Also kann man den KLDE mit k8 Steuergerät und je50 Luftmassenmesser fahren? Und hat damit mehr Leistung als Kl07 Steuergerät und kl02 Luftmassenmesser?
@@christrash4124 Ok, but if you have a stock klde with no mods a difference might be small. When I have stock klde on kl05 i have 164KM 190NM, on k8 i have 171KM 206NM.
@@marcinwozniak1291 ich habe an meinem MX3 folgende Mods: Auspuffanlage 63mm mit 200 Zellen Kat und Fächerkrümmer, eine 5 kg Schwungscheibe und die Ansaugung ist verändert.
Hi, nice car it really pulls. I would like to do this swap myself on my mx3. Have you got any advice? Any difficulties? Can't find much informations about this in my country.
Bombaaaaa v6 power ;D
Super strong KLDE, it's awesome. Are you running the stock KL01 cams?
@@barcrafthandlebars3755 Yes, i was running kl01 cams
hello, have you BALANCED THE FLYWHEEL WITH THE CRANKSHAFT?
Perfect sound! Must be good muffler/resonator combo. What brand is your rear silencer and what resonator?
What are the engine mods done to get to close to the 200bhp mark?
Here is the thread about this car, u can use translator and translate to english: www.mazdaspeed.pl/forum/viewtopic.php?f=321&t=201052/
Also edited description if you dont know how to translate.
@@marcinwozniak1291 thank you
What type of headers? Stock old ones or some new stainless 6-2-1 style?
6-2-1
@@marcinwozniak1291 custom welded or those ebay ones?
@@michalbures859 ebay ones
Also kann man den KLDE mit k8 Steuergerät und je50 Luftmassenmesser fahren? Und hat damit mehr Leistung als Kl07 Steuergerät und kl02 Luftmassenmesser?
Yep, ecu k8 is the best for KLDE or KLZE. VAf je50 or kl02 is also good.
@@marcinwozniak1291 da muss ich das doch glatt mal ausprobieren. Ich habe noch ein k8 Steuergerät rum liegen.
@@christrash4124 Ok, but if you have a stock klde with no mods a difference might be small. When I have stock klde on kl05 i have 164KM 190NM, on k8 i have 171KM 206NM.
@@marcinwozniak1291 ich habe an meinem MX3 folgende Mods: Auspuffanlage 63mm mit 200 Zellen Kat und Fächerkrümmer, eine 5 kg Schwungscheibe und die Ansaugung ist verändert.
Hey! I have one of those. ;) Except mine's the ZE.
Is there a turbo-kit?
What gauges are those?
From what I’ve found, Ford probe glow gauges
Hi, nice car it really pulls.
I would like to do this swap myself on my mx3. Have you got any advice? Any difficulties? Can't find much informations about this in my country.
Yes, leave stock ecu from k8 and vaf. These are the best for 2.5 in terms of power and torque.
@@marcinwozniak1291 alright thank you, shall i keep the distributor from the k8 or KL-DE ?
@@elite33600 yes you can keep k8.
Goooddd....your setup for 196hp???
3' cai , 2.5 exhaust, 65MM TB, Klze straight Manifold, ecu k8
@@marcinwozniak1291 ouaaaaa ecu k8???i think ecu klde is better?good.....your car is very fast!!!!
@@christianxiong3835 No. Ecu klde is the worst ecu for klde. The best ecu for all k Series, klze, klde, k8 is k8. I confirmed this many times at dyno.
@@marcinwozniak1291 thank you brow....so you use Vaf from k8 or kl?
@@christianxiong3835 from k8 je50 but from KL kl02 is also good.
This is stock ?
Nope