Good too see people spending time and their nitro cars. That actually has a lovely sound and props to you for fitting a remote starter motor, good job mate.
@@RyanH87hey I was wondering do you have a kit of what you made of making it louder I was thinking behind the big black versions 6.5 hp in this sounds badass
The header primary length is tuned with the expansion pipe dimensions. This would perform a lot better if it was juat a stinger pipe extention to the rear.
I wanna put the exaust beck do my bodyshell on rc car, so, dosent matter the size of the pipe after the exaust? I have one kyosho drx with brand new body form my collection, i dont use the car to not mass with the paint etc..
Dude soo badass I was just looking to see if anyone has done a gas powered rc and real exhaust and I found a few of you out there, some have the real sounds too, epic.
Looks nice sounds great. I have an HSP .vk.18 also. Love the way you rear mounted the pipe. I really like the electric start or the remote start. Nice from one Nitro enthusiast to another .💯🙏🤝🫡
@@Tboninatorwhat I meant was that it would look like a 2 stroke dirtbike pipe, starts near the exhaust port, gets real Big, and then has a small silencer at the end. The bigger rc car engine have em. But one day I really want to put a dirtbike engine into one.
@@NOTTApro142that’s how most are built puts the powerband up really high like a dirt bike. 20-30 thousand rpm’s isn’t uncommon. This pipe should kill top end power unfortunately.
Long pipe like that will probably limit the powerband to the low end of the rpm range. The pipe length is tuned to a specific length so the resulting exhaust pressure pulses resonate at a specific rpm range to optimize scavenging in 2-stroke engines. This will make the engine more efficient and more powerful. Huge gains can be has from properly tuned exhaust.
Nice job on the pipe. Sounds good and nice car ! Team Associated ? The blue aluminum makes it look like one anyways...but I know theres tons of rc Company's
Good thing he redid that exhaust, oil will build up in the pipe and choke out the motor, nitro engines spit alot of oil out the exhaust it needs to be able to drain
The expansion chamber isn't doing anything back there, it would make waaaaaaay better power with the expansion chamber back where it was and the extension behind it. Then you could make a little resonator that would actually change the sound if that's your goal. Running it this way is gonna make it hard to find a good tune.
Had that fitment originally but wasn't ideal for firment and surprisingly it runs almost as good as it did with just the tuned pipe on the motor. Its just a pavement basher
Looks awesome from a craftsmanship standpoint, and overall aesthetics. Well done. However from a standpoint of having a good running engine it looks super restrictive, I would think you’re probably losing a lot of power… is there a reason you can’t use a shorter one?
It actually ran pretty good in that configuration, but I did re do the exhaust and the second version is how it should be and it does run a bit better now. I put another quick short up
Oh 100% but it's just a old VX18 so not too fussed. Wouldn't do this to my savage haha. Performance wise it needs a light tune up but still has a decent power band
It's got an electric remote starter and that sits above the exhaust manifold so I can't flip it with that on. Otherwise yea that would have probably worked to shorten the exhaust 👌
You have to understand what the expansion chamber does for a 2 stroke engine. There is a maximum distance that the first chamber cone has to be from the exhaust port… in other words you completely ruined your power band and even changed your full throttle fuel ratio. This looks sick and the work is nice but you actually took away a lot of power from that engine. Not hating but thought you should know.
![[Full] 4 ต่อ 4 Celebrity EP.910 | 22 ก.ย. 67 | one31](http://i.ytimg.com/vi/4TR3MVpOiw8/mqdefault.jpg)
Good too see people spending time and their nitro cars. That actually has a lovely sound and props to you for fitting a remote starter motor, good job mate.
Cheers man! Cant help myself haha always tinkering with them
make it spit flames
@@RyanH87hey I was wondering do you have a kit of what you made of making it louder I was thinking behind the big black versions 6.5 hp in this sounds badass
The header primary length is tuned with the expansion pipe dimensions. This would perform a lot better if it was juat a stinger pipe extention to the rear.
I wanna put the exaust beck do my bodyshell on rc car, so, dosent matter the size of the pipe after the exaust? I have one kyosho drx with brand new body form my collection, i dont use the car to not mass with the paint etc..
Hell yes!!!
Sounds cammed af on start up
Damn.. love the sound when it started up..❤
That’s stunning!!! Adds some realism to the model with the shell on… the Big 6 has a rear exit that goes through the shell and I’ve always like that….
Dude soo badass I was just looking to see if anyone has done a gas powered rc and real exhaust and I found a few of you out there, some have the real sounds too, epic.
Nice work man, Hard work always pays off
Aye, nice work!! It's very well done, and it sounds great ✌️
Looks nice sounds great. I have an HSP .vk.18 also. Love the way you rear mounted the pipe. I really like the electric start or the remote start. Nice from one Nitro enthusiast to another .💯🙏🤝🫡
Cheers my dude! Its not the fastest nitro but its a fun reliable toy for sure!
@@RyanH87 it will drift and do donuts all day💯🔥🫡
That's awesome! We need tutorials how made this beauty
This is the def of start and go
Hell yeah, sounds beautiful 😍
Sounds and looks great but that remote start I must have for my Hpi rs4 3 🔥
The remote starter is totally unnecessary haha but its so awesome. Realy good if it stalls out in the distance.
that's sick 😂😂
It would be cool if somebody made an expansion pipe for one of those tiny nitros. It would sound wicked
Like a 2 banger one aye haha yea that would be sick.
Thats what is on the end...and normally what they run. Two strokes dont run well without an expansion chamber.
@@Tboninatorwhat I meant was that it would look like a 2 stroke dirtbike pipe, starts near the exhaust port, gets real
Big, and then has a small silencer at the end. The bigger rc car engine have em. But one day I really want to put a dirtbike engine into one.
@@NOTTApro142that’s how most are built puts the powerband up really high like a dirt bike. 20-30 thousand rpm’s isn’t uncommon. This pipe should kill top end power unfortunately.
@@devindunn2575 yeah.
The fact that it actually works is so cool
Hell yeah sounds good
Cool man.
Sick how
Startup sounds so badass
Long pipe like that will probably limit the powerband to the low end of the rpm range. The pipe length is tuned to a specific length so the resulting exhaust pressure pulses resonate at a specific rpm range to optimize scavenging in 2-stroke engines. This will make the engine more efficient and more powerful. Huge gains can be has from properly tuned exhaust.
That’s a nice build!!!
Nice job on the pipe. Sounds good and nice car ! Team Associated ? The blue aluminum makes it look like one anyways...but I know theres tons of rc Company's
How’d you do it? I wanna know. Sounds awesome
Bit more detail here 😀
th-cam.com/users/shorts7eEyc8PTal4?feature=share
@@RyanH87hi
Wow very good ! Nice bike
Nicely done. Excellent project. Sending my support
That’s a sick Evo body
Sounds great
theres a reason why it is allways same look exhaust in nitros.that looking good but it take off power
Nice job 👍👍
Good thing he redid that exhaust, oil will build up in the pipe and choke out the motor, nitro engines spit alot of oil out the exhaust it needs to be able to drain
I like that remote power start. Can you make one?
The expansion chamber isn't doing anything back there, it would make waaaaaaay better power with the expansion chamber back where it was and the extension behind it. Then you could make a little resonator that would actually change the sound if that's your goal. Running it this way is gonna make
it hard to find a good tune.
Had that fitment originally but wasn't ideal for firment and surprisingly it runs almost as good as it did with just the tuned pipe on the motor. Its just a pavement basher
*Sonho em ter um desse...👉🇧🇷*
Nice sounds good I love nitro
Looks awesome from a craftsmanship standpoint, and overall aesthetics. Well done. However from a standpoint of having a good running engine it looks super restrictive, I would think you’re probably losing a lot of power… is there a reason you can’t use a shorter one?
The expansion chamber needs to be closer to the exhaust port it'll make a world of difference with the throttle response. It looks cool though.
It actually ran pretty good in that configuration, but I did re do the exhaust and the second version is how it should be and it does run a bit better now. I put another quick short up
I have that same chassis! But I swapped my stuff out for Traxxas 3s motor and esc
I’m surprised that electric start for nitro/gas rc cars isn’t a thing yet. It’s freaking 2023!
That looks cool!
That’s cool….Just curious, did you loose much HP?
I haven't really noticed any power loss to be honest. It still hits top speed pretty fast
Nice one kida 😎😎👍🏻👍🏻🇬🇧🇬🇧🇬🇧
Nice!!
Nice hsp with ez start system
Awesome 👌!! I am looking for a good quality nitro car (not monster truck). Any thoughts or suggestions for 1/8 (or 1/10)
I love it
That's a beast
Great job, what size tubing did u use
I wonder if you could make nascar style boom tubes or if they would even work at that size
Looks like the filler rod didn’t wanna deep into the joints easily. Looks decent
Bellissima ❤
Can you show us that electrical start set up👍
Ill put something together for the starter system soon
I want to see it at full throttle
I need to buy a gopro haha, full throttle with one hand is dicey. It clocked 55kph with the GPS on so its not too shabby
Fuck the exhaust!!! Did you just AutoStart that!?!😳
Haha yep. I have the same on my HPI Savage too, video on my page
That curve is very very very very very bad for the engine and performance but looks cool
Oh 100% but it's just a old VX18 so not too fussed. Wouldn't do this to my savage haha. Performance wise it needs a light tune up but still has a decent power band
@@RyanH87 oh yeah a vx18 is like 50$-70$
This popped up again and I just curious how you made it electric start. I have Hpi rs4 nitro but the clone.
Dope!
Tenho que arrumar o meu acho louco
Nice car, and it starts too, but those aftermarket axles need to go 🗑🚮
Where in the world did you get that muffler I need that
Wouldnt it have been easier to flip the header to run ot backwards, or did the starter not give the clearance for that?
It's got an electric remote starter and that sits above the exhaust manifold so I can't flip it with that on. Otherwise yea that would have probably worked to shorten the exhaust 👌
doggo😍😍😍
work of art!! Is this an hsp? Why the Red cable goes into the glowplug?
That's the power for the glow plug needed for the remote starting.
やっぱし、ラジコンカーは排気パイプが上になっちゃうよね❤
Love that body shell are you in the uk
Australia 😀
How you wire it so can start it with a button instead of using the pullstart and the ignitor
I’ll take one
Which hsp model is that? And how did you build the electric starter setup?
long expansion chamber.
good mid rpm.
How does that remote start work I'm trying to put on on my rc boat motor
Where did u buy this eletric starter
not to mention remote start. sikening
How you make it start up like that?
Hello, what kind of system did you use for automatic remote start? I want to make a system like this too. Can you share it with us?
is like a steam engine compared to electric
What is the pipe dimesions
What motor is that? Does it have 3 speeds
Tuto?😊
50% less power now
You selling this ???
Needs turbo😂
Look's! Like aaa exoudsystem bat no help fore' fast'nes.
And an electric starter?!?
So good if it stalls out in the distance, just start it up again and keep driving
i wanna know about it please reply
I put a electric starter on the motor using 3S lipo, aluminium tube to make the exhaust. Full aluminium framed chassis and components 😀
Bit more detail here 😀
th-cam.com/users/shorts7eEyc8PTal4?feature=share
Supra ratatatata?
Whats the top speed on one of these gas ones?
Gps measured 55kph down my road. Not too fast but fun enough
😂yea tell me about I have a slash 4x4 with light kits
Agar gadi bhejo to mujhe de
Just makes ur engine run like crap
Surprisingly not too noticable after a tweak with the afr
What car model? Looking to get my first nitro
si ma quanto ti pesa 3kili
Where can I get the metal kit I can't find one @ryanhooker7263
Nice, but pipe is way too long. Potentially detrimental to performance
That's the Wolunstart remote starter?
Yep sure is
You have to understand what the expansion chamber does for a 2 stroke engine. There is a maximum distance that the first chamber cone has to be from the exhaust port… in other words you completely ruined your power band and even changed your full throttle fuel ratio. This looks sick and the work is nice but you actually took away a lot of power from that engine. Not hating but thought you should know.
I want to know how you did the remote start. An of course that pipe an muffler set up sounds great
This is so sick bro!
All u need in underglow
F_cking Legend
Very nice 👌
Great work, sounds real good!