the robot apart from making it autonomous haha
Well now we're going to the countryside, a big hug from Valencia Spain@@gregorkobetic