Installing the NZXT Kraken X62 All in one Water cooler in S340 Elite case.
ฝัง
- เผยแพร่เมื่อ 15 ก.ค. 2017
- ►UPDATE! See my newer Kraken X62 install video here - • Installing the Kraken ...
I have answered the most asked questions from this video in the new one.
► NZXT KRAKEN X62
US -- amzn.to/2JuUi94
UK -- amzn.to/2jKOfAX
DE -- amzn.to/2jJ1sKK
► NZXT S340 Elite
US -- amzn.to/2MjyRFO
UK -- amzn.to/2jKcYp9
DE -- amzn.to/2A0oTTX
My Kraken X62 was without the AM4 bracket, so I ordered the bracket from NZXT 24 days ago and still haven't received it yet. Its in transit. But I couldn't wait, I wanted to see how well the cooler performed and how it looked and sounded.
So I installed it on my old I7 3770k in my new NZXT S340 Elite case that was originally meant for my Ryzen 7 1700 computer.
It is surprisingly easy to install this beast, it runs super quiet and cools very well. The CPU is running OC@4.4ghz and max temperatures is around 69C and idle is around 30.
Do you need thermal paste? No, the heatsink comes with pre applied thermal paste, so the first time you mount it you are just fine without. I just removed mine because I accidentally scratched some paste of it and wanted to be sure there was enough so I applied the Noctua NT-H1 instead.
► Twitter - / mrgarfitech
Music credits:
Intro
Ahrix - Nova
bit.ly/1eXqiOi
DISCLAIMER: Some of the description links are affiliate links. This means if you would buy from the link I get a small commission - which then goes to the support of the channel and is greatly appreciated.
► My setup:
I used a phone to film this video: amzn.to/2YGQ1Sy
Gimbal: amzn.to/2Zq0u6c
Studio lights: amzn.to/2YgO4km
Microphone: amzn.to/2yBuMHj
► Follow me on:
Twitter - / mrgarfitech - วิทยาศาสตร์และเทคโนโลยี
![เบิ้ล ปทุมราช - อ้ายกินดอง น้องลาบงัว ft. สแน็ก อัจฉรีย์ [OFFICIAL MV]](http://i.ytimg.com/vi/-OK--KaSPcI/mqdefault.jpg)
Answers to the two most common comments :)
►The lower fan is placed the wrong way!!
- Absolutely, my bad, n00bish mistake! I was so concentrated on filming it that I didn't even notice myself until I edited it. In hindsight I should have added a note about it. But yes, it should be pushing air into the radiator like the other one is.
(This is how they should be placed: th-cam.com/video/i4_H5TySxY0/w-d-xo.html )
►Doesn't it come with pre-applid thermal paste?
- Yup, it does. I just removed it because I scratched it when doing the unboxing video.
Thx for cool video with installing this cooler system.
MrGarfi why you connect it to cpu opti? I think you should connect it to cpu fan
@Mateusz Kalinowski I am not sure what you mean with cpu opti? But on newer motherboard there is sometimes a “pump fan” pin and a cpu pin, and it doesn’t really matter which you use, CAM will register is as the pump rpm no matter what pin is used.
the pump cable is supposed to go to CPU_FAN motherboard header not CPU_OPT. I think both work but they say CPU_FAN is the right one :D
MrGarfi do you have to clean a wAter cooler overtime because I saw some vids with actual pipes with a resivoir and they were cleaning out the liquid
It's hard to find someone who videos the ENTIRE process of installing some components. Well done mate this video was great.
FreeYourMind, it had some flaws, but it was my first hardware video so I am fine with that, anyway thank you :)
Thank you! The only clear video on how to install it without it being sped up. I was worried I was gonna mess this up
Great video, high quality and simple without all the banter many tend to do. Keep up the good work. This helped on installing an X62 in a H710i case
Wayy better video than NZXT's "install guid video"!
+Delivator Glad to hear, thank you!
Thanks. I like how you pause for a moment to show what the connectors are. Nice touch.
Thank you, hope it helps with the installation :)
Thanks for the video I am building something similar, when I was installing the NZXT Kraken X62 last night I sort of freaked out since I could not get it to fit under the USB area in the front there. Now thanks to your video I know what to do!
Glad it helped :) I was also kinda surprised that it wouldn't fit in a pull config in the case.
you didn't place your fans correctly? ones blowing in, one's blowing out.
Absolutely, my bad, n00bish mistake! I was so concentrated on filming it that I didn't even notice myself until I edited it. In hindsight I should have added a note about it. But yes, it should be pushing air into the radiator like the other one is. Anyway, damn, somebody noticed, well observed :)
MrGarfi I came here specifically to see that lol
Aw man, im sorry :) Well good thing you saw the comment then - Im testing a bunch of thermal paste with this cooler at the moment so might, so I might as well try and test that weird fan configuration ;)
MrGarfi That sounds good. I'm using the Kraken X62 with a i7 7700k and on idle it's a 67°c. It's my first computer build so am a little nervous ;P
+N M First computer build, nice! 67c on idle sounds a bit high, unless its like crazy overclocked. Is it stable on load?
Thanks for telling me how the wires or supposed to go help out a lot now I can read my fans and lights
Thanks I was up last night putting together a build using the same case and cooler. The fan cables I was assuming should have been connected the way you had them to the front but I was unsure, but this helped to reassure. Thanks again!
Very welcome :)
Thank you for making this. I watched the original install guide from the manufacture and I was confused and had many questions. Like one being that in the name it says water cooler so im like "do I need to put in water cooling liquid somewhere?" (I am still learning PC building stuff) but this video clears up all of my questions. Thank you!
Cool video man, one of the best ones seen to date installing the cooler and pump....
best x62 installation on a s340 video in the world ! thank you !
you did a great job with this tutorial! Now I have confidence in installing my x62!
Thanks so much! I orderd this case along with this cooler and i had a huge problem with instalation and I was about to give up and return the cooler for the smaller version but after watching this I found out how to install! Thanks so much!
You are welcome, thanks for watching :)
Thanks man! Im building a new pc this year, 2018, in spring with this and was confused how you cool a computer with this one. Helps alot thanks!
Nqse, glad it helped, thanks for watching :)
Thank you sooo much for the great video! It helped me a lot even in late 2019!
Thank for watching, glad it could help :)
Parabéns excelente explicação, tirou algumas dúvidas que eu tinha a respeito do aperto na placa mãe! Obrigado!!!
I realised that I installed the backplate wrong but it still holds the cooler tight or does it even matter
Your videos are very high quality and good I truly hope up channel expands and you get more subs, good luck :)
Thank you Sir Antler :)
I’ve used a X62 with a H700i case!. However it won’t work turn on if the 2 fan connections aren’t connected to motherboard. My other fans can connect to case sockets. Is this ok? As fans are so loud
Thanks for this video. I have the S430 Elite Matte Black and the NZXT X42 installed. Please note it only fits in the bottom slots in the front of this case. It does fit in the top possition but two out of four screwholes arnt in place.
So before you can get a push pull config you have to move the power button?
I inly have one more plug in for the fan how do I add another plug in for the fan?
There is already pre aplied thermal paste on the kraken
yeah but it's never bad to put your own thermal paste
GeometricalPro not on top of the thermal paste on there, it’s too much now
@@zilch7116 Read the pinned message by MrGarfi...
@@mushriks what it says
Finally a video more in depth with installing this cooler! Keep up the good work! Subscribing :)
+Josh Almeida cool, thanks ;-)
can I use an alternative cables for kraken x62? coz I lost mine. Please help. T_T
I’m buying a prebuilt pc with an intel cpu, I want to know if I will have to warm up the pc before taking off the cpu cooler so the cpu does come out with it so I can swap the cooler.
I have a question, are the sata cables(one plugged from cooler not PSU), the pump cable or cpu fan cable, and the four pin connector(the one that connects with the fans) all in one cable?
Saludos desde Mexico, mi Kraken 62, quedo genial.
Really nice video bro thank you very much. I also appreciate all your answers to the comments makes it really clear
Thanks! And good luck installing it (if you have one)
MrGarfi I just finished installing it!! Looking forward to booting it up. Sadly at first I installed the pump up side down instead of having it with the two water cables on the right side. I rotated it, do you think it's a problem if I did not re-apply thermal compound?
Yeah, that pre-applied thermal paste is spread rather thin, so it might make small gaps between the IHS and the copper plate when you rotate it like that - but fire it up and watch the temperatures, if its too high then you know it requires some new paste (I would probably reapply some new in any case).
Ok thanks for the quick reply dude :)) I'm running 29-30 degrees celsius on idle. I'm going to test it while gaming and see how high it goes. Small FFT of prime 26.6 gives me 80 degrees celsius average :D
Well thats of to a nice start then - thats almost cooler than the tempetures we have outside atm where I live :) Let it run for an hour or so and you will have a much more accurate reading.
I have fans at this pump began to hum like a vacuum cleaner after six months of work - what to do do do not tell???? The rotation goes up to 1700 rpm kraken X62
my fans are running at almost 2000rpm and shows 25% speed on the fans. it's super loud. have any idea why?
Hi Paper Cut2U Gaming, is it fixed yet? I would look at the usb cable connected to the pump - if its not working properly the fans will run amok and the CAM software will not read it correctly. Also, make sure that on the cable with the 4 fan connectors you use the first one with 4 pins (pwm).
Good video. Would've liked to hear you speak about how that aio performed versus the noctua that you were previously using.
Henderson Sobers, thank you for the comment. Yeah I had planned to do some benchmarks, but never did get around to it, due to the Ryzen upgrade. I have a comparison video with the wraith spire, but that's not so fair :) Once I get my next build video done, I am planning on maybe investing in a Noctua NH-D14 or D15.
Shouldn't the radiator be the opposite orientation (tubes down)???
i need help please about 4:43 min you have connected these cables from the cooler to what exactly ?? i cant find the other cables in my pc to hook them up !! thanks
At 4:43 its the USB cable that i connect to a USB 2.0 header on the motherboard.
Do the fans on the radiator spin at boot? I'm building my first PC and at boot all fans spin except the front mounted radiator ones. (exactly like yours.) I'm thinking maybe they start spinning after load but I don't want to continue without being certain.
Yes they spin at boot time, even when set to silent mode they always spin a little (around 400rpm). Is this pump running when booting (you can see its rpm in bios to see if its running)?
thanks you saved my life even after 2 years video
Oh wow, yeah I guess it's already been over 2 years since I made this :D Glad it could help, its still an awesome cooler.
MrGarfi where do you put the water?
@@the_clapp3r298 This cooler is pre-filled with water, so you don't need to worry about the water part :)
MrGarfi THANK YOU SO MUCH! HONESTLY
Do I have to re add thermal paste even if I took it off for a lil to transfer to a new case or I’m good ??
I just took off the Kraken X62 so I could remove my motherboard and then after like 5 min I re out it back on when I put everything into my new case, do I have 2 re add thermal paste again ?
So this pump connects to the CPU fan header and not the AIO pump header then what is what would you use to AIO pump header for?
@Random Alien - good question, but actually the only reason why it is using the cpu header is because in this video the motherboard is so old it doesn't have a dedicated pump header - if your motherboard has a pump header then use that.
thanks for posting .
what happens if you continue keeping one fan push and one fan pull on the same side of the radiator?
Good question, I haven't tried it, but I think it will start to circle some of the hot air that has been through the radiator already, and so the temps will rise.
Thanks for the video. I have a asus hero mobo and unsure if it supports this aio. I tried to look while watching the video but how many fan connectors does it use and will I need to purchase spiltters for them to save space? Thanks
+Matthew Sussens it only uses a single fan connector for the pump, all the radiator fans are connected to a splitter and then the splitter cable is connected to the pump.
What was the second.cable called that he plugged in to the block because mine didn't ship with it and need the name of it
Hi Rekkless EU, do you mean the cable I insert at 2:33? That's a mini USB to a internal USB 2.0 header. You can use a normal mini-usb to usb cable but you will have to use one of the external ports of your case instead then, unless you have an internal usb hub of sorts.
I tried to install my x62 but nothing happened! The fans on the radiator didn't spin and my temperature shot up, I have everything plug in?
@Games2dye4 if nothing spins up at all then my best guess would be that the wide flat cable that is connected to the pump unit isn't connected properly, I would disconnect it and insert it again. If that still doesn't work then try the NZXT support, the cable may be defect.
But did you remove the remaining paste from the nactua cooler? since i cant see it in the video when you put on the new thermalpast?
Yeah - removed everything, cleaned both cpu and cooler with the isopropyl alcohol.
Out of curiosity what kind of maintenance does this require if any once installed? I was wondering if I should use air cooling or this for my gaming PC I am building?
It actually doesn't require any maintenance - but removal of dust may be required once in a while, just like air coolers.
I have question. I am gonna build my first pc tomorrow so i hope you can see this did you skip the part where you mounted radiator? How the radiator stays like that because you didn't screwed anything on radiator. I'm sorry if it sound dumb but I'm confused
Hi Dulcelle E, uh exciting, very first build! Ok, so check this part out in this video, it gives a clearly picture of it:
th-cam.com/video/i4_H5TySxY0/w-d-xo.html
I lay the case down, put the screws through the fans and then hold the radiator up against the fans with one hand and tighten the screws a little bit with my other hand so the radiator doesn't move and then I can tighten them with the screwdriver afterwards. Hope that helps! Happy building!
is this closed cooler
I noticed you can’t do a push-pull config like this. Is your case still pressure-positive with the radiator in the way? I’m worried the radiator block will reducing inflow.
(Is your config accumulating dust for eg.?)
Hi Teresa Le, do note that the fans are placed wrong in the video, they should both be pushing air into the case. So id both 140mm fans are pushing air into the case and you don’t crank the two 120mm exhaust fans up too much then you should be good.
Dust was not an issue for me in the 6 month I had the case (sold it).
Should i use my own thermal paste or is the pre-applied paste good enough?
Pre-applied is good enough.
Thank you for the video! really appreciate it. The best tutorial so far and mines working well and good :)
Cool, glad that it helped - did you get the X63?
@@MrGarfi haha nope, gotten the X62 instead since there's discount :)
Do you put water in the cooler? i saw a lot of videos about NZXT but never sen someone put water in it. even though it say liquid cooler
@yasser YA Hi there, no, it is a closed system, meaning that it is already filled with water and it doesn't need a reservoir like the open water cooling loops do. It is a "all-in-one" package.
I'm kind of new to liquid cooling I'm considering on get one for the first time. Does an all in one liquid cooling come with liquid already inside it by my understand or do we have to put something in it before hooking it all up? Again first time.
With a AIO like this one everything is included, so you don’t have to worry about the water.
This is way better than the video that is on the NZXT website!
Thanks :) Though there is some mistakes in it - i've fix them in other videos - one of the fans is actually facing the wrong way 🥴
@@MrGarfi I did notice that and I was aware of the written correction. I still think it is easier to understand. It confirmed with me my install was/is correct.
Ok cool, glad it could help - enjoy the nice AIO :)
What is the usb for? I’m concerned because i don’t have rgb headers on my motherboard
Hi C.M. the usb is for controlling the lights on the Kraken X62 and the fans. Without it connected the LED's will not light up and the fans will run 100% speed. So you don't need an rgb header on your motherboard for this AIO - actually in this video I am installing it on a motherboard from 2011 way before RGB headers was a thing :) But you will need a USB 2.0 header.
friend a question why 1 fan enters air and the other to extract
Hi there, yeah sorry that is mistake, both should be intakes :)
If I already have fans in front of my case can I just use those?
In theory yes, you would then connect that to the AIO's fancontroller - however they may not be the best ones for static pressure, but you could try it and compare it to the ones that comes with the AIO.
I can't figure out where u installed the 3 pin wire that comes from the pump? Everything is a 4 pin on top of my MB. It kind of looks like u skipped a pin to get the 3 pin grounded?
Yeah the motherboard usually has 4 pins connectors, but also has a little notch that kind of dictates how the fan connector can be mounted - the 3 pin connector on the pump also has notches that then matches with the one on the motherboard, so you can't really install the wrong way unless you really force it and bend something. 3 vs 4 pins is a matter of PWM support, but you can always fit a 3 pin on a 4 pin connection on the motherboard, then the PWM just isn't active.
How have you got the rear and top fans set up? I changed mine and I think they're orientated incorrectly. Exhaust for both?
Hi Deithwen, yeah so the AIO is pushing air in and the other fans in the case is set to exhaust.
I just installed my Kraken x62 lights are turning on I hear sometimes the pump sound but my cpu temp is 90 can anyone help me out
ever fix it? bc same
how do I need to turn the fans on the radiator? I dont get it one is in other one is out
+Varkbone yeah i place the fans wrong, both should be pushing air in.
Why did you apply thermal paste? Correct me if I'm wrong but I thought it came with it pre applied
Yes correct, it comes pre applied with thermal paste - but I made a little scratch in it when trying the AMD bracket on it, so I decided to remove it completely just to be sure that the paste would cover the IHS correctly.
Great video, you showed everything very clearly. all I need is the money for a gaming pc for this video to be helpful. lol.
lol, yeah it aint cheap :D
what are those metallic blue things on the mobo? Did it come like that?
It is heatsinks, and yes it came like that :) Its a old mobo.
Can the water tube touch the gpu pcb as i don’t have a backplate
Yes it can, but it shouldn't be pressing down on the card - of course if its touching a very varm area it might be bad. But the cables can be bend and directed so that it doesn't touch it and on mine its 2 mm apart from the card: imgur.com/a/JV9xG
got mine after 3 days pump died. needed to replace. such a quality component....
I would be appropriated if you can tell me if the reviews about the pump that says it die quickly true or not?
And how is it work with you so far ?
And if they might fix the issues with new krakens rev2 ? Thank you 🙏🏼
Hi munther_17, I can only speak for my own kraken X62 unit, and it still works flawlessly. But they also supply 6 or 7 years of warranty on the unit, so I am pretty confident that it will last a good while.
Fans are wrong way around and you didn't remove the stock thermal paste or did you? Confusing lol
What cable did you attach to the 4 fan connectors
Hi Speedlapse, it is a Sata power cable from the PSU that I connected to that cable with the 4 fan connectors.
So do you need anything besides the nzxt kraken to cool your cpu or is that it?
Hi Krissu Plays, the Kraken is all you need to cool the cpu yes :)
What happens if i use intel bracket on amd cpu
It will not fit the holes on the motherboard.
I heard there is leak while you use it and it suddenly die after a while if using its true ?
Nope, mine still works :) All products can fail for some reason or another - but I doubt NZXT would sell a product like this and give it 6 years warranty if it had a high risk of failing.
Im very confused on where you install the kraken X62 in the case. Do you install it on the front of the case or the top?
In the front, it doesn't fit on the top in the S340 elite :)
Just to check how is your Kraken X62? is it working fine without any issue over these few months? I am about to get one for my new gaming PC and I read the comments from Amazon and a lots was saying it spoil easily. Thanks
Hi Chun Tan, yes it is still working fine. I had some minor issue with the CAM software locking up the LED when using the music mode, but I never use that and it that went away when I build my new PC. The unit itself is still very silent and still cools very well.
What motherboard are you using, looks like you have good room between water block and ram - which has been a problem for people with this cooler
Hi Dantai, its a old Asus P8Z77-V, but in my other video its a MSI X370 Gaming Pro Carbon and it fits fine there also - if its the tubing that gets in the way you can always turn the pump in another angle instead, although the logo wouldn't be horizontal then.
Thank you for this video
+Popcorn Sutton thank you for watching ;-)
all of your fans are set to exhaust??? i ordered the same case and cooler and dont know what the best way set the in intakes and exhausts.
Hi michael c, the fans on the kraken is set to intake, pulling fresh air in (there is a flaw in the video with one of the fans). The other case fans in the top and back should be set to exhaust. They are already set like that from the start so you don’t have to do anything with those.
thanks really helped alot
if I use other fan on kraken x62 do they need to be connected to kraken x62? or can I just use fan controller box without problems? thanks
Hi ThreechTHEdruid, no they don't have to be connected to the X62 controller, you can use a different fan controller. The fan controller provided with the X62 is pretty decent though and it takes up to 4 fans.
ok thanks yeah I switch em to rbg ones^^
So I get how to install this AIO but I am still very confused on where you connect the fans. Can you help me on the please? Great channel and video btw!👍👌
+TheGamerBoy0727 The cable connected to the pump that I push through to the back at 3:22 has a sata power connector and 4 cable connectors - its this cable that the fans are connected to. And thank you for the nice comment!
MrGarfi Where do the 4 cable connectors come from? And you're welcome
At 4:22 in the video you can see the cable with the 4 connectors, its connected to the pump head and, it looks like this: imagescdn.tweaktown.com/content/8/1/8109_18_nzxt-kraken-x62-liquid-cpu-cooler-review.jpg
MrGarfi so i connect the port from the pump to a sata cable and then connect the other end of that sata cable to a sata port on the motherboard?
i thought the x62 was precoated with thermal compound?
+911eVoX yeah it is, you don’t need thermal paste the first time you mount it.
So why did you apply thermal paste? it was the first time you were mounting it.
►Doesn't it come with pre-applid thermal paste?
- Yup, it does. I just removed it because I scratched it when doing the unboxing video.
so the water block doesn't need any RGB connection? we got 3 way splitter for 3 fans? it means that if i buy AER RGb i can connect 3 fans there and i don't need HUE+. Correct?
Hi TheInvoker78, the water block don't need any RGB connection that is correct, but the fans still need the Hue+ to show the RGB colors, they cannot be connected to a default RGB connector on forexample the motherboard.
Ok thanks
what is good thermal paste for nzxt x62 dude?
arctic x, its cheap and it keeps everything damn cool !
the nzxt x52 have the same wires/cables?
Hi Robert, yeah the X52 just has a smaller radiator with 2 x 120mm fans instead of 2 x 140mm, but otherwise its the same.
Can I ask how many fan headers this utilises. is it just the one and then everything else is actually run from the pump.
Hi Ricky, yeah just one (for the pump), the radiator fans are powered through the cable connected to the x62.
MrGarfi wow didn't expect a reply so quickly thanks a lot.
Did you connect to AIO pump or CPU fan?
Do you mean the fans? They are connected to the pump.
I`ve got a question...which way should I install the fans. Your way or the other way around? Which ist the best position ot the fans to have the best cooling effect?
Hi N Hansen, with a front mounted radiator like that the fans should be pulling air in, through the radiator. Watch my never kraken x62 install video if in doubt how that looks.
Thank you for the fast response! That makes sense and the video helped me a lot, thank you!
Your welcome, and thanks for watching ;)
First build for me and I'm using this CPU cooler but can someone tell me what connectors he's using at 4:30? I'm having trouble connecting one of the wires from my cooler
Hi Connor B, the cables that I connect at 4:30 is the ones coming from the two fans - I connect them to the fan cable coming from the the pump.
@@MrGarfi Awesome thanks!
where do i put coolant?
You don't need it for this system - its already filled with it :)
Would the same steps apply to the kraken x63 im new to building PC’s so idk😅
Kevin_Mcmuffin, yes most likely - from the images i've seen there isn't much difference.
Gear Seekers did a good installation video on it here:
th-cam.com/video/_GQW9omloPw/w-d-xo.html
MrGarfi ty
I have a diff case, im using the fans on radiator as intakes as well, my question is do the fans HAVE to be infront the radiator like how yours do or can i have em behind it?
Hi Bader Alkandari, yeah sure you can have them behind - then the fans are just pulling air through instead of pushing - the result will be the same more or less.
@MrGarfi Thanks for the lightning speed reply, here's a like and a sub. Wish you the best. ❤
Thanks :)
This is just what I needed for my build even though I'm doing an amd build but the backplate still sorta goes on the same way. But how did you get the backplate to stay in place until you put the screws into it was it already prepared for that or did it come with the stuff to put on the backplate to keep it in place until you put the screws into it? And I totally agree way better than the NZXT build video
Is it a Ryzen because then you just use the backplate that comes with the motherboard and hold it in place while screwing on the screws that came with the kraken. I have another install video of that. I believe I just placed the AM4 motherboard on a mat and then installed the screws, before installing it in the case.
no I'm using a amd fx 9590 and a crosshair v formula-z
omg, the kraken controls the fans pwms ?! ?! what a beast
Hi, Garfi, at 4:10 , I believe this is a SATA connector that you're connecting to the PSU, is that right? Thank you for the informative video!
Hi Emil Alandjisky, yes correct it is a SATA connector :)
@@MrGarfi Thank you, I have another question. Is it right to connect the fans to the power fan connectors or to the mobo instead?
Hi I just bought a x62 installed it yesterday and I love it. It's my first time using water cooling but I have a question... Once the radiator starts to build dust over time, how do you clean it? Do you have a video or a reference to properly clean the radiator?
Hi TheGodeejay, I use a can of compressed air to remove the dust, that usually does the trick.
Like in this video: th-cam.com/video/DyLc_Wbg8lM/w-d-xo.html
You can also remove the worst dust with a vacuum cleaner, but be really careful with it because the small fins on the radiator bends very easily. Enjoy your new Kraken X62 :D
Can you connect your two exhaust fans to the fan splitter that connects to the pump and have all 4 fans connected to the pump and just use one fan header on the mobo?
Hi Shawn, yeah you could do that, but often you will want to control case and cpu fans separately, the case fans don't have to run with as high rpm or the case will get high negative pressure.
If you connect them all to the aio they will all run at the same speed.
@@MrGarfi I'm not building right now. Was why I'm asking. Thanks for the input.
@@shawnramey8558 yw, happy building when you get the parts :D
Thank you. Waiting on my case.
Why there are so many bad reviews on X62?
U have 1 front fan on intake and the other on exhaust, is there a reason
Yeah it's a mistake - both should be intake.
@@MrGarfi ohh okay
hi , why my kraken x62 is so loud ? i can't use the mod silence or performance my Rpm don't move i stuck at 2000 rpm :( nice vid btw
Can you change the lights? Or is it only white? If that is the case, then it is most likely the USB cable that is either defect, not connected correctly or the USB 2.0 header on your motherboard might be defect.